Landa model VLP4-2000B gas pressure washer with draft diverter, down stream injector, 72" variable wand with high pressure reel, 1360 hours on meter.
Clean Burn model CB3500, 350000 BTU/HR used oil heater
Marathon, model RJ-225, Commercial Compactor.
Marathon, model RJ-225, Commercial Compactor.
Cram-A-Lot, model CC-02-WM, Commercial Compactor.
Cram-A-Lot, model CC-02, Commercial Compactor.
Cram-A-Lot, model SC-T2-30, Commercial Compactor.
Cram-A-Lot, model CCR-02-WM, Commercial Compactor.
Cram-A-Lot, model CC-02, Commercial Compactor.
Cram-A-Lot, model CC-02-WM, Commercial Compactor.
Cram-A-Lot, model CCR-02, Commercial Compactor.
Cram-A-Lot, model CC-02, Commercial Compactor.
Cram-A-Lot, model CC-02-WM, Commercial Compactor.
Marathon, model RJ-225, Commercial Compactor.
Coats 5060AX tire changer.
Caterpillar Forklift, Model GP40, LP, 8000 lb. Capacity, Pneumatic Tires, 3-Stage Mast, Class III Forks, Side Shift, 9661 Metered Hours, some scratches and dings, rips in seat, no LP tank
Miller Syncowave 250 Welder, AC/DC Welding Power Source, 230/460 Volt, Single Phase, with Foot Control
Onan Trailer Type Generator, Propane Fuel, 200-Gallon Tank, Model #50KA-4R8/58K, , 50KW at 2400 RPM Engine Model #RD450-86772, 6-Cylinder Propane (liquid), Delco #1112399 Distributor, KVA-62.5 Generat
Onan Trailer Type Generator, Propane Fuel, 200-Gallon Tank, Model #50KA-4R8/58K, , 50KW at 2400 RPM Engine Model #RD450-86772, 6-Cylinder Propane (liquid), Delco #1112399 Distributor, KVA-62.5 Generat
Mitsubishi model FG18 propane powered fork lift with 130" max. lift height, 3500 # max. lift capacity, 4" x 42" forks, hard rubber non-marking tires (worn) 4062 hours on meter at time of setup, (in ru
Mitsubishi model FC18 3500# capacity propane fork lift with 130" max lift height, 4" x 42" forks, solid rubber tires, 8281 hours on meter, (equipped for side shift but does not have it) in running con
Tomcat 350 rider scrubber with (2) 45" squeegees with gum rubber blades with (1) 17" pad
Hurco KM3 CNC Vertical Mill, 42 inch x 12 inch table with Hurco KM-3 Ultimax control, 3 phase/480, Mfg 1990
1997 DeeBlast Model RA60x48, Dust collector and work platform
Do All Model C-9 Metal cutting band saw, power head, 3 phase/ 200 volt with 60 inch roller conveyor, Mfg 1971
Niagara 3/8 x 10 foot power squaring shear. 5/16 Stainless, 3/8 mild steel, Serial number 58229, Model # 910, Mfg 1963
KR Wilson model 37K, 100 ton capacity hydraulic press with 45" between uprights, adjustable height between 16" and 24"
Bridgeport series I, 2 Hp vertical milling machine with a 42" width x 9" depth table, Newall Topaz X-Y axis unit, 40 degree tilt on head, approx. 24" front to back travel
Bridgeport series I, 2 Hp vertical milling machine with a 42" width x 9" depth table, Mitutoyo X-Y axis unit, 40 degree tilt on head, approx. 24" front to back travel
Caterpillar model V50DSA, 4200# capacity propane fork lift with 156" max lift height, 5" x 46" forks, solid rubber tires, (4 tires on front), 7516 hours on meter, in working condition with minor hydr
Caterpillar model GP30,6000# capacity fork lift with 187" max lift height, 7" x 46" forks, solid rubber tires, side shift attachment, 9136 hours on meter, in working condition,
Cram-A-Lot, model CC-02-WM, Commercial Compactor.
Cram-A-Lot, model CCR-02-WM, Commercial Compactor.
Marathon, model RL-225, Commercial Compactor.
Marathon, model RJ-225, Commercial Compactor.
Cram A Lot, model CCR-02-WM, Commercial Compactor.
Cram A Lot, model CCR-01, Commercial Compactor.
Cram A Lot, model CCR-01, Commercial Compactor.
Marathon Model # V 3060 Vertical Baler. Cylinder 6" Bore, auto - eject, Bale size 60" wide x 30" deep, 10 HP, 230/460 volt 3 phase
Daewoo model G20E-3 propane powered ride on fork lift 4000# capacity, vertical 127", 4" width x 48" length forks, 7172 hours, propane tank not included
Yale model GLP040AFNUAF084 propane powered ride on fork lift 4000# capacity, vertical lift 128.7", fork dimensions 4" width x 42"length forks
Yale model GLPO40AFNUAF084 propane powered ride on fork lift 4000# capacity, vertical lift 128.7", fork dimensions 4" width x 42" length
Crown model RC3020-30 36 volt rechargeable stand on fork lift 2750# capacity, vertical lift capacity 190", fork dimensions 4" width x 42" length, 5674 hours, unit is partially operational forks will r
Daewoo model G20E-3 propane powered ride on fork lift 4000# capacity, vertical lift capacity 127", fork dimensions 4" width x 42" length, 6029 hours
Nissan model P102A20PV propane powered ride on fork lift 4000# capacity, vertical lift capacity 130", fork dimensions 4" width x 42" length, 6872 hours
Yale model MSW040SEN24TV087 24 volt rechargeable walk behind walkie stacker fork lift 3800# capacity, vertical lift capacity 130", fork dimensions 4" width x 42" length, 2414 hours, appears to be oper
Daewoo model G20E-3 propane powered ride on fork lift 4000# capacity, vertical lift capacity 127", fork dimensions 4" width x 41" length, hours 5496, propane tank and key not included
Yale fork lift model GLP040AFNUAF084 (Working condition unknown, unable to test), hours unknown, propane powered, appears to be in fair condition.
Hyster fork lift model H40XMS propane powered (Working condition unknown, unable to test), hours unknown, upholstery seat in bad shape.
Nissan fork lift model MPL01A20LV (Working condition unknown, unable to test), propane powered, hours unknown, seat is in bad shape.
Yale fork lift model GLP040AFNUAF084
Schelling model FM 430/410, 220/440 volt, 3 Ph, panel saw with Shelling control, 196.85-FPM max. head travel speed, 163" cutting length, front loading, saw blade protection (Mfg. 2001)
Schelling model FM 430/410, 220/440 volt, 3 Ph, panel saw with Shelling control, 196.85-FPM max. head travel speed, 163" cutting length, Saw blade protection, front loading, (Mfg. 2002)
Schelling model FM 430/410, 220/440 volt, 3 Ph, panel saw with Shelling control, 196.85-FPM max. head travel speed, 163" cutting length, front loading, (Mfg. 2002)
Schelling model FM 430/410, 220/440 volt, 3 Ph, panel saw with Shelling control, 196.85-FPM max. head travel speed, 163" cutting length, front loading, (Mfg. 1998)
Schelling model FM 430/410, 220/440 volt, 3 Ph, panel saw with Shelling control, 196.85-FPM max. head travel speed, 163" cutting length, front loading, (Mfg. 1998)
Schelling model FM4 430/410, 220/440 volt, 3 Ph, panel saw with Shelling control, feeder travel up to 262-FPM, saw travel speed 394 FPM, 13.97" saw blade, 20 Hp saw motor, 169" cutting length, front l
IMA model Advantage 700, 220/440 volt, 3 Ph, edge bander with (53) FPM 5/16" to 2 3/8" panel thickness, 6" panel length, 2" to 9/16" panel width, 1/64" to 2" edging thickness, 1/2" to 2 9/16" edging h
Quincy model Q3B0ACA3250, 220/440 volt, 3 Ph, rotary screw type air compressor with 30- Hp motor, cabinet style, 55324 hours on meter at time of setup, Includes (1) ACE model CK-4.0A air dryer with 1
Quincy model QT-15, 15 HP, 2 stage, piston type air compressor with approx. 75 gal. horizontal tank, Baldor electric motor (believed to be 220/440 volt, 3 Ph, wires cut)
Yale model 0S030EAN24TE089, 24 volt electric order picker with 3000 # max. lift capacity, 195" max. lift height, (2) 4" x 42" forks, 2137 hours on meter, Manufactured 1999. (in running condition). Inc
Yale model ERC040AGN36TE084, 36 volt electric fork lift with 4000 # max. lift capacity, 188" max. lift height, side shifter, hard rubber non-marking tires, 5" x 54" forks, 11422 hours on meter (seat h
Yale model ERC040AGN36TEA2, 36 volt electric fork lift with 4000 # max. lift capacity, 189" max. lift height, side shifter, hard rubber tires, 4" x 42" forks, 8865 hours on meter (seat damaged, in run
Clark Reach Truck, model NTR17, with side shift and tilt, 36 volt, includes battery, 42 inch forks, 3500 lb lift capacity, maximum height 189 inches, 2,244 hours
Ben Pearson Exhaust Pipe Bender with Various Size Shoes and Attachments, with Parker Directional Control Valve, Model# BC4TC, 240volt, 3000 PSI Max, On Casters
Ammco Rotor & Disc Brake Lathe, Model# 6900, 115/230volt, Single Phase, 1-HP Motor
EW BLISS 499 Sheet Metal Shear, 7-1/2 HP, 220/440 Volt, 3-Phase, 10' 6" Shear Length
Presto Lift Forklift, 12V, 2000lb Capacity, Model #PS 262, Build Date: 8/20/09
DoAll Horizontal Bandsaw Model# C-916M
Milltronics Partner I, 220/440 volt, 3 Ph CNC vertical milling machine, 12 position tool changer, 6" Kurt machinist vice, 40" x 12" slotted table, 30" x 16.5" x 20 XYZ travels, Milltronics Centurion 6
DaeWoo Puma model 10HC, 220/440 volt, 3 Ph, CNC lathe with 3 jaw chuck, 10 position tool changer, Equiped with Tail Stock, Fanuc Series O-T digital read out, X and Z axis
DaeWoo Puma model 200, 220/440 volt, 3 Ph, CNC lathe with 12 position tool changer, 3 jaw chuck, tool measurer, equiped with tail stock, Fanuc model 21-T digital read out, (MFG. 1999), (1) Sameca mode
Clausing Colchester 15, 220/440 volt, 3 Ph geared engine lathe with 3 jaw chuck, 25 - 2000 RPM spindle speed, digital read out (not working) , 15" swing, 5' travel
HYD Mech model S-20A, 220/440 volt, 3 Ph band saw with power feed, approx. 18" working width, digital read out, push button controls
Bridgeport series I, 220/440 volt, 3 Ph vertical milling machine with 60 to 4200 RPM spindle speed, Wilton 6" machinist vice, 48" x 9" table, push button controls, Anilam model Wizard 211 digital read
Clausing Colchester 15, 220/440 volt, 3 Ph geared engine lathe with 3 jaw chuck, 25 - 2000 RPM spindle speed, 15" swing, 5' travel
Toyota model 5FBCU15, 36 volt electric fork lift with 189" max. lift height, 2870 # max. lift capacity, side shifter, 4" x 42" forks, hard rubber non-marking tires, hours on digital meter unknown
Toyota model 5FBCU15, 36 volt electric fork lift with 189" max. lift height, 2870 # max. lift capacity, side shifter, 4" x 42" forks, hard rubber non-marking tires, 15722 hours on digital meter, Inclu
Toyota model 5FBC15, 36 volt electric fork lift with 189" max. lift height, 2600 # max. lift capacity, side shifter, 4" x 42" forks, non-marking tires, 1922 hours on digital meter. Includes (1) Exide
Crown model E, 25 volt electric order picker, 198" max. lift height, 3000 # max. lift capacity, 4" x 42" forks, hours on meter unknown. Includes (1) Exide model D3E-12-850, 240/480 volt, 3 Ph input,
Toyota model 7FBCU15, 36 volt electric fork lift with 189" max. lift height, 2600 # max. lift capacity, side shifter, 4" x 42" forks, 3903 hours on digital meter, Includes (1) Exide model D3E-18-1050,
Perfect Cycle Model HP1200 Reclamation Machine
Struers Rotary Polisher Model RotoPol-22, 2-10" Polishing wheels, w/Stuers Model Roto Force-4 Rotary arm. Model Lupo auto Dose Dispenser, Model Multidoser 6-Station Chemical Dispenser w/Model Roto Com
Marvel Industrial Band Saw, 15'6" Blade, Hydraulic Feed, Automatic Counter, Model # 15A4, 240/440, 3-Phase, Hydraulic Clamp, Works
Kaiser Diesel Generator-12KVA; Rated @ 12KVA, Surge Rating @ 14KVA, 60 Hz, 120/240 Single Phase, Skid-Mounted for ease of transport, Unit was running properly until cooling fan to power converter unit
Millermatic 250 MIG Welder, Tank Is Almost Full, 200/230/460 V Single Phase
Northfield Uni-Point 17 Radial Arm Compound Miter Saw; Power 230/460, purchased in 2000
Massey Ferguson 204 Forklift, Gas Motor, Works and Runs
Gehl Forklift 883, 8,000 lb. Capacity, 34' Lift, 6.5' Reach, John Deere Turbo Diesel Engine, 3817 Hours
Nissan fork lift, M#CPT01A18PV, 3500lbs, 6574.3 hours, cushion tire, mast - 82/187 triple with side shift and load back rest, 36" forks, suspension seat with belt, sells with aluminum L/P tank
Strippit Fabri-Center 1250 M CNC Turret punch press, 42 tooling stations, 33 metric tons of punching, 2 auto-index stations 50" throat. 80" x asis
Amada Lasmac 667 II Laser, 1800 watt, model LC-667, Fanuc model OM-L LTD Controls, PRAC model AM 2000 Resignator, Mfg. 1990, chiller included. Amada Lasmac 667 II Laser, 1800 watt, model LC-667, mfg
Amada Lasmac 667 II Laser, 1800 watt, model LC-667, mfg date: 1992, Fanuc Model OM-L LTD Controls, PRC model AM 2000 Resinator, includes (2) 60" x 120" roller bearing auxilary tables, new blower insta
Amada Vipros 367 CNC Turret Punch, model VP 306072, 30 Ton Capacity, 45 Turret Stations, 35 KVA, weight: 14 Ton, mfg date: 1994, Amadan 04P-C controls, thick turret, auto indexing
Cram A Lot, model CCR-02-WM, Commercial Compactor.
Cram A Lot, model CC-02-WM, Commercial Compactor.
Cram A Lot, model SC-T2-30, Commercial Compactor.
Haas CNC Mill, Model # VF-0, 208/230 Volt, No Monitor, 3-Phase
JLG Industries Scissor Lift 2033E, 750lb Capacity, 115-Volt Built in Charger, All equipment information has faded from nameplate
Milltronics Manufacturing Partner I CNC Machine Model PI Series H, 240-Volt, 3-Phase
Gallmeyer and Livingston Co Industrial Grinder Model 280, 480-Volt, 3-Phase, Sells with Coolant Pump and Tank, 115-Volt, Magna Lock
Hyster Forklift Model #H80C, 8,000lb Capacity, with LP Tank, Runs and Operates, 995 Metered Hours, Side Shift
DoAll Metal Cutting Band Saw, Model C-916
Somua Lathe, 32"-14", Spindle Speeds 800 to 160, 125 to 25, 50 to 4
Somua Lathe, 32"-14", Spindle Speeds 800 to 160, 125 to 25, 50 to 4
Kysor Johnson model V-16, 440/220 volt, 3 Ph industrial band saw with work selector, speed control, 23" x 23" adjustable height/adjustable tilt table, 133" to 140 7/8" blade, blade welding unit with g
PETTIBONE MODEL 30 HYDRAULIC CRANE, 1974, 4x4, 30 TON, 1406 METERED HOURS
MASSEY FERGUSON MODEL 204 ROUGH TERRAIN FORKLIFT, CONTINENTAL Z134 4 CYLINDER GAS ENGINE, 4000 LB CAPACITY, 21"
PETTIBONE B66C ROUGH TERRAIN EXTENDABOOM FORKLIFT, 4X4, DIESEL ENGINE, ROPS, 5509 METERED HOURS
GROVE MZ46CXT ROUGH TERRAIN BOOM LIFT, 1998, GAS/LP, 4x4, 40' CAPACITY, 6738 METERED HOURS
VERMEER LM42 CABLE PLOW, DIESEL, 4 WD, WALK BEHIND, 757 METERED HOURS
DITCH WITCH 410SX CABLE PLOW WITH TRENCHER, DIESEL, 4 WD, WALK BESIDE, BORING ATTACHMENT, 1841 METERED HOURS
DITCH WITCH 350SX CABLE PLOW WITH TRENCHER, DIESEL, 4 WD, 1322 METERED HOURS
Kwik Way 797 Flywheel Grinder, 230volt, 3-Phase
Kwick Way 092 Power Stroke Cylinder Hone, Single Phase, 115volt
Hydro-Tek SW30004V Pressure Washer, 3000 PSI, 4 GPM, 12-Volt Burner, Diesel or Kerosene, 16 HP Vanguard Motor
Kent Mill Model KT-5VK, Hi-Lo Speed Range, 70-550/550-3800
Onan Generator; Model: 85.CKR.15R/925IN, 85kw, 3 Phase, 277/480V, 60Hz, 4-Cylinder Gasoline Engine. Removed in working condition, had scheduled maintenance on a yearly basis, has some minor rust and s
Mark 60' Aerial Lift, Manufactured by Mark Industries, Model #62, Rated Capacity 800 lbs., 2-Wheel Drive, Wisconsin VG4D Gasoline and Propane, Tires 15-19.5 12-Ply, 5222 Hours, Non-Running
2003 Bobcat T-190 Turbo; Diesel Powered, 3 Hydraulic Outlets, 1 Electrical Outlet, 73? Wide Bucket Size, Kubota 2.0 4-Cylinder Diesel Engine, 3977 Hours, Approx 95% Tire Tread, New 13? Wide Tracks, so
Bobcat 753, Diesel Engine, 4924 Metered Hours, Service Records, Parts and Operator Books in Cab
Satoh S650G Tractor. Small tractor with Work Horse front end loader attatchment. It has a 4-cylinder gas engine that produces aprox. 25 hp. The engine has new main bearings. The tractor starts and run
New Atlas Copco Twin Screw Compressor, GA22
Toyota Forklift Model #426FGU25, 3-Stage Mast Lifts 189", 42" Forks with Side Shift, 5,000 lb. Capacity, Dual Fuel LP/Gas, Pneumatic Tires, Runs, 12,835.6 hrs
Hyster Forklift Model #S40XL, 3-Stage Mast Lifts 187", 42" Forks with Side Shift, 4,000 lb. Capacity, LP with Tank, Solid Tires, runs
Clean Burn Multi Oil Furnace, Model CB86BH, 225,000 BTU, Worked When Removed, no tank
Hobart model 5801, 200/230 volt 3-phase stainless steel meat band saw in fair condition
Hobart model UWS 120/208-240 volt single phase ultima automatic scale and wrapping system
Tracer FS Floor Sweeper by Quadra M#QTFSG, GVWR 2240, Runs on Gasoline, Liquid Cooled V-Twin, 271.4 Metered Hours, Ride-On
Carpagiani Ice-Cream machine, model: LB-502, 208/230 volt, 3-phase
Tennant Floor Scrubber, Has Key, Battery Charger, and Manual, with Attachments, 295 Metered Hours, Model #5700-XP-5958, Series 700-5958
SCMI Sliding Table Saw M#SI16 WA, 230-Volt, 3-Phase
Crown Wave Order Picker, Built-In Charger, 24-V, Model 5084, Up to 84", 300lbs Driver and 200lbs Load Capacity, Parts and Service Manual in (JO), with Working Safety Switches and Sensors
Jet-A-Way Oil Burner Model 2500, 250,000 BTU
Conair Vacuum Loader Model 10032726, 25hp Motor, 230/460-Volt, 3-Phase
Oakley OSC Edge Sander, Model#H-6 3-HP, 3-Phase
Paoloni Table Saw, Model# P300, 9-HP, Scoring Blade, 10'6" Sliding Table with All Attachments
Oliver 24" Planer, Model# 299-D, 5-HP, 3-Phase, Spiral Carbide Head with Grinder
Delta 16" Jointer, Model# RJ-42, 5-HP, 3-Phase, 4 Knife Head Carbide
Hunter Scissors Lift, Model 1526, 750 lb. Capacity, 24 Volt, 16' Height Capacity
Cincinnati 18" Lathe, 6' Between Centers, 5 HP, 3-Phase, 220/440 Volt, with Bucket full of Tools, Wrenches, Chuck Jaws, Holders
1997 Case 200TX Horizontal Directional Boring Machine, Diesel, with Bits and Approx (25) 10' Poles, 4551 Metered Hours, 1-Track is has a tear in the track
2003 Lift King Hi-Lo, Off Road, Cab Heat, Diesel, Model LK8M22, 14' Lift Height, 8,000 lb. Capacity, 9285 Hours, 16.9-24 Tires, 71" Class III Forks
Case 430 Skid Steer, 2006 year, front hydraulic outlets, in cab hydraulic quick attach bucket 72" Bucket, Cummins Diesel Motor, 3455 Hours
KX41-2 Kubota Mini Excavator 16" Bucket, 1900 Hours 1998 year 2 way backfill bade
1994 Caterpillar 312 Excavator, 84hp Diesel CAT 3064T, 9'10" Stick, 1-Piece Boom, Track Length is 11'5", 8817 Metered Hours
General 550 Dig-R-Mobile multipurpose drill rig, includes tool box with accessories, approximate 30? of 2? augers, 17ft. of 6? auger and 1- 12 ?? auger
Tennant 7200, 36 volt rechargeable sit down floor cleaner. 36 volt charger
Yale model GLP040AFNUAF084 approx 4000# capacity propane powered fork lift comes with side shift 4" x 42" forks
Yale model GLP050RGEUAE090 approx 4000# capacity propane powered fork lift with side shift
Clark model CMP+E609L propane powered fork lift with 189" max. lift height, 5050 max. lift capacity, 5" x 4" forks
Hurco model BMC-20, 220/440 volt, 3 Ph, CNC machine with 3 jaw chuck, 22" X, 14 Y, 14 Z travels, 16 ATC, 6" Kurt machinist vice, digital read outs
Mazak model 10N Quickturn, 220/440 volt, 3 Ph CNC lathe with 3 jaw chuck, 27" center to center, Mazatrol Cam T-2 digital controls
Clausing Kondia model FV300, 220/440 volt, 3 Ph, vertical milling machine with 58" x 11" table, 6" machinist vice, 60 to 400 spindle speed, Mitutoyo digital read out
Uni-Hydro model 42-14, 220/440 volt, 3 Ph Iron worker with 3" x 3" x 5/16" max. cut angle, 3/8" x 14", 1/2" x 10", 5/8" x 6" max. flat bar, 42 ton max. punch capacity, (working condition unknown, coul
Aviator model XL, 220/440 volt, 3 Ph CNC plasma cutter, S/N G841 and (1) Burny model 1250 operator control system and 150" x 87" bed.
Lincoln Power Mig 350, 220/440 volt, 3 Ph, welder with approx. 10' of hose, gauges, gun and (1) spool of welding wire
Doall model C-916M, 220/440 volt, 3 Ph band saw with 158" band, 8" vice, 2 Hp electric motor (MFG. May 2110). Includes (1) 130" long x 31" height x 24" depth conveyor system.
Lincoln Power Mig model 300, 220/440 volt, welding power supply with 10' of hose and gun
Lincoln Power Mig model 300, 220/440 volt, welding power supply with 10' of hose and gun
Raymond model EASI 24 volt, 4000 # capacity stand up fork lift with 190" max. lift height, 4" x 42" forks, side shift, (hours unknown). Includes GNB model SCR100-12-600S1, 24 volt charger (input volt
2005 Ford F-650 International A210 Diesel Motor, 191,919 Odometer Miles, Auto Trans, AC, Piedmont Utility Tire Service Truck Bed Built Out of Aluminum, Has Rear Hose and Thieman Rear Liftgate. Non-Run
1998 Ford Crane Truck; 8.3 Liter Cummins Diesel Engine, 165,786 Miles, Manual 8-Speed Transmission.
Speedaire EB5 air powered drill press, 150 PSI, with 4 head pneumatic drills, 2800 RPM, 48" long x 30" wide x 60" high
Edge Master GP machine made by Anderson Manufacturing, cat # EM72, 115/230 volt with automatic feed with 2 porter cable routers, glue dispenser, 76" long x 22" wide
Dust-Ex collector machine, model # DT-100, 10 HP, 230/460 volt, 3 chamber, 9' long x 24" wide with all duct work included
Clark Model GLS-25WC LP Hi-Lo, 5,000 lb. Capacity, Hard Tire, 2-Stage Mast, 41" Forks, 9050 Metered Hours, 123" Lift Height, Sells with Propane Tank
JLG Commander 2046 24 Volt Electric Scissors Lift, Model CM-2046, 1000# Capacity, 20' Hight, Manufactured in 1995, has Newer Batteries, Sells with (2) Controllers
Thermal Arc Power Plus Explorer TA-8/300, Kat Welder Generator, Kubota 3-Cylinder Liquid Cooled Diesel Engine, New Battery, 10-Gallon Fuel Tank, Multi-Purpose Welder including Mig, Stick, Lift Tig, Ca
Ingersoll Rand Air Compressor, M #SSR-EP15, 15 HP, 53 CFM, 230/460 Volt, 3-Phase
Ingersoll-Rand Air Compressor SSR-EP15U, 15 HP, 55 CFM, 230/460 Volt, 3-Phase
Littlesam Lift and Hoist, Model LS22SW, Extends to 21' and Swivels, Pull-Behind on Wheels, Operates by Electric Over Hydraulic, 4200# Winch, with Drywall Attachments, Log Tongs and Cradles, 66" Wide x
Smith Mite-E-Lift Scissors Lift, 1500lb Capacity, 24-Volt, Built In Charger, Extendable Platform, Foam Filled Tires, (1) Tire has small tear
Yale Forklift, 6259 Metered Hours, 5000lbs, LP, Model#GLC050RFNUAE076, Mast 76/187 Triple Stage with Side Shift, 42" Forks, Said to have Carriage Reshimed and New Slides Installed in Side Shift Unit,
Delta RE 35 table saw, model # 34794, 230/460 volt, 3 Phase, with guards and fence, with dust collector system, 79" long x 50" wide, with retractable stand
Yale electric fork lift, model # ERC080HBN36SE075, battery type E, 36 volt, truck weight 14520lb. with side shift, 3 stage mast, pneumatic tires, 42" forks, hours unknown, 8000lb. Lift max, comes with
Ritter Manufacturing air powered cabinet press, model # R875, date of manfacture 1/28/2005, 74" long x 36" wide x 55" high
Edge Master GP machine made by Anderson Manufacturing, cat # EM72, 115/230 volt, with automatic feed with 2 porter cable routers, glue dispenser, 76" long x 22" wide
Dust-Ex collector machine, model # DT-100, 10 HP, 230/460 volt, 3 chamber, 9' long x 24" wide with all duct work included
Ingersoll Rand Light Source, Light Tower, Trailer; Model: LTSRCA 60Hz SSTRD, 3-Cylinder Diesel Kubota-Model: D905, Ingersoll Rand Generator-Serial: 390819UHRC13, Light Source-Model: A/2007, 1652 Hours
Nobles ByTennant model SS SCRUBBER 24 volt rechargeable electronic floor scrubber (Working condition unknown, could not test), hours approx 429.6, key not included
Hartford Tanisaka Model 10-400 Thread roller
Hartford Tanisaka Model 10-400 Thread roller
NO. 40 Waterbury Horizontal Hand Feed Thread Roller 4-1/8 die pocket
Crown model TS, 4000 # capacity, 72 volt electric side swing order picker with 4" x 42" forks, single stage 10' mast, approx. 20' cab lift, non-marking hard rubber wheels, (hours unknown)
RMG model 89-2063-20, 460 volt, 3 Ph autodraw machine
RMG model 89-20T0-22, 460 volt, 3 Ph autodraw machine
RMG model 89-1085-85, 440 volt, 3 Ph autodraw machine
Toyota model 42-6FGCU30, 5800 # capacity propane powered fork lift with 5" x 42" forks, solid rubber tires, side shift attachment, 187" max. lift height, 15815 hours on meter (in running condition)
Apex model MD3984 broach machine with built in parts conveyor and controls. (unit rebuilt in 1981)
Raymond model 537-CSR30T, 48 volt electric fork lift with swing attachment, 3000 # max. capacity, 4" x 38" forks, Intellidrive 2 push button and joystick style controls, (hours unknown) Includes charg
Raymond model 537-CSR30T, 48 volt electric fork lift with swing attachment, 3000 # max. capacity, 4" x 38" forks, Intellidrive 2 push button and joystick style controls, (hours unknown) Includes charg
Komatsu model FG25ST-11, 4170 # capacity propane powered fork lift with 188" max. lift height, 4" x 42" forks, side shift, solid rubber tires, 271 hours shown on meter
Cincinnati Milacron Talon-210,480 volt,3 Ph CNC turning center, with a Acramatic model 850SX control unit and 13"screen.CINCINNATI MILACRON'TALON'CNC TURNING CENTER Model 210,New 1994 EQUIPPED WITH:Ac
Yale - Lift Truck w/ Battery Charger. Model# ERC1001TGN36TV108. Max Capacity 16000LBS. Hours-9456. Truck Weight w/ Battery:16900LBS. Battery Type:E.36 Volts. Used. 2593-GL
Caterpillar Propane Forklift (propane tank not included) model #GC15K, 2,000 pound lift capacity ,42 inch forks, side shift ,188 inch maximum lift height, 83 inch lowered height, 8,877 meter hours, 6,
Caterpillar Propane Forklift (propane tank not included) model #GC15X, 2,000 pound lift capacity ,42 inch forks, side shift ,188 inch maximum lift height, 83 inch lowered height, 9,373 meter hours, 6,
John Deere 480B Forklift, 1977 2-Wheel Drive, 4-Cylinder Gas Engine, 21' Straight Mast, 3-Stage Lift, completely serviced and greased recently, Side Shift, 1108 Metered Hours
Terex TS20 Electric Scissor Lift, 20ft Lift Height, Power to Platform, Extendable Platform, Operational When Removed From Service July 2010, 418 Metered Hours, Hard Non-Marking Tires
Skyjack SJ507 Gas/LP Powered Scissors Lift, 4-Wheel Drive, V4 Wisconsin Motor, Extendable Platform
Snorkel SLH 3284 HD Gas/LP Powered Scissors Lift, 2505 Hours, 3-Cylinder Motor, Extendable Platform
Caterpillar 36 volt hi/lo forklift, model:EP16KT, hour meter reads 485.9, 3 - stage mast, 48" forks, 2750lb lift capacity, solid rubber tires, comes with Hawker power source 36 volt charger, 220 volt,
Mitsubishi LP Hi-Lo, Model #FGC25, 6023 Hours, 3-Stage Mast, Side Shift, Pneumatic Tires, 5,000 lb. Lift, 42? Forks, Runs and Drives
Mitsubishi Electric Hi-Lo, Model #2FB030, 36-Volts, 3-Stage hard Tires, Max Lift Height 130?, 6,000 lb. Lift Max, 42? Forks, Hours Unknown
Kalmar AC Hull Lift Truck, Stand up HI/LO, model:OP30, 3000lb capacity, 3 - stage mast, 24 volt electric, comes with Ranger Elite 24 volt charger, Model FR12CE450E, has broken windshield
Greenly Cable Puller 6501 Tugger, 120-V, 5000# Max Pulling Load, 4000# Continuous Duty, 300' of 26,000lb Polyester Composite Rope, Appears to have very little use, Said to be used approx (3) Times
John Deere 480B Forklift, 1977 2-Wheel Drive, 4-Cylinder Gas Engine, 21' Straight Mast, 3-Stage Lift, completely serviced and greased recently, Side Shift, 1108 Metered Hours
Baxter model 0V300E, electric mini rotating rack oven, 208 volt, 3-phase includes manuals, installation materials, 48" width x 48" height x 37 1/2" depth, 2-door electronic display on front and (1) st
Lincoln model 1132-002-U-K1841 208 volt 3 phase commercial pizza oven
Baxter model OV300G 120 volt natural gas Mini Rotating Rack commercial oven 95000 BTU / HR
Bridgeport 2 HP Series I Variable Speed Mill, 9 x 42" Table, Mitutoyo 2 Axis DRO
Johansson Model 5400 4X12 Heavy Duty Radial Drill, Table working surface 19 x34
Van Dorn Model 400-RS-60F-HS-HT injection molding machine. 60oz shot, 400 ton, 28" X 28" between tie bars (1991).
Van Dorn Model 400-RS-60F-HS-HT injection molding machine 60oz shot, 400 ton, 28" X 28" between tie bars (1991)
Van Dorn Model 400-RS-60F-HS-HT injection molding machine, 60oz shot, 400 ton, 28" X 28" between tie bars (1991)
Van Dorn Model 400-RS-30F-VV-HT-VB injection molding machine, 30oz shot, 400 ton, 28" X 28" between tie bars (1989).
Van Dorn Model 400-RS-60F-HT injection molding machine, 60oz shot, 400 ton, 28" X 28" between tie bars (1991).
Van Dorn Model 500 HP-60FLP Injection molding machine, 60oz shot, 500 ton, 32" X 36" between tie bars (1992).
Van Dorn Model 500-HT-60F injection molding machine, 60oz shot, 500 ton, 32" X 32" between tie bars (1994).
Van Dorn Model 500-HT-60F injection molding machine, 60oz shot, 500 ton, 32" X 32" between tie bars (1994).
Van Dorn model 700H-RS-125F-CULP injection molding machine, 125oz shot, 700 ton 36" X 45" between tie bars (1991).
Van Dorn Model 700H-RS-165F-OV-LP injection molding machine, 165oz shot, 700 ton, 36" X 45" between tie bars (1990)
Mokon Model DT4309-cl thermolator
Van Dorn Model 500H-RS-60F-LP injection molding machine 60oz shot, 500 ton, 32" X 36" between tie bars (1993)
Van Dorn Model 1000 H-RS-260F injection molding machine 260oz shot, 1000 ton, 45" X 60" between tie bars
Van Dorn Model 170-RS-14F-HT Injection molding machine, 14oz shot, 170 ton, 20" X 20" between tie bars (1990).
Van Dorn Model 120-RS-8F-W-HT injection molding machine, 8oz shot, 120 ton, 17" X 17" between tie bars. (1988). (MISSING PARTS)
Van Dorn Model 120-RS-8F-W-HT injection molding machine, 8oz shot, 120 ton, 17" X 17" between tie bars.
Conair Franklin model DC100 "Comp-Dry" computer controlled dryer
Van Dorn Model 120-RS-8F-W-HT Injection Molding machine, (1988) 8oz shot, 17" X 17".
Van Dorn Model 120-RS-8F-W-HT Injection Molding machine, (1989) 8oz shot, 17" X 17". (MISSING PARTS)
Van Dorn Model 120-RS-8F-W-HT Injection Molding machine, (1989) 8oz shot, 17" X 17"
Van Dorn Model 120-RS-8F-W-HT Injection Molding machine, (1990) 8oz shot, 17" X 17"
Van Dorn Model 120-RS-8F-W-HT Injection Molding machine, (1990) 8oz shot, 17" X 17" between tie bars, 120 ton
Van Dorn Model 120-RS-8F-W-HT Injection molding machine, 227 (1993), 8oz shot, 17" X 17" between tie bars
Conair franklin model CD200 computer controlled dryer
Cumberland model 3KN grinder, with 16" X 20" opening, 40 Hp
Clark model CHY160B 20,000lb capacity pneumatic tire fork truck, LP gas, 144 inch lift, 72 inch forks, runs/drive/works
Johansson Model 5400 4?X12? Heavy Duty Radial Drill, Table working surface 19 ??x34 ?
Genie model GS-1930 scissor lift, no other information available, data plate missing, unit works.
Nissan model KAPH02A25PV approx 4000# capacity propane powered fork truck
Nissan model PJ02A20PV approx 4000# capacity propane powered fork truck
Daewoo model G20E-3 approx 4000# capacity propane powered fork truck
Daewoo G20E, sit down ride on fork lift model G20E-3, SN/CX-05623, propane powered, does NOT include key
Yale model GLP040AFNUAF084, propane powered riding fork lift, max lift capacity 4000 lbs, max vertical lift 129", forks are 4" width x 42" length, hours on meter unknown
Nissan model P02A20PV, propane powered ride on fork lift, max lift capacity of 4000 lbs, max vertical lift approx 124", forks are 4" width x 42" length, 4514 hours on meter
Genie model GS-1930, 24 volt rechargeable 500 lb max capacity platform lift, max platform height 15' at 250 lbs, 542 hours on meter, appears to need repair
Yale model GLP040AFUAF084, propane powered riding fork lift, max lift capacity 4000 lbs, max vertical lift 129", forks are 4" width x 42" length, 3820 hours on meter, key included
Nissan model # KAPH02A25PV Type LP sit down propane forklift w/ max load capacity 3615 #?s, hrs 4097.2
Hyster model H40XMS type E sit down propane fork lift working condition fair with a maximum load capacity of approx 4000#, hours approx 11614.2, key not included, appears to have rust
Pan-Cut Model PC-133 Vertical Panel Saw, 230 Volt, 13' Long
Bridgeport EZ Path Industrial Lathe, 208-Volts, 3-Phase
Caterpillar 50 LP Forklift, Model GP25, Info Tag is pulled off, 3-Stage Mast, 48" Forks, Side Shift, 8354 Metered Hours
Komatsu 40 Forklift Model #FG40C-5, Gas, 8200# Capacity, 2-Stage Mast with Side Shifter, 2160 Metered Hours
2001 ESAB Avenger 1 Plasma G with Water Table and Accessories, Avenger 1, 460V, 1 Phase
Lincoln Arc Welder, Towable, SA200DC, Pipeliner Special, Continental Gas 4-Cylinder Engine, Takes 2" Ball, 50' Reg. and 100' Pos Leads, New 14" Tires, works/welds
Clark Model C500 Y30 Hi-Lo 3,000 lb. capacity, Propane, 2-Stage 130" Lift, 46" Forks, Pneumatic Tires, Sells with Tank, runs, may need some brake work
Easy Kleen Magnum 4000 Gold Hot Water Pressure Washer, comes with Hose and Wand, Electric Start, missing wand fittings
Easy Kleen Magnum 4000 Gold Hot Water Pressure Washer, comes with Hose and Wand, Electric Start, missing wand fittings
AEM Model 6A-5379S 24" Belt Sanding Machine, with Extra Belts
Super Max Model VMC 16VS Vertical Mill, Mitutoyo DRO, 8" x 48" Power Feed Table, Variable Speed
SCM Model T-130N Spindle Molder Machine, with Overhead Drive Arm, and Manual
2000 Skyjack SJIII 4626 Scissors Lift, 26' Height, 24-Volt, 850lb Capacity
Grove model SM2633 aerial lift ?Nugget Series?. Deck height 20?, working height 26?, deck retracted 96?, deck extended 128?, height 87?, width 33?, railings removable, 24 volt system with onboard char
Tuff Vac 8000 Towable Vacuum, PTO/Hydraulic Power, Pinstyle Towable
Case Forklift 586E, 4,000 lb. Capacity, 21', 2199 Hours on Meter, 4-Speed, 4 Cylinder Diesel Motor, 48" Forks
Yale - Lift Truck w/ Charger. Model# ERC100HGN36TV108. Hours-12024. Volts: 36.
Yale - Lift Truck. Model# ERC100GHN36TV108. Max Capacity 16000LBS. Hours-9456. Truck Weight w/ Battery:16900LBS. Battery Type:E. Volts: 36.
Crown - Electric High Peach Order Picker Lift. Model#: 30SP48TT. Weight: 6770. Mast ID: 30SP48TT-360. Hours: 591.1. Fork Length: 84". Battery Type: E. Max Lift Gate Height:24'. Truck Type: E. 13' Mast
Crown Stand-Up Reach Order Picker. Model #: 30SP48TT. Track Type: E. MAST ID# 30SP48TT-360. WT: 6770LBS. Battery Type: EO. Fork Length: 84". Max Lift Gate Hgt.: 24'. Truck Type: E. Masts: 12'
Crown - Stand - Up Order Picker Lift. Model#: 30SP48TT. Total Hrs: 1190.3. Mast ID: STT36042-W544 . Fork Length: 84". 12' Mast.
Genic Lift. Model #: AWP305. Serial #: 3896-2231. Max Load : 35 lbs. Platform Ht: 30 ft
Piranha P-3 Iron Worker; 50-Ton; 13" Flat Shear; 5" Angle Shear; 11" x 17" Die Station; Notching Station; Assortment of Punch & Die Buttons
Bridgeport; Series I Vertical Milling Machine; 2-HP; 9" x 42" Table; Variable Speed Spindle; 6" Machinist Vise
Pines; #2 Hydraulic Tube Bender; 3" Dia. X 156" Capacity; Clamp Die; Pressure Die; Bend Die; Hydraulic Mandrel Extract; Assorted Dies, Operator Station
Omax/Flow; 2652 Water; 4" Max. Omax Controller; Solids Removal System; Abrasive Tank; Filtration System; Abrasive Delivery System; 500# Capacity, Catalogs, Manuals and software
Caterpillar; V50D Fork Lift Truck; 4750# Lift Capacity; 3-Stage Mast; 48" Forks; 188" Max. Lift; Solid Tires; Side Shifter; LP Gas
Pines; 101-10A-51 Hydraulic Tube Bender; 1.5 Dia. X 132" Capacity; Pressure Die; Bend Die; Hydraulic Mandrel Extract; Assorted Dies
Piranha; P-90 Iron Worker; Flat, Shear, Angle, Notch, well tooled
2004 Brown & Sharpe, Gage 2000 Cordinate Measuring Machine
Zero Zone model 4RVZC30 230 volt single phase retail food display freezer unit
Zero Zone model 4RVZC30 230 volt single phase retail food display freezer
Hobart model AWS-1LR 240 volt single phase meat wrapper and labeler unit
Hobart model MG2032 208 volt 3 phase meat grinder
Leroi 185 Towable Air Compressor, 4 Cylinder John Deere Diesel, 185 Cfm
Ingersoll Rand 125 Gyro-flo Towable Air Compressor, 125 Cfm, Gas Engine
Condor Model 68 Man Lift, Manufacture Date 3-18-85, Platform Height 744", 60' High, Gas or Propane V-4 Engine
Harbil commercial paint shaker model 28719, 120 volt, handles 5 and 1-gallon containers, in like new condition, manuals and accessories are included
Hobart model HLXWM-2 120 volt single phase electronic scale
Wayne 8" Gas Powered Chipper, 3/8 8 cycle Gas, single axle.
Caterpillar Model GP40 Fork Truck, Gas Powered, 8000 lb. Capacity, 187" Lift, Front Solid Tires, Pneumatic Rears, 51" Forks, with Side Shift, 5813 Metered Hours
Clark Yard Truck/Forklift, Model #C500-Y50, LP with Tank, 2-Stage Mast, 4650 lb. Capacity, 1962 Metered Hours
Sellick SD-80 Off-Road Forklift, 180" Lift, 8000# Capacity, 4-Cylinder Diesel Engine, 3-Stage, 4-Speed Transmission Shift on the Go, Lift/Tilt/Side Shift, engine cover has scattered dents
Connectra model 28 EP 2? thru 8?electric powered HDPE butt fusion machine. Includes 8? DIPS X 6? IPS upper and lower inserts. Missing Heater and Facer. Machine is in excellent condition
SkyJack model SJ III 4626 aerial lift. Deck height 26?, working height 32?, deck retracted 86?, deck extended 120?, height 88?, fold down railings for 71? of height, width 46?, non marring tires, 850
Grove model SM2633 aerial lift ?Nugget Series?. Deck height 20?, working height 26?, deck retracted 96?, deck extended 128?, height 87?, width 33?, railings removable, 24 volt system with onboard char
White Farm Off-Road Hi Lo/Fork Lift, Model 263-71719, 2WD, 6-Cylinder Gas Engine, 2-Stage Mast, Manual Transmission, 3260 Metered Hours
Tennant model 7200, 36 volt rechargeable ride on commercial floor cleaner, batteries included also includes (1) Tennant 36 volt battery charger
Hobart model 6801 200-230 volt 3 phase commercial meat band saw
Phase technologies model PT3110 digital phase converter system, sinusoidal 3 -phase output voltages balanced to within 1% under all load conditions with siemens 3-phase electrical box & brakers. Unit
DoAll Model C-70 horizontal automatic band saw, 1" blade, 13" dia. Cutting capacity, auto/manual cycle, coolant system, 24" feed index, with 6' roller section
Fadal model VH65T dual chuck 4th axis unit. 6 1/2" face plate, 12.9" clearance, 1.37" hole through, 180lb., capacity, 360 degree rotation
Fadal Model 906-1, VMC 4020 vertical machining center, 21 station A + C, 20" X 40" t-slot table with mounting plate (no vises) 40" = X, 20" =Y, 20" = Z. Travels 10,000 RPM spindle, Fadal CNC 88 HS con
Tree model 1060/24 V CNC Vertical Machining Center, 24? x 48? T-Slot Table, with mounting plate, X=40?, Y=24?, xZ=24? travels, 24 position tool changer, CAT 40 Taper, 8,000 RPM Spindle, Chip Pan, Dyna
Mazak Model V-12, 20" X 48" t-slot table X=40", Y=20", Z=20" travels, 20 position tool changer, cat 50 taper, 3000 rpm spindle, fanuc 6M-B control connected to a PC with suburban machinery PC/DNC edit
Hyster Forklift Model S80XL2, 7200 lb. Capacity, LP, Side Shift, 3-Stage, 4623 Metered Hours
Lincoln Arc Welder, Towable, SA200DC, Pipeliner Special, Continental Gas 4-Cylinder Engine, Takes 2" Ball, 50' Reg. and 100' Pos Leads, New 14" Tires
2002 UpRight 20' Scissors Lift, Hard Tires, Extendable Platform, 456 Metered Hours, Model 66000 020, 4578 GVW, 24-Volt, with Built in Charger, Built In Platform Power
Clark Pneumatic Tire Hilo Forklift, Gasoline motor, model C-500 HY-45
Hough H-80 Articulating Wheel Loader, 3-Forward & 3-Reverse Speeds, No Hour Meter, 23.5-25 Tires, International Inline 6-Cylinder Engine, 8'10" Bucket, Full Cab with no broken glass, Runs & Operates,
1998 Bobcat 773; Kubota Diesel V2203-E 4-Cylinder Engine, 2243 Hours, Diesel Powered, Hydrostat Drive, 4x4, 2 Hydraulic Outlets on the Front, 73? Bucket Size, 55% Tire Tread, Freshly Painted. The tail
EXCEL 1500 Self-Contained Portable Closed-Circuit Impact Crusher; 1990, 3406 Caterpillar Engine, 400HP
1996 Camel sewer and catch basin cleaner,Chevrolet Kodiak chassis, 60,936 miles, 7502 hours.
1995 Tymco 210 regenerative air sweeper, GMC/ Isuzu chassis, 167310 miles, 4 cylinder Isuzu diesel engine, auto transmission, AM/FM cassette, air condition, Kubota 4 cylinder diesel auxiliary motor 94
Toyota model 7FGU20 type LP propane sit down fork lift with side shifter with a maximum load capacity of approx 3900# (Working condition unknown, could not test), hours approx 1680.0,
Raymond model DSX40 approx 3750# capacity 24 volt rechargeable walky stacker hours on unit 499.5, key included, unit raises and lowers but does not motivate
Crown model RC3020-30, 36 volt rechargeable stand on fork lift with max lift capacity of 2750 lbs, max vertical lift of 190", fork dimensions 4" width x 42" length, shows 4121 hours on meter
Crown model RC3020-30, 36 volt rechargeable stand on fork lift with max lift capacity of 2750 lbs, max vertical lift of 190", fork dimensions 4" width x 42" length, shows 7217 hours on meter
Komatsu model FG20C-11, propane powered fork lift max lift capacity of 4000 lbs, max vertical lift of 128", fork dimensions 4" width x 37" length
Yale model GLP040AFNUAF084, propane powered fork lift max lift capacity of 4000 lbs, max vertical lift of 128.7", fork dimensions 4" width x 42" length
Yale model GLP040AFNUAF084, propane powered fork lift max lift capacity of 4000 lbs, max vertical lift of 129", fork dimensions 4" width x 40" length
Yale model GLP040AFNUAF084, propane powered fork lift max lift capacity of 4000 lbs, max vertical lift of 129", fork dimensions 4" width x 40" length
Rebuilt1999 Whitney model BL RE70 Beam Line for channel, plate and beam shapes with (5) 100 ton punches, SN 98-47, Handles W8x10x3/16 thru W24x55x1/2.
Taylor Lift Truck 17,000 lb. Lift Truck Model #Gt17, fork side shift with 7 foot long forks, Well maintained and used daily.
Caterpillar Propane Forklift (propane tank included) model #GC15K, 2,000 pound lift capacity ,42 inch forks, side shift ,188 inch maximum lift height, 83 inch lowered height, 8,877 meter hours, 6,350
Caterpillar Propane Forklift (propane tank not included) model #T50E, 42" forks, side shift , 188" maximum lift height , 83" lowered height, 5,000 pound capacity , 11,561 meter hours - weighs 8,460 po
Clark Electric Forklift model #ECS30, 36v battery included, 60 inch forks, side shift ,185 inch maximum lift height, 3,000 lb. capacity, 3,446 meter hours, 11,575 total weight including battery. Runs
Generac power system with OHVI engine. 1.0 liter natural gas generator which takes 30 seconds to turn on after power loss. Runs on natural gas/LP - (24Wx47Dx28H) New in December of 2005 and used very
1996 International model 4800 Boom Truck with factory 4x4 push button, powered by International D466 210hp diesel engine , 6 speed transmission. Well maintained unit with 144,067 miles and 2,014 hours
Rebuilt1999 Whitney model BL RE70 Beam Line for channel, plate and beam shapes with (5) 100 ton punches, Handles W8x10x3/16 thru W24x55x1/2.
1991 Pettibone model B-68 all terrain forklift, 4 cylinder turbo Cummings, 4x4, 36 ft. reach, fork length 48 inch , 8,000 lb capacity, tires 70%. 6,188 metered hours. Fully operational
2000 SkyTrak Model #10054L , 4 cylinder diesel engine , 4WD off road forklift in good running condition. With approx. 50 ft. long max boom extension , 4 inch x 48 inch forks and only 3,429 Metered hou
Yale Air Tire Forklift, Model#G51P050CAS074, 5,000lb Capacity, LP, No Brakes, Lifts 130", 2262 Metered Hours
Clark Air Tire Forklift, Model #C500-Y100, 10,000lb Capacity, LP, 8257 Metered Hours
Hyster Forklift Model #S60XL, 6,000lb Capacity, LP, 8669 Metered Hours
SkyJack 4626 Scissors Lift, controls are broken, condition unknown - will need repairs
SkyJack 4626 Scissors Lift, needs repairs, the controller is broken
1999 Sky Trak 8042, 8,000 lb. Capacity, 42' Reach, Full Cab, 4980 Metered Hours
Komatsu propane powered fork lift model FG20C11, 4000 lb capacity, (working condition unknown, unable to test) in used condition has rust and scratches, shows 6970 hours on meter, seat is ripped
Nissan propane powered fork lift model PJ02A60PV, 4000 lb capacity in used condition has several scratches and rust visible (working condition unknown, unable to test) hours on meter unknown.
Daewoo propane powered fork lift model G20E-3, 4000 lb capacity in used condition has few scratches and rust visible (working condition unknown, unable to test) has 4828 hours on meter
Yale propane powered fork lift model GLP040ASNUAF084, 4000 lb capacity, in used condition has some scratches and rust (working condition unknown, unable to test) hours unknown.
Liebert model UBP180, 288-423 VDC uninterruptable power system, cabinet DIMS: 57" width x 72" height x 28 1/4" depth, cabinet weight 1350 #'s
Aisle-Master model 219 AM, 24 volt electric scissor lift (19' 6" max. height) 1000 # max. capacity
Hyster model E50XM-27, 36 volt, 3400 # max. capacity electric fork lift with side shift attachment, 4" x 48" forks, solid rubber tires, 265.50" max. lift height, (NO battery, hours unknown, digital me
Hyster model E50XM-27, 36 volt, 3400 # max. capacity electric fork lift with side shift attachment, 4" x 48" forks, solid rubber tires, 265.50" max. lift height, (NO battery, hours unknown, digital me
Hyster model E50XM-27, 36 volt, 3400 # max. capacity electric fork lift with side shift attachment, 4" x 48" forks, solid rubber tires, 265.50" max. lift height, (NO battery, hours unknown, digital me
Hyster model E50XM-27, 36 volt, 3400 # max. capacity electric fork lift with side shift attachment, 4" x 48" forks, solid rubber tires, 265.50" max. lift height, (NO battery, hours unknown, digital me
Hyster model E50XM-27, 36 volt, 3400 # capacity electric fork lift with side shift attachment, 4" x 42" forks, solid rubber tires, 265" max. lift height, 642 hours on digital meter, Refurbished batter
Ellis model 1600 portable horizontal band saw with a 10' x 1" x .035" blade, 7" to 10" round bar capacity, 11" flat bar capacity, 115 volt, 1 Ph, 1 Hp, 1725 RPM motor, approx. 12" width cut area and 4
Toyota model 71-GCU15, 2500 # capacity propane powered fork lift with 189" max. lift, side shift attachment, 4" x 42" forks, 6283 hours on meter, non-marking solid rubber tires
Multiquip Model TT12D 4000 Watt Light Tower with Large Fuel Cell, Powered by a Duetz Diesel Engine
Sullar 20-100H Rotary screw 100hp air compressor, 480 volt, 3 phase, direct gear driven, electro- mechanical controls, heat exchangers, air/fluid separation system, new air-en installed at 50,000 hour
Sullar 20-100H Rotary screw 100hp air compressor, 480 volt, 3 phase, direct gear driven, electro- mechanical controls, heat exchangers, air/fluid separation system, new air-en installed at 50,000 hour
Ex-Cello-O Model 605 CNC Milling Center, Dynapath 3-Axis CNC Control, 240 Volt, 3-Phase, Table Size 47" x 11", Travels X-Axis 30", Y-Axis 15", Z-Axis 5"
Miller Bobcat 225G CC/CV AC/DC Welder, 8000 Watt Generator with Leads
Hyster Forklift Model S80XL2, 7200lb Capacity, LP, Side Shift, 3-Stage, 4623 Metered Hours
TCM Forklift Model FCG25-2H, 3500lb Capacity, 3-Stage, Side Shift, LP, 6180 Metered Hours
Aronson Model D-10 Welding Positioner, 1000lbs Capacity, 480volt, 3-Phase, Manufacturer Date of 3-5-1957
1990 Lull 644 Highlander II; Diesel Powered, Power Shift, 3-Speed Drive, JD Diesel 4-Cylinder, 35? Lift Height, 6000lb Capacity, 3457 Hours, 48?L x 2?W Fork Length, 60% Tire Tread, Tire Size-13:00-24,
Stoelting model F131-38G 230 volt single phase retail frozen beverage dispenser
Garland model MASTER200 200/240 volt commercial oven at approx 38" width x 58 1/2" height x 40" depth
Tomcat model 350 24 volt rechargeable electronic sit down floor cleaner
Toyota model 7FGU25 propane powered fork lift with 139" max. lift height, 4" x 48" forks, solid rubber tires (appear to need replaced), side shift attachment, (hours unknown, running condition unknown
Heli Forklift, Model #CPYD25, 5,000 lb. Capacity, 3-Stage Mast, Lifts 185", with Side Shift, Year 2006, 396 Hours
MEC 2548HT Scissors Lift, Runs and Drives, 25' Reach Height, 36 Volt, Built-In Charger, 1315 Hours, Built-In Fork Pockets, may need some brake work
Lincoln Ranger 10000 Welder/Generator, Kohler 20hp Gas Engine, Electric Start, 120, 240-V Generator, 10,000 Peak, 9000 Continuous, 0059 Metered Hours, AC/DC.
Clark Pneumatic HiLo with Clamp Rotator Assembly, 4500 lbs Capacity, LP Gas, Model # C50045, 2948 Metered Hours, 2-Stage Mast, No Tank
John Deere 480C Forklift, 3-Stage Mast, 4,000lb Capacity, 24' Height, 16.9-24 Tires, Hour Meter is Broken, Approx 2,000hrs, 4cyl Diesel Engine
Ariel JGJ-4 Natural Gas Compressor (Rated & 1240 HP) R&R Cooler Model #RU184.12R, with air cooled heat exchanger, with aluminum adjustable vents, P/B Reliance 600HP Electric Motor, Dual Ariel Compress
Ariel JGJ-4 Compressor (Rated & 1240 HP) P/B Reliance 600HP Electric Motor S/N 28BG50127, R & R Cooler. New Omron Drive Control
Ariel JGE-4 Compressor (Rated & 2140HP) P/B Reliance 600 HP electric motor, R & R Cooler. Omron drive controller
Kobelco Natural Gas Compressor Model #19L with Baldor 150HP Motor # C0804090010 Motor Not Installed, R&R Cooler Model #R54.8L, With air cooled heat exchanger with aluminum adjustable vents, 3 Northern
Kobelco Natural Gas Compressor Model #19L with Baldor 150HP Motor # C0504155070, R&R Cooler Model # R54.8L, With air cooled heat exchanger with aluminum adjustable vents, 3 Northern Design pressure t
Kobelco Natural Gas Compressor, with Baldor 150HP Motor # C0710180160, R&R Cooler Model # R54.8L, with air cooled heat exchanger with aluminum adjustable vents, 3 Northern Design pressure tanks (Manuf
Kobelco Natural Gas Compressor Model #19L, with Baldor 150HP Motor # C0509125140, R&R Cooler Model # R54.8L, 3 Northern Design pressure tanks (Manufactured 2004) MAWP 225, Murphy electronics with Suct
Kobelco Natural Gas Compressor Model #19L, with Baldor 150HP Motor # C0504155070 Motor Not Installed, R&R Cooler Model # R54.8L, With air cooled heat exchanger with aluminum adjustable vents, 3 Northe
Kobelco Natural Gas Compressor Model #19L, with Baldor 150HP Motor # C0410225060, R&R Cooler Model # R54.8L, 3 Northern Design pressure tanks (Manufactured 2005) MAWP 225, Murphy electronics with Suct
Kobelco Natural Gas Compressor Model #19L, with Baldor 150HP Motor # C0804090015, R&R Cooler Model # R54.8L, With air cooled heat exchanger with aluminum adjustable vents, 3 Northern Design pressure t
Kobelco Natural Gas Compressor Model #19L with Baldor 150HP Motor # C0712040040,R&R Cooler Model # R54.8L With air cooled heat exchanger with aluminum adjustable vents, 3 Northern Design pressure tank
3,000lbs Pneumatic tire Clark Lift Truck Model C500Y.30 Type G Runs good, has newer drive tires, lifts 187", weak battery.
Caterpillar Model GP40 Fork Truck, Gas Powered, 8000 lb. Capacity, 187" Lift, Front Solid Tires, Pneumatic Rears, 51" Forks, with Side Shift, 5813 Metered Hours
2002 UpRight 20' Scissors Lift, Hard Tires, Extendable Platform, 456 Metered Hours, Model 66000 020, 4578 GVW, 24-Volt, with Built in Charger, Built In Platform Power
New Alpha Series 23AD Indexing Rotary Drive System; 110 Volt, Single Phase. Model: 23AD-04277R-SR3VW1. Also Included is a Delta Driver VFD-S plus the Operation and Maintenance Manual. This is a four s
Skyjack SJIII 4626 Scissors Lift, 26' Height Cap, 350lbs Capacity, 24volt
Skyjack SJIII 4626 Scissors Lift, 26' Height Cap, 350lbs Capacity, 24volt
2007 Heli Forklift Model #CPYD25, 5000lb Capacity with Side Shift, 3-Stage Mast - Lifts 185", 162 Metered Hours
Ingersoll Rand air compressor, model 2545, 230/460 volt, 3 - phase, 120 gallon tank, with reading tchnologies cooling unit, and thermal transfer heat exchanger, model; AA-100-1
CROWN Fork Lift with Charger, Stand-Up Model: 125P-13, lift capacity 2350 lb, hour meter reads 8686, 36 volt, 42" forks, 3 - stage mast, hard rubber tires. Charger is GNB 36 volt, FER CHARGER 100, 240
Signode SP710 Strapping Machine; 220 Volt, 3 Phase. It will handle boxes to 3? square and it comes with 16 rolls of ?? strapping and an operation manual.
Miller welder, syncrowave 250DX, with mask and accessories, 230 volt, 3-phase
Pettibone model B-66-C, diesel powered, 4X4, Hi-Lo speed gear drive, Cummins 4 cylinder, lift height 35?, capacity 6,000, hours 1880, fork length 48?, tires 60% tread left, has minor rust and scratche
1986 Lull model 644TThighlander II, diesel powered, 4X4, 3 speed gear drive, motor John Deere diesel, lift height 34?, capacity 6000lb, fork length 42?, tires approximate 60% tread left, runs, 4 wheel
2001 Gradall 534D-6 Tele Handler All Terrain Hi-Lo, Cummins Diesel Engine, the Hour Meter Reads 3,193, Forks are 48", Rear Wheel Steer, 2-Wheel Drive and 4x4 Drive
1999 Case 95XT Skid Steer, 3204 Metered Hours, 90 HP Case Cummins Engine, New Manual Bucket Coupler, 80" Bucket, 3200 lb. Lift, Auxiliary Hydraulics, Block Heater
2004 Case 60XT Skid Steer, No Bucket, 2431 Metered Hours, 70 HP Case Cummins Engine, Block Heater, Hydraulic Coupler, Auxiliary Hydraulics
Genie Lift - Model# AWP30S. Max Load: 351lbs. Platform Height: 30ft. Un-Tested
Yale - Hi-Lo. Model# ERC100HGN36TV108. Max Capacity 16000LBS. Hours-9456. Truck Weight w/ Battery:16900LBS. Battery Type:E.36 Volts.
Yale 12,000 LB Lift Truck; Model #: GP-120-SBT-093 Dual Drive Tires; 171" Max Lift Capacity; Enclosed Cab; Windshield Wipers; Propane; 60" x 8" Forks; 2,000 Approximate Hours. Transmission does not wo
Yale Electric Lift Truck; Model #: ERC100HBN36SE075; 36V; Max Capacity: 8,800 LB; Side Shift Fork Positioner; Dual Drive Tires; 146" Max; 59" x 6" Forks; 2,060 Hours. Will not move Forward or Reverse.
Cat All Lift Tow Motor; Model #: LT90FM; Truck Runs & Operates. No Forks. Propane
Clark Propane Lift Truck. Dual Drive Tires; Model #: C500Y100; Max Capacity: 10,000 LB; Lift Capacity: 114"; Forks 54" x 6"; Spread: 20"; 8,257 Hours. Has a Timing Chain Issue.
Komatsu gas (propane) hi-lo fork lift, model #FG20ST-4, 4480lb capacity, 188" lift height, 24" tilt lift, 24" side shift capacity, side shift not working, runs and drives great
Factory Cat model GTX 36 volt rechargeable riding floor scrubber, meter shows 1,667 hours, batteries and key included, appears to be in fair condition, front wheel is damaged
Lantech model Q Series, 120 volt, 1-phase automated stretch wrapping system with adjustable turn table and roll carriage speeds
Twistair model TA-30TAS2C, 125 PSI screw type air compressor (wired 440 volt, 3 Ph) with approx. 100 gal. air tank and Kaeser model TC31 air dryer
Peddinghaus Corp. Peddiline model 600/3 beam line drill needs servo motor replaced, in non running condition.
Peddinghaus Corp. industrial horizontal band saw with 36" width x approx. 36" height cut surface, heavy duty rollers, hydraulic controls and approx. 2" blade.
Behringer HBP 530/1104G industrial horizontal band saw with 60" width x approx. 45" height cutting surface, heavy duty rollers, adjustable angle up to 45 degrees. Includes control panel, base, chip tr
Raymond model 021I4D-R40TT, 36 volt, 4000 # max. capacity electric stand up fork lift with a 211" max. lift height, 4" x 42" forks, side shift, 50" carriage, 814 hours on meter, (in working condition)
SkyTrak Model 10054 4WD off road Forklift, (10,000 lb. capacity) in good running condition, with an approx 50 ft. long max boom extension, outriggers, cab heat, 4" x 48" forks, and cab heat, 9461 hour
Marathon, model 40 CC 02, Commercial Compactor.Date Installed 1/21/2002- working., includes the shoot, dog house, compactor and yard container. ( control board NOT included )
Cram A Lot, model CCR-02-WM, Commercial Compactor Installed 12/1/1999 - working, includes the shoot, dog house, compactor and yard container. ( control board NOT included )
Cram A Lot, model CO - 02, Commercial CompactorInstalled 2/3/1994- working. includes the shoot, dog house, compactor and yard container. ( control board NOT included )
Cram A Lot, model SCT-T2-30, Commercial Compactor. Date Installed 7/8/2000 - working. includes the shoot, dog house, compactor and yard container. ( control board NOT included )
Cram A Lot, model CCR 02 WM, Commercial Compactor. Date Installed 8/6/02 - working. includes the shoot, dog house, compactor and yard container. ( control board NOT included )
Cram A Lot, model CCR - 02, Commercial Compactor. Date Installed 4/17/2000 - working. Date of MFG - 3/2000 includes the shoot, dog house, compactor and yard container.
Cram A Lot, model CC 02 WM, Commercial Compactor. Date Installed 1/4/1996 - working. includes the shoot, dog house, compactor and yard container.
Cram A Lot, model SCR-T2-30, Commercial Compactor. Date Installed 9/20/1999 - working.
Yale model #GLP040AFNUAF084, approx. 4000 cap. Propane powered forklift
Daewoo propane powered fork lift model G20E-3, 4000 lb capacity in used condition has some scratches and rust, 3,913 hours on meter.
Yale fork lift model GLP040AFNUAF084, propane lift, 4000 lb capacity (working condition unknown, unable to test) in used condition has several scratches and some rust
Toyota propane powered fork lift model 7FGU25, 3600 lb capacity
Yale model GLP040AFNUAF084 4000# capacity propane powered lift truck
1996 International Boom Truck, Model 4700 DT466, International 466 HP Motor, 139,920 Odometer Hours, 15,066 Metered Hours, Manual 5-Speed Transmission
Winco Generator, Trailer Mounted, 2" Ball, Model#25PT0C-3/G, Made in the USA, 25000 Watts, 120/240volts, 104.2 Amps, 60 Cycle Single Phase, Approx. 40 Hours of use since new, with Extension Cord, Test
1996 JLG Lift, Model 40, Electric, 40', 500 lb. Capacity, 48 Volt, 2060 Metered Hours
Clark Forklift Model GPS25MB, 4625 lb. Capacity, 2-Stage, Side Shift, LP, weak batteries, has bad rear wheel bearing
2003 Carolina High Pressure Water Blaster, Ultra Boss Pressure Water Blaster, Model E75, 1292 Metered Hours
Onan 30KW Generator, Model 30.0EK15R106460,120/208 Volts, 526.6 Metered Hours, Powered by Ford Inline 6-Cylinder, Set up to Run Off Natural Gas, comes with Control Box
Ingersoll Rand 100/47 Tow Style Air Compressor, 4-Cylinder Gas Engine, 2" Hitch, 2296 Metered Hours, Front Air Controls with Air Hose
Metal Pro Power Tube Bender 9000 with Assortment of Dies, Single Phase
Acer Grinder, Magnetic Chuck 6x18, Model #AGS618, 1993, 8" Wheel, 230V
Cincinnati 3'x7" Radial Arm Drill, 3-Phase
Emco PC 55 CNC Mill, 16"x5" Table, Depth 7" with Vice on Table with Computer
Emco PC 55 CNC Mill, 16"x5" Table, Depth 7" with Vice on Table with Computer
Emco PC 55 CNC Mill, 16"x5" Table, Depth 7" with Vice on Table with Computer
Emco PC Turn 55 CNC Lathe, 12x5 with Fanuc Control on Table with Computer
Emco PC Turn 55 CNC Lathe with Fanuc Control, 5"x12" on Table, with Computer
Emco PC Turn 55 CNC Lathe, 12"x5" with Fanuc Control on Table with Computer
Emco PC Turn 120 CNC Lathe, Floor Model 6E Fanuc, Series O Control, with Power Tailstock and 8 Position Turret
Hurco KM3P Vertical Mill, 38"x10" Table, 3 Axis CNC, Altimax control, 3-Phase
HURCO Model KM3 3 Axis CNC Mill, Table Size 42"x12" Altimax Control, 3-Phase
Bridgeport Series I Vertical Mill 9"x42" Table, 1 1/2 HP, Acu-Rite 2 Axis DRO, 3-Phase
Bridgeport Series I Vertical Mill 9"x42" Table, 2 HP, 3-Phase
Hurco Mill, 48"x12" Table, 3 Phase, 240-480V Variable Speed
Bridgeport Series I Vertical Mill, 9"x42" Table, 2 Axis DRO, 2 HP, 3-Phase
Bridgeport Series I Vertical Mill, 2 Hp, 9"x42" Table, DRO for X & Y, 3-Phase
Acer Ultima 3V Mill, 50"x110" Table, Newal DRO, 3-Phase
Braun model 2000H-SH, 208 volt, 3 Ph, 600 # capacity, 3, 000, 000 BTU, 125 PSI steam dryer (55.7 boiler HP REQ) (MFG. 1993)
Challenge model CFG-I2, 500, 000 BTU/HR natural gas/480 volt industrial dryer (400 # max. capacity), basket DIMS: 66" x 69"
Braun model 600NEUT. TSL, 480 volt, 3 Ph, 60 cycle, 26.3 RPM (wash), 277/554 RPM (extract, counter clockwise), 650/295 # capacity washer-extractor
Braun model NMTS, 240 volt, 3 Ph, 60 cycle, 31.7 RPM (wash), 554 RPM (extract, counter clockwise), 400 # capacity washer-extracto
Lagun FTV-2S Vertical Mill with Acu-Rite 2-Axis D.R.O.
Onan Generator with Onan L634 Diesel Engine Model #50.0DL6B, Service Rating Standby, 250 Work Hours, New Battery, Hertz60, RPM 3600, Single Phase, 50-KVA50, 3-Phase 50-KVA 62.5, Amps 174/208, Enclosed
JLG Scissors Lift Model 1932-E, 19' Height, 24 Volt
Grove Nugget Series Scissors Lift, Model SM2633E, 20' Height, 24 Volt
Grove Scissors Lift, Model SM2232E, 16' Height, 24 Volt
MEC Scissors Lift, Model 220TMII, 19' Height, 24 Volt
1996 Sky Trak 6036, 4766 Metered Hours, Cummins 4-Cylinder Diesel Motor, has Newer Battery and Starter, 48" Forks, (3) Forward Gears, (3) Reverse Gears, 5' Fork Mast
Tom Cat model 350, 24 volt rechargeable riding floor scrubber, batteries included
Tom Cat model 350, 24 volt, rechargeable riding floor scrubber batteries NOT included
Tom Cat model 350, 24 volt, rechargeable riding floor scrubber batteries NOT included
True model T-72F 115/230 volt commercial refrigerator at approx 78" width x 84" height x 30" depth (Working condition unknown, could not test), unit appears to be in fair condition
Ingersoll Rand model 100/47 tow behind air compressor with a 4 cylinder gas engine, 2" hitch, front mounted air controls, 2296 hours on meter and approx. 50' of air hose
Toyota Forklift, Model 42-4FG25, 2855 Metered Hours, 5,000 lb. Capacity, All New Pneumatic Tires, New Paint and Seat, Triple Mast 84/185, 48" Forks, LP, Sells with Tank
Genie 145/22 Boom Lift, 4WD, Propane or Gas Powered, 2921 Hours, Ford 4-Cylinder Motor, Model LRG-425I-6007-2, Motor
Clark 6000lbs Model C500560 Hi Lo, 130" Lift, 2-Stage Mast, Solid Tires, Propane, 48" Forks, 5,668 Metered Hours
CAT Forklift, Model#GP35, 7,000lb Capacity, With All New Air Tires, Lifts 187" - 3 Stage, Side Shift, 44" Forks, LP, 5381 Metered Hours
Hyster Forklift, Model#H50XL, 5,000lb Capacity, With All New Air Tires, Lifts 169" - 3 Stage, 48" Forks, LP, 394 Metered Hours
Mitsubishi Forklift, Model#FG25, 5,000lb Capacity, With All New Air Tires, Side Shift, 60" Forks, LP, 4007 Metered Hours
Sky Trak Model 8038, 4144 Metered Hours, Auto Trans, John Deere Turbo Diesel Motor, the left rear tire looses air, appears to leak hydraulic fluid from the boom interior, has problems articulating
1997 Hyster H360 XL, Has Rebuilt Motor Including Pistons, Sleeves and Rings and Turbo Charger at 7734 metered hours, Perkins Diesel Motor, Pneumatic Tires - (3) are newer, 8' Long Forks, 36,000lb Capa
JLG Manlift, 45HA 2X4, Gas or LP (No Tank), Motor has approx. 5,000 Hours, 500 lb. Capacity, 45' Reach, recently changed hydraulic oil and filters, one of the lifting cylinders said to not work (middl
Smith Quality Air Compresser Kubota diesel engine, 1505/E, Model 100DP, manufacture date is 07/98, max RPM 2350, CFM 100, max pressure is 125, Smith Ridge Runner, Pinto style hitch, tires are approx.
Hobart model 6614 230 volt 3 phase meat saw
Lift King model LK 8M22 diesel powered fork lift with 8000 # max. capacity, 14' max. lift height, 24" load center, 14,000 # vehicle weight, 48" front tires, 30" back tires, 5" x 59" forks, 3900 hours
Genie model Z-45/22 gas/propane powered boom lift with 500 # rated work load, 45' platform height, 30" x 72" platform
Lincoln model RANGER 10,000 Plus outdoor tig welding power supply with 225 AC amp, 25 volt output, gas powered Kohler 23 Hp motor (MFG. 2008)
Marvel series 8 Mark II, 220/440 volt, 3 Ph Vertical Tilt Frame band saw with 18" max. width cutting capacity, 22" max. cut height, direct drive feed
Ficep Model A 152 CNC Angle/Punch/Shearing Line Year 2003, can be converted to flat bar channel or H-beam processing, currently set up for precessing, Max thickness: 15mm, max punch size:32mm, in 15m
Hyd-Mech model V-25, 220/440 volt, 3 Ph, steel band saw with 53" x 45" Table, 25 1/2" depth cutting capacity x 30" max. cut height, hydraulic locks and guide arm, 25 degree left and right tilt, 10 Hp
Geka model HYDRACROP 220-SD Ironworker, CNC Touch Screen Bar Feed System Angle bar cap:8"x8"x3/4", Flat Bar Cap:30"x3/4", Round Cap:2 3/8", Square Cap: 2 3/8", Punching: 1 1/2", Geka Semi Paxy Touch S
1 Fanuc Welding Robot Model S5, Includes Controls Rotary Table and Lincoln CV-400 Power Source
Ridgid model 369-12, 115 volt, threader (1/8" to 2" pipe and 1/4" to 2" bolt) Includes various dies, hardened bolts and custom fabricated steel stand
Nelson model 6000, 220/440 volt, 3 Ph, stud welder with hose and (2) guns. (work shop) 1" Capacity
HE&M Horizontal Saw Mdl 1500LA 1 1/2" blade, 25 x 25" cutting capacity with Automatic bar feed and out feed conveyor
Cincinnati Century Hydraulic 10' x 1/4" Shear, Model 2H10, Equipped with front operated power back guage
CAT Forklift, model #GC25K, 5,000 capacity, 3 stage mast with side shift, 48? forks, 3292 hours with tank
Yale forklift, model #GLP040AFNUAF084, 4,000 lb, capacity, 3 stage mast with side shift, 42? forks, 5941 hours with tank
Clark Forklift Model GPS25MB, 4625 lb. Capacity, 2-Stage, Side Shift, LP, weak batteries
Sullivan Industries Towable Air Compressor, 210 CFM, Max Speed 2500rpm, 1084 Metered Hours, John Deere Diesel Engine
JLG Scissors Lift, Model CM2033, 24volt, 20' Max Travel Height, 650lbs Capacity, has scattered rust/corrosion
Fairbanks-Morse Towable Generator, Pintle Hitch, LP, International Motor UV549 Model 93.8 KVA, 3-Phase, Transforms 480 3-Phase 112.5 KVA, Automatic Start, Can Run on Gasoline Also
1999 Upright MX-20 Scissors Lift, 127 Metered Hours, White Non-Marking Solid Tires, New Batteries, and Certification 5-09-10, 24volt, 30"W x 64" to 120" Platform
WILLIS Micro Cut ST1440 Engine lathe, 14" swing, 40" centers, 70 to 2000 rpm, inch and metric threading, 1-1/2" spindle bore,, sony digital readout, series # 7854, 5hp, 220 volt, 3-phase
1997 WILLIS Micro Cut 1050 vertical mill, 10" x 50" table, power X and Y, power draw bar, sony 3 - axes digital read out, 3 - hp motor
Enshu S300 Virtical machining center, Enac controls, 27-1/2" x 16" table, 19.7" x 15.7" x 11.8" XYZ travels, Kurt vise
DAEWOO Lynx 200 CNC lathe, fanuc 21T control, 8-1/2" Kitagawa 3 jaw chuck, turret, tail stock chip conveyor
Charmilles, ROBO FORM 100, electrical discharge machine, charmilles controls, 17 1/2" x 11" table, 220mm x 160mm x 220mm XYZ travels
1980s NTC , TMC-40V Vertical Machining center, fanuc control, 19" x 40" table, 40" x 20" x 25" XYZ travels, automatic tool changer
1990 NTC , TMC-40V Virtical Machining center, fanuc control, 19" x 40" table, 40" x 20" x 25" XYZ travels, automatic tool changer
1995 Monarch Predator CNC Lathe, fauc series 21-T control, 8-1/2" 3 jaw buck chuck, turret, tailstock, 200mm x 600mm, chip conveyor, 230 volt, 3 - phase
1998 Iemca, VIP70 CNC bar feeder, 56" long bars
Toyota model 42 6FGU25 forklift, 5,000 lb capacity, 595 original hours, 189? lift triple mast, 48? forks, side shift, dual fuel LPG/gas, tires 7:00-12 frts/6:00-9 rears. No leaks and runs out good. Dr
FPEC model HLD725, stainless steel Gondola dumper, hydraulic, self contained, cat walk and stairs.
JLG Industries, Inc. model 1932-E, 24 volt rechargeable scissor lift, max platform capacity of 500 lbs
JLG Industries, Inc. model 20DVSP, 24 volt rechargeable platform lift with max platform capacity of 400 lbs
Genie model GS-1930, 500 lb capacity scissor lift, shows 1,436 hours on meter
Komatsu model FG20C-12W type LP propane sit down forklift with a maximum load capacity of 4000# (Fair running condition) unit appears to have damage and in need of repair, hours approx 10913.7, key in
Nissan model PJ02A20PV approx 4000# capacity propane powered fork lift , key included, side shift not installed
Nissan model PJ02A20PV approx 4000# capacity propane powered fork lift keys are included, side shift not installed
Nissan propane fork lift, model KAPHC2A23PV, 4,000 lb capacity in used condition
Yale propane fork lift, model GLP040AFNUAF084
Daewoo propane fork lift, model G20E-3, 4,000 lb capacity (working condition unknown, unable to test) in fair condition, slight scratches,
Daewoo propane powered fork lift model 20E-3, (working condition unknown, unable to test) in used condition, has slight rust
1997 Ford F-350 Bucket Truck, 7.5L Gas Motor, 191,778 Odometer Miles, Model A28D, Auto Transmission, Telsta Boom, Pintle Hitch, missing radio, some chips and dings, ripped seat, front tires are worn
1994 GMC Topkick Boom Truck, 20' Bed, 60' Reach National Crane Series 556B on 1994 GMC Tandem, Catapillar Engine and Eaton Fuller 8-Speed Transmission with Hi-Lo. Air Brakes,Includes Pallet Forks, Spr
Nissan Forklift, Model CRGH02F30V, 6000lb Capacity, 130" Lift Height, 3-Stage Mast, 1012 Metered Hours, Sells with Propane Tank
Fanuc S420-W Robot with R-ST Controller System, Robot Controller Type A05B-2350-BOO4, 480 Volt, 3-Phase
Towable Pioneer 6" Water Pump, Model #PP66S12L11-F41914, 4-Cylinder Deutz Diesel, runs and pumps water, 7 hours on rebuilt engine
Heli Forklift, Model #CPYD25, 5,000 lb. Capacity, with Side Shift, Year 2007, 160 Metered Hours, LP, Sells with Tank, 3-Stage Mast, Solid Industrial Tires, 42" Forks
Miller Tig Welder: Dynasty 300 DX, water-cooled, 208, 220, or 460v, 1or 3PH, has manuals, extra tips, and gauges. Used one time, in like new condition.
1996 Bowie 1100-Gallon Gooseneck Hydro-Seeder, 4-Cylinder Diesel, Newer Clutch, Tandem Axle, Tower or Reel, 996 Metered Hours, Sand-Blasted and Re-Painted Interior
Case 200TX Directional Boring Machine, 4550 Metered Hours, 32-10' Rods, 3-Cylinder Diesel Motor, Rubber Ext. Tracks, (2) Stake Down Augers, Water Tank
Tomcat model 350 24 volt rechargeable electronic sit down floor scrubber (Working condition unknown, could not test), unit appears to be in fair condition and in need of repair, unsure if all parts a
Ingersoll Rand Model P50-PE 125 50HP rotarty screw air compressor.
Tos Model SUS 80 32"x 200" engine lathe. 32" 4 jaw chuck. Tailstock. Steady rest. 7-900 RPM
Polamco Model TUM-35 14" x 40" engine lathe. Taper attachment. IN/MM threading. 8" 4 -jaw chuck.
DoAll Model MDC-1212A Fully automatic horizontal bandsaw. Infeed/exit conveyor. Power clamping/stroking vises
2000 GMC Sierra 3500 HD Utility Truck, 6.5L Diesel Motor, 168,417 Odometer Miles, Auto Transmission
1989 Ford F700 Bucket Truck, 429 V-8 Motor, 085,677 Odometer Miles, Manual 10-Speed Transmission, 2-Door
RAFTER 14 STATION ROLL FORMER. 28 - 33" LONG, 1.5" DIAMETER SPINDLES, 11" SPINDLE SPAN-CENTER TO CENTER,, ELECTRIC VARIABLE SPEED & BRAKE, SUPPORTS INCLUDED. TISHKEN FLYING CUT OFF. 3HP MAIN MOTOR, JO
COLCHESTER TRIUMPH 2000 ENGINE LATHE. 15" SWING, 50" CENTERS, INCH & METRIC THREAD, 25-2000 SPINDLE RPM, 2" SPINDLE THROUGH HOLE, THREADING, 10" - 3JAW CHUCK, FOOT BREAK, MODEL# TRIUMPH 2000,
NIAGARA MECHANICAL SQUARING SHEAR. 16 GUAGE X 12' CAPACITY, 3HP DRIVE MOTOR, MODEL# 412. IN WORKING CONDITION.
NIAGARA M22 OBI PRESS. 2" STROKE, 22 TON, 8.75" SHUT HEIGHT, 2" ADJUSTMENT, 12" X 20" BED, 100-340SPM, AIR CLUTCH, PALM BUTTONS, MODEL# M22
NICCO HYDRAULIC SURFACE GRINDER. 12" X 24" ELECTROMAGNETIC CHUCK, POWER ELEVATION, WHEEL GUARD DRESSER, MODEL# NSG-6H
IRON BAY WELDING SYSTEM WITH LINCOLN SQUARE WAVE TIG 175 WELDER. SINGLE PHASE, 460V, 10/.125 CAPACITY, MODEL# MP-22
MINSTER 60 TON OBI PRESS. 6" STROKE, 6" ADJUSTMENT, 36" BED, LIGHT CURTAINS, PALM BUTTON CONTROLS, WINTRISS CLUTCH/BRAKE CONTROL, MODEL# 60-4-36
NACHI RED RING GEAR ROLLER. MODEL# RGB. DUEL DIE SYSTEM, AUTO PARTS LOADER.
DEVLIEG 3B JIG MILL. 3" SPINDLE, 36" X 60" T-SLOT TABLE, SONY 3 AXIS DIGITAL READ OUT, 48" VERTICAL TRAVEL, MODEL# 3B
DEVLIEG 3H-72 SPIRALMATIC JIG MILL. 3" SPINDLE, 35" X 72" T-SLOT TABLE, SONY 3 AXIS DIGITAL READ OUT, MODEL# 3H-72
NORTON (WARNER & SWASEY) PLAIN OD GRINDER. 20HP SPINDLE, 26" GRINDING WHEEL, WHEEL GUARD DRESSER, PICK FEED, TRUING, MODEL# LCTU
MINSTER 60 TON OBI PRESS. 22" X 56" BED, 6" STROKE, 8" ADJUSTMENTAIR CLUTCH, MODEL# 60-4.5-42
MINSTER 60 TON OBI PRESS. 22" X 56" BED, 6" STROKE, 8" ADJUSTMENTAIR CLUTCH, MODEL# 60-4.5-42
MINSTER 60 TON OBI PRESS. 22" X 56" BED, 6" STROKE, 8" ADJUSTMENTAIR CLUTCH, MODEL# 60-4.5-42
TISHKEN 16 STATION ROLL FORMER. 32 - 12" LONG, 1.5" DIAMETER SPINDLES, 8" SPINDLE SPAN-CENTER TO CENTER, MACHANICAL VARIABLE SPEED, SUPPORTS INCLUDED, MODEL# 16LW 1.5 LITTELL AUTOCENTERING REEL. 24" W
WARCO 75 TON STRAIGHT SIDE PRESS. 26" X 72" BED, 20" SHUT HEIGHT, 8" STROKE, 6" ADJUSTMENT, 45 SPM, AIR CLUTCH, 14" X 14" WINDOWS, MODEL# 75-2-72C,
HYSTER S155XL2. MAX LIFT CAPACITY 133", MAX WEIGHT CAPACITY 14250 LBS, TILT STEERING, 6 DEGREES BACK TILT, SIDE SHIFT, 71" FORKS, PROPANE, FRONT & REAR LIGHTS. 2001 YEAR.
HYSTER S50XM. MAX LIFT CAPACITY 189", MAX WEIGHT CAPACITY 4600 LBS, TILT STEERING, 5 DEGREE BACK TILT, SIDE SHIFT, 59" FORKS, PROPANE, FRONT & REAR LIGHTS. 2004 YEAR.
Coats rim clamp model 5060AX, (working condition unknown, unable to test)
Yale model ESC030G4T096, 3000 # capacity, 24 volt stand up fork lift with 231" max. lift height, 4" x 42" forks, 5 degree back tilt, 1841 hour on meter. Includes Yale model YR12-680, 24 volt battery c
Cram A Lot, Model SC-02-30, self contained Commercial Compactor. Mfg. Date 06/14/02. Unit is in working condition. includes the shoot, dog house, compactor and yard container. ( control board NOT incl
Cram A Lot, model CC 02 WM, Commercial Compactor. installed 12/15/1994?working. includes the shoot, dog house, compactor and 40' yard container. ( control board NOT included )
Cram A Lot, model CC-02 RB, Commercial Compactor. Date of Manufacturing 2/95 - working. includes the shoot, dog house, compactor and yard container. Control board not included
Cram A Lot, model SC 02 30, self contained Commercial Compactor. installed 5/20/02?working. includes the shoot, dog house, compactor and 20' yard container. Control boad not included
Heli Forklift Model# CPYD25, LP, 5,000lb Capacity, 3-Stage mast, Lifts 185", 42" Forks with Side Shift, 4-Cylinder, 3.0 GM Vortec Engine, Automatic, Air Tires, Year 2007, 324 Metered Hours
Toyota Forklift Model# 5FBC25, 5,000lb Capacity, 3-Stage Mast - Lifts 185", 42" Forks, Solid Tires, with Side Shift and Battery Charger, 6,621 Metered Hours
Crown Fork Lift Side Shifter, Model SU434504, 36V, No Charger, 3-Stage Mast, 9340 Metered Hours
Crown Fork Lift Side Shifter, Model SU434504, 36V, No Charger, 3-Stage Mast, 5569 Metered Hours
Crown Forklift Model R03020-40, 36V, No Charger, 3-Stage Mast, 5877 Metered Hours
Clark C500 Y60 Hi-Lo 8000lbs Capacity, LP, 2-Stage Mast, 147" Lift Height, 48" Forks, Dual Solid Front Tires, 8305 Metered Hours
Sky Trak Telescoping Boom Lift Model 8042, 4WD, 1994-Up, Cummins Diesel Motor, 9808 Metered Hours,
Genie 745/22 4x4 with 3955 Metered Hours, Gas or Propane Powered 4 cylinder Ford Motor
Braderson Carry Deck Crane Truck BMCRTR701B, Road Runner, 4-Cylinder John Deere Diesel Engine, 55' Reach, 4-Speed Trans, 03621 Odometer Miles, 4738 Metered Hours, has some broken glass, scattered pain
Manitou Off-Road Fork Lift Truck, Model T512TC Mfg. in 1985, 2-Stage Mast with 8' Forks, 3-Cylinder Diesel Engine, 2WD
Crown RC 3000 Electric Forklift, 2750 lb. Capacity 36 Volt, 5284 Metered Hours, lift height 208"
Crown RC 3000 Electric Forklift, 3700 lb. Capacity, 36 Volt, 9,115 Metered Hours, lift height 208"
Crown RC 3000 Electric Forklift, 2750 lb. Capacity, 36 Volt, 12,184 Metered Hours, lift height 208"
Chausse Hot Tack Coat/Seal Coat Tank Trailer, Tandem Axle, Pintle Hitch, believed to be approx. 900-Gallon, All Hydraulic/PTO, Cleaned Out, Newer Paint, was Stored Indoors
1989 Pettibone Model B66-C, 3.9L Cummins Engine, 35' Boom Height, Telescoping, 6,000lbs Capacity, Diesel Engine, 13.00-24TC Tires, has a few rips in the seat, showing some rust, 5698 Metered Hours, Ti
Sky Trak model 6036-2 turbo, year: 1997, 6000 # capacity, rough terrain, 3 section boom with 36'1" lift height and 22'3" reach, 4" x 46" forks, 2723 hours on meter (new meter installed with 267 hours)
2004 Mitsubishi FE640 Sweeper Truck, Mitsubishi 4 cyl. diesel engine, 79,378 miles
1995 Ford CF 7000 Elgin Sweeper Truck, Cummins diesel engine, 167,926 miles.
1993 International 4900 Bucket Truck, International diesel engine, 86,961 miles.
1997 GMC W4500 Sweeper Truck, Isuzu OHC diesel engine, 250,982 miles
2002 Sterling Vacuum Truck, Caterpillar 3406E diesel engine, 274185 miles
2002 Sterling SC8000 Sweeper Truck, Cummins 6 cylinder diesel engine,110,350 miles
1999 GMC T7500 Sweeper / Vacuum Truck Caterpllar 3126 diesel engine, 74770 miles,
2001 Sterling L7501 Tandem Axle Vacuum / Jet Truck. Caterpillar 3126B diesel engine, 24,693 miles
1999 GMC T-7500 Sweeper/Vacuum Truck, Caterpillar 3216 diesel engine, 112911 miles.
2002 GMC W4500 Sweeper Truck, Isuzu 4 cyl. diesel engine, 174,566 miles
2006 Sterling SC8000 Sweeper Truck ,Cummins diesel engine, 46041 miles
1994 Ford CL7000 Sweeper Truck , Cummins 6 cyl.diesel engine, 105,565 miles
2006 GMC W3500 Sweeper truck, Izuzu 5.2 diesel engine, 76,532 miles
2003 GMC W4500 Sweeper Truck, NON-RUNNING. Schwarze sweeper system model 3471 with 36" dia. broom mounted on left side, powered by Isuzu 2.4 litre diesel engine IN RUNNING CONDITION.
2007 GMC W4500 Sweeper Truck, Isuzu 5.2 litre diesel engine, 70,431 miles, 4630 hrs. on truck, 3373 hours on sweeper engine
1999 GMC T7500 Sweeper Truck, Caterpillar 3116 diesel engine, 24,574 miles, NON-RUNNING, Elgin Geovac series 4 sweeper, S/N Y0254D, Intelli Touch controller, dual 30" rotary broom with mid mounted vac
Hobart model UWS 240 volt single phase food wrapping and labeling machine unit has minor cosmetic damage
Terex 2366, Year is unknown. Diesel Powered, 6F-3R Speed Gear Drive. 6x6, 6 Cylinder Deutz Motor.
Yale model GLP040ATNUAF084, approx. 4000 lb. propane powered fork lift. reading 959.1 on meter. Lift is in NON-RUNNING condition.
Komatsu propane fork lift, model FE20012W, 4000 # capacity
Daewoo propane fork lift model G20E3, 4000 # capacity.
Daewoo model G20E-3, propane powered fork lift, max lift capacity 4,000 lbs., max vertical lift 127", 4,208 hours on meter, key included, tank and forks NOT included
Nissan model PJ02A0PV, propane powered fork lift max lift capacity/vertical lift capacity unknown, 5,711 hours on meter, key included, tank NOT included, fork dimensions are 4" width x 40" length
Bil-Jax model ESP 19 24 volt rechargeable stock picker, key not included, unit has minor cosmetic damage
2009 Genie S-40 Refurbished Boom Lift, with 26 Hours since Refurbished Ford Dual Fuel Engine. New Tires, New Controls, All Systems Updated to meet 2009 Specifications, Propane or Gas
Genie TMZ-34/19 Towable Boom Lift, Manufactured 2002, 500 lb. Capacity, 24 Volt, takes 2" Ball, has cracked plastic
Broderson 8-1/2 Ton Crane, 20' Max Extend, Propane Overhead Valve Continental 4cyl Foam Filled Tires Model IC801B, Pintle Hitch, 1394 Metered Hours
Bobcat M720 Skid Steer, 5' Bucket, Newer Tires
Hyster Model s120xl, 12,000 pound x 160.0" maximum capacity L.P. Gas Forklift Truck, Overhead Guard, Hard Tires
Apache model A300AHT, 30,000 capacity fork lift with V8 engine (runs on propane), solid rubber tires, non-marking on front, 8" x 94" forks, approx. 120" max. lift height, 3886 hour on meter, (unit run
FADAL VMC6030 CNC VERTICAL MACHINING CENTER MODEL: 907-1, (1996), FADAL MODEL CNC88HS CONTROL CONSOLE, 3 AXIs OPERATION, 21 POSITION AUTOMATIC TOOL CHANGER, 30" X 60" T -SLOTTED POWER FEED TABLE, COOL
Yale Forklift, Model#GLP040AFNUAE084, 4000lbs Capacity, 3-Stage Mast with Side Shift, 42" Forks, with LP Tank, 5912 Metered Hours
Hyster Forklift, Model# S40XL, 4000lbs Capacity, 3-Stage Mast with Side Shift, 42" Forks, LP Tank
2009 Genie S-40 Refurbished Boom Lift, with 26 Hours since Refurbished Ford Dual Fuel Engine. New Tires, New Controls, All Systems Updated to meet 2009 Specifications, Propane or Gas
Genie TMZ-34/19 Towable Boom Lift, Manufactured 2002, 500 lb. Capacity, 24 Volt, takes 2" Ball, has cracked plastic
Broderson 8-1/2 Ton Crane, 20' Max Extend, Propane Overhead Valve Continental 4cyl Foam Filled Tires Model IC801B, Pintle Hitch, 1394 Metered Hours
Caterpillar Model V40 Propane powered forklift with 4000 pound max lift capacity, 158" max lift height, 24' load center, side shifter, 4" x 41" forks. 2025 hours on meter, weight 7354 lbs.
Antonino Mantello model B7 edge Machine with 170" travel
Quincy model QC25024D00002 climate controlled air compressor with approx. 200 gal. tank and 230/460 volt, 25 Hp, 760 RPM, Baldor industrial motor (in working condition) along with (1) Pyramid 2000 evo
Lincoln Impinger 2-tier commercial oven model 1132 120/208 volts 3-phase
Stoelting commercial ice cream maker model U431-409 208/230 volts 3-phase
Monarch model VMC 45B, 220/440 volt, 3 Ph vertical machining center with Dynapath Delta, 18 1/2" x 48" table, 30" X travel, 18" Y travel, 10" Z travel, chip conveyer, 4th axis, automated tool changer
Fanuc Robodrill model A-T14IA, 220/440 volt, 3 Ph, CNC drilling and tapping center with Fanuc series 16I-M controls, 19.69" X travel, 14.96" Y travel, 11.81" Z travel, 14 position tool changer, 15" x
Fanuc Robodrill model T21IFLB, 220/440 volt, 3 Ph, CNC drilling and tapping center with Fanuc 31IA5 control, 27.5" X travel, 15.7" Y travel, 12.9" Z travel, 21 place tool changer, 16" x 33" table
Sharnoa model HPM-30, 220/400 volt, 3 Ph vertical machining center with 30" X travels, 16" Y travels, 21.5" Z travels, side mounted 24 place tool changer, digital XYZ read out, 16" x 36" table (MFG. 0
Chevalier model FM-3VS, 220/440 volt, 3 Ph, 3 Hp vertical milling machine with 9" x 48" table, variable speed, 60-4500 spindle speed, Sony XY digital read out
W.F. Wells model L10, 115/230 volt, 1 Ph, 1.5 Hp horizontal band saw with 10" x 16" capacity, 1" blade, coolant
Sullair model ES-8, 220/440 volt, 3 Ph, 25 Hp screw type air compressor with approx. 100 gal. horizontal tank.
Lincoln model RL25 1236E, 110/220 volt, 1 Ph, 1 1/2 Hp, geared engine lathe with 12" x 36" capacity, 70 to 1500 RPM, 1.5" spindle,
Daewoo model G20E-3 type LP propane sit down fork lift, with a maximum load capcity of approx 4000# hours at approx 05060.5, key not included (Working condition unknown, could not test), unit appears
Yale GLP040AFNUAF084 propane sit down forklift, type LP, working condition unknown unable to test, Ignition and seat appear to have damage and in need of repair with a maximum load capacity of 4000#?s
Crown model RC3020-30 electronic rechargeable stand up fork lift, type E with cascade side shifter, 36 volt, with a maximum load capacity of approx 3960#, hours approx 10786.2
Crown model RC3020-30 electronic rechargeable stand up fork lift, type E with cascade side shifter, 36 volt, with a maximum load capacity of approx 3960#, hours approx 10625.8
Daewoo model G2DE-3 sit down propane fork lift type LP, with a maximum load capacity of approx 4000#, hours at approx 03963.6,
Komatsu model FG20C-12 sit down propane fork lift type LP, with a maximum load capacity of approx 4000#, hours approx 05656.2, key not included (Working condition unknown, could not test), seat and ig
Crown model RC3020-30 electronic rechargeable stand up fork lift, type E with cascade side shifter, with a maximum load capacity of approx 3960# (Working condition unknown, could not test), hours appr
Crown model RC3020-30 electronic rechargeable stand up fork lift, type E with cascade side shifter, with a maximum load capacity of approx 3960# (Working condition unknown, could not test), door panel
Daewoo model 620E-3 approx 4000# capacity propane powered fork lift key included, hours on unit 3170.5
Komatsu model FG 20C 11 approx 4000# capacity propane powered fork lift. key included, hours on unit 7217.7
Bil Jax model ESP19 approx 450# capacity 24 volt rechargeable stock picker lift key included, unit powers on, unit appears to work.
Crown stand up fork lift 3000 Series, 36 volt, type E key is included battery is included possibly needs repairs
Daewoo fork lift model G20E-3 type LP (working condition unknown, unable to test) repairs possibly needed, rust visible very used condition
Komatsu Fork lift model FG20C-12W type LP (working condition unknown, unable to test) propane tank NOT included visible rust and minor dents
Komatsu propane operated fork lift model FG20C-11 type LP very used condiiton (working condition unknown, unable to test) forks appear to be missing rust damage visilbe repairs possibly needed.
MEC 1632 Scissor Lift, 16ft Reach, In Working Condition
MEC 2548 Scissor Lift, 25ft Reach
Well Drilling Rig-1985 International S-1900 Well Drilling Rig, 215,634 Odometer Miles
2002 Sterling Elgin SC8000 street sweeper 29,270 Miles
MEC 2548 Scissor Lift, 25ft Reach, In Working Condition
2003 Skyjack SJ111 4626 Scissors Lift, Model SJ4626, 24-Volt, 3-Person, 850lb Capacity, 26' Platform Height, 225 Metered Hours
Fanuc S420-W Robot with R-ST Controller System, Robot Controller Type A05B-2350-BOO4, 480 Volt, 3-Phase
2000 JLG 33RTS, #2000264890 Scissor Lift, Dual Fuel, 4x4, Factory Reconditioned
1990 International 4800 x4x Utility Boom Truck, 466 Diesel Motor, 142,342 Odometer Miles, Auto Trans, 2-Door, 4x4, 50' Altec Boom with Bucket
Toyota Forklift Model 5FGL20, LP-no tank, 4,000 lb. Capacity, 2-Stage, 42" Forks, Side Shift, 18,476 Metered Hours, rip in seat
Toyota Forklift Model 5FGL20, LP-no tank, 4,000 lb. Capacity, 2-Stage, 42" Forks, Side Shift, 18,476 Metered Hours, rip in seat
1999 Woodchuck WC-17 12" Disc Chipper, Perkins Diesel Motor, 1891 Metered Hours, Pintle Hitch, Lights, Tire Tread 60%, side covers missing
1996 Sky Trak 6036, 8972 Metered Hours, Turbo, Diesel, 46" Forks, 6000lb Capacity, 36' Reach, Faded Paint, Rust, Runs and Operates
Hyster, model S50XM, year unknown, LP gas powered, side shift, motor 3.0 liter 4 cyl. Capacity 4600, hours 5077, fork length 60?, 3 stage, foot pedal forward/reverse, tape on arm rest, seat has rip, n
Hyster, model 60XM, year unknown, diesel powered, side shift, motor, ISUZU 4 cylinder, lift height 178?, capacity unknown, hours 9003, fork length 48?, 3 stage, steering wheel has rips by horn button,
Hyster, S155XL2, year unknown LP gas powered, side shift, 2 speed gear drive, motor V-6, Lift height 133?, capacity 14250, hours 1516, fork length 72?, 2 stage, side shift not working, steel 40? tank,
Caterpillar Model GP25K Hi/Low, 5,000lb 2-Stage, 44" Forks, Pneumatic Tires, LP - No Tank, Does Not Run, 9449 Metered Hours
Caterpillar Forklift, Model#GC25K, 5000lbs Capacity, 3-Stage Mast with Side Shift, 42" Forks and LP Tank, 06637 Metered Hours
Clark 3-Wheel Forklift, Model#TW25, 2500lbs Capacity, Lifts 106", 24volt with Battery & Charger, Solid Tires, 9783 Metered Hours
CAT Forklift Hi-Lo, Model #GP30, 6000LBS Capacity, Lifts 189", 3-Stage Mast, Side Shift, 72" Forks, Pneumatic Tires, 4334 Metered Hours, LP with Tank
Genie Boom Z-30/20 Heavy Duty Boom Lift, 1540 Hours, Built-In 115-Volt on Board Charger, 30' Platform Height, 500 lbs. Capacity, Tires have Tears, Boom Works, Drive Train Does Not Work
1987 Ford L8000 Vacuum Truck, Ford Motor, 94249 Odometer Miles
1997 Ford Boom Truck, 144' Reach Ford 8.3L Motor, 77,271 Odometer Miles, Manual 8-Speed Road Ranger Transmission, AM/FM, Air Brakes, Single Stack
Vermeer LM25 Cable Puller, Cable Puller Attachment Model VP25, 25 HP Kohler Gas Motor, 350 Hours
Terex SS 644C Extendaboom Forklift, 6000lbs Lift Capacity, John Deere Turbo Diesel Motor, Newer Paint, Good Tires, Broken Glass
Case W4 Articulating Off Road Forklift, 4x4, 4cyl. Diesel, 12' Fork Height, Lift and Tilt, 376 Metered Hours
1982 Condor 46N, LP gas powered, gas powered, 2X4, Hi-lo speed gear drive, motor 4 cyl Wisconsin, lift height 40?, capacity 500lbs, hours 3893, 85% tire tread left, 4? basket, foamed tired, fresh pain
Nissan LP Forklift,, Model CPH02A25FV, 3-Stage Mast, 42" Forks, Hour Meter Reads 9119, Hard Tires, 4400lbs Capacity
Caterpillar Forklift Model #GC20K, 4,000lb Capacity, Lifts 188", LP - with Tank, 3-Stage Mast with Side Shift and 42" Forks, 5797 Metered Hours
JLG Scissor Lift, Model #26-46E, 24-Volt Electric, Lifts 26'
2006 TCM Forklift, Model #FCG25-3HL, 5,000lb Capacity, Lifts 189", LP - with Tank, 3-Stage Mast with Side Shift and 42" Forks, 6408 Metered Hours
1998 Genie S-60 Boom Lift, Said to Be Refurbished in 2009, Diesel Motor, 1183 Hours, 4x4
Genie S-40 Boom Lift, Said to be Refurbished in 2009, Newer Tires, 25.4 Hours, Propane or Gas Ford Motor
2002 JLG man lift, model 3369 LE, hours 363, 48 volts, elevated height 33?, deck size 65? X 115?, platform extension 3?, wheel base 7? 6 ??, platform capacity, 1000 lbs, 21 amp automatic charger, 8-6
John Deere 482C Rough Terrain Fork Lift, 4x4, Lift, Tilt, Shift, John Deere Diesel Motor
Hyster Model KE Karry Krane 6000lbs Capacity Dual Front Wheels, Dual Rear Steer Wheels ,Propane Motor
Genie Boom Z-30/20 Heavy Duty Boom Lift, 1540 Hours, Built-In 115-Volt on Board Charger, 30' Platform Height, 500 lbs. Capacity, Tires have Tears, Boom Works, Drive Train Does Not Work
Yale Forklift Model G51P-040-CBS-U, Pneumatic Tires, 2-Stage Mast, LP (No Tank), Service Manual in (BDO), 4000lbs Capacity, 299 Metered Hours Showing
Clark ECS20 Electric Forklift with Charger, 3902 Metered Hours, Capacity 4,000#@24", 152 Max Lift, 3-Stage Clear View Mast with Free Lift, Side Shift, Non-Marking Tires, 36-Volt, GNB SCR Charger 100 M
Clark Model GCS20MB LP Forklift, 3-Stage Clearview Mast with Free Lifth, Auto Trans., Capacity 3,350# @ 24", Max Lift 188", Side Shift, Includes Tank, 42" Forks, Non-Marking Tires
Proth PSGS3060AH 12" x 24" Hydraulic Surface Grinder, 12" x 24" Electromagnetic Chuck Dresser, Power Feeds, (1996), with Coolant & Hydraulics
Lantech QX300 XL Wrapping Machine, 115volt, 50/60Hz, 64" DIA Table, G Series Controls, Variable Speed, Variable Force, Variable Roll Carriage Speed, 20" Film Poll
Lift Master, model 621-4-6 Year unknown, gas powered, 2X4, side shift, unknown speed gear drive, motor 3 cylinder, lift height 21? mast, capacity 6000 lbs, hours unknown, fork length 48?, tire approxi
1996 Multitech 2040XP Firewood Processor, powered by John Deere 4-Cylinder Diesel, Hour Meter reads 03451, Towable, Pintle Hitch Style, Sells with Towable 30' Conveyor, takes 2" Ball, Hydraulic Powere
Dreis & Krump (Chicago) Model BP0-414-6 4' Finder Brake with Multiple Fingers and Straight Rail Tool
JLG Commander 1432 Scissor Lift Model CM 1432, 14' Max Height, 500lb Max Capacity, 24-Volt
Wysong Model 1472 6' x 14ga Shear, Hydraulic Holdowns Foot Pedal
DoAll Model "16" 16" x 54" Engine Lathe, 8" 3-Jaw Chuck, Taper Attachment, Accurite Digital Read Out, Approx. 3" Hole, IN/MM Threading
Chevalier Model FSG-2A818 2-Axis Hydraulic Surface Grinder, New Approx 2003. 8" x 18" Electromagnetic Chuck with Neutrofier Sony 2-Axis Digital Read Out, Coolant
Lagun Model FTU-15 Variable Speed Vertical Milling Machine. ACU-Rite III 2-Axis Digital Readout. Power Drawbar
Clark Hi-Lo, Model C500YS80, 8000 lb. Capacity, 4-Cylinder Perkins Diesel Motor, 3800 Metered Hours, 2-Stage Mast, said to have been sitting for a couple years, runs and moves but needs brake work, ne
Toyota Forklift, Model #40-FBE15, 5913 Hours, 3-Stage, Lifts 187", 42" Forks, with Battery and Charger, 24-Volt
New Nachi Robot Model B02CH019 6-Axis CNC Material Handling Robot Maximum Reach 1370mm, Repeatability +/- 01mm, Motion Speeds 130? or 150? per Second, Maximum Payload 6 kg, 200/480 Volts, Control Uni
Caterpillar 3-Wheel Electric Hi-Lo, 3250# Capacity, 217" Lift Height, Model EP-18KT, 36 Volt, Solid Tires, 42" Forks, Side Shift, 7896 Hours
Toyota 5000# Hi Lo, Model 42-4EGC25, 106" Lift Height, Propane, 42" Forks, Hard Tires, Tank is Included
Crown Lift Truck Model 30RDTT-S, 36 Volt, 3,000lb Lift Capacity
Crown Lift Truck Model RD3520-30, 36-Volt, 3000lb Lift Capacity
Clark Walk-Behind Electric Forklift, Model ST40B, 24-Volt, 4000lift Capacity, with Mac Charger, Up, Down, Tilt, works
2008 S-130 Bobcat with Bucket, 753 Metered Hours, Hi and Lo Flow, Kubota Diesel 2.4L Motor With Cab Heate
2004 T-180 Bobcat with Tracks and Bucket, 1442 Metered Hours, Diesel
MEC Scissors Lift, Model 1932ES Manufactured 2000, Extendable Platform, 24 Volt, Max Height 18'10"
DoAll Model TF-14H Vertical Band Saw 440 Volt, 3-Phase, with 20-Gallon Hydraulic Power Unit, by Continental Hydraulics, Model 144221-F
Caterpillar Forklift Model #GP30K, 6,000lb Capacity, III Stage mast with Side Shift, with 42" Forks, Propane, Runs and Operates
Case 586E Rough Terrain Forklift, Cummins Diesel Engine, Auto Trans, 21' Mast with 48" Forks, 3857 Metered Hours
1989 GMC Diesel 7000 Bucket Truck, 8.2L Motor, 127,575 Odometer Miles
Yale fork truck model: GLC030AENEAE096 year unknown, propane Yale 4 cylinder motor, comes with tank, 3 stage side shift, forks 42", capacity 3000lbs., hours: 11836, solid tires, few nails in tires, mi
Toyota Electric Hi-Lo Forklift, Model 5FBCU25, 48 Volt, 4200 lb. Capacity @ 20", Lift Tilt Side Shift, 3-Stage Mast, Exide Gold Charger, 13596 Metered Hours
New 2010 Easy Kleen Magnum Gold 4000 PSI Pressure Washer, 15-HP Motor with Direct (3400 RPM) 12V Fully Self Contained, ? Electric Start ? Triplex plunger pump with stainless steel valves and brass man
New 2010 Easy Kleen Magnum Gold 4000 PSI Pressure Washer, 15-HP Motor with Direct (3400 RPM) 12V Fully Self Contained, ? Electric Start ? Triplex plunger pump with stainless steel valves and brass man
Electra-Saver II 40-HP Screw Air Compressor, Model ECHSHF, 460volt 3-Phase
Genie 1930 Scissor, Clean, Just Serviced, Works as it Should, 19' Platform Height, 25' Working Height, 30" Wide, Newer Batteries, 452 Hours
Clark Forklift, 8,000 lbs., Sells with Propane Tank, Model C500-YS80, Mast 86/123 Duplex, with Fork Positioner, 48" Forks
Sullair LS-12, 50HP rotary air compressor, New screw compressor and radiator installed, housing dented, 79,427 hours on meter, operating pressure 110 PSIG.
Blastcrete Model 3536 Mixer Pump, Self Contained/Kubota Diesel Motor, 2" Squeeze Pump, 9 cu.ft Mix, 12 cu.ft. Hopper, 100' of 2" 800# Hose, 200' of 1-1/2" 800# Hose, Clamps and Seals, 52 Metered Hours
Case Model 1840 Uni-Loader Skid Steer, Diesel Engine, 650x16 Tires, Lights, LED Panel, Quick Attach Bucket, 1386 metered hours.
Marvel Model 81/M25/M3M/M9 Fully Automatic Vertical Bandsaw with Chip Removal, Mitering, Power Vise,
Clausing Model 20/277 Floor Standing Drill Press, Vari-Speed 150-2000 RPM, 6" Quill Travel, T-Slot Adjustable Table, 3-phase, 460 volt.
Kaeser Model HS760, 600-HP Rotary Screw Air Compressor, 13,000 Load Hours
Bridgeport Vertical Mill, Vari-Speed, 60-4200 RPM, Power Cross Feed, Mitutoyo 2-Axis Digital Read-Out, 9" x 42" T-Slot Table, with 6" Machine Vise
Cincinnati Model 1010 Shear. 10-Gauge Capacity, Manual Back-Gauge, Stroke Counter, Foot Trip, Front Guard
2006 Nifty Boom lift 34? articulated telescoping boom max height 40 reach 20?, 12? footprint, GVW 2860, 500lb platform capacity, when stowed height 6?3?, 4?11? wide, 14? 7? length, platform size 25?x4
535 Ridgid Pipe Threader, 1/4" to 2" Pipe, Has New Seals, Rails, and Oil Pump, Has Good 1" to 2" Dies
Ridgid K-7500 Sewer Snake, 100 Volt, extra bits and 50' cable
535 Ridgid Pipe Threader, 1/4" to 2" Pipe, Has New Seals, Rails, and Oil Pump, Has Good 1" to 2" Dies
535 Ridgid Pipe Threader, 1/4" to 2"
Toyota Fork Lift, Scrubber 54" Forks LP, Hard Tires, 185" Lift, 4700 Capacity, Model 42-4F GC25, 7846 Metered Hours, Sells with Tank
Ridgid K-7500 Sewer Snake, 100 Volt, extra bits and 50' cable
2006 Nifty Boom lift 34? articulated telescoping boom max height 40 reach 20?, 12? footprint, GVW 2860, 500lb platform capacity, when stowed height 6?3?, 4?11? wide, 14? 7? length, platform size 25?x4
Bandit 200, wood chipper, mid 90?s, Cummins 4.0 liter, diesel, 1804 hours, pintle hitch, 12? auto feeder, has oil pressure switch, has few minor bends
Clark Forklift, 8,000 lbs., Sells with Propane Tank, Model C500-YS80, Mast 86/123 Duplex, with Fork Positioner, 48" Forks, 2-Speed Trans, 2414.9 Metered Hours, cushion tire, electronic ignition, Has
Skyjack Scissors Lift, SJII 4626, 26' Max Height
2000 Genie GS-2032 Scissors Lift, 332 Metered Hours
Yale Forklift, Model#GLP060TENUAE86, 48" Forks, 15,386 Metered Hours, 5,000 lift capacity
TCM Forklift, Model#FG15N15, 42" Forks, 3978 Metered Hours, 3,000 lift capacity
TCM Forklift, Model# FCG25N6, 36" Forks, 8476 Metered Hours, 5,000lb lift capacity
SCMI planer, model: S520, 230 volt, 3 phaze
SCMI shaper table, model T130N, with adjustable slide table guide, 230 volt, 3 - phaze
SCMI shaper table, model T130N, with STEFF cutting head, model:2048, 230 volt, 3 - phaze
Maxtron 450 Miller Welder, 230/460V, Single or 3-Phase, with Miller 22A Wire Feeder, 400 Amp Gun
Sullair 1600 H Portable air compressor, 805 metered hrs., Detroit diesel 8V92 engine, operations flow, 1600CFM, working pressure, 150PSIG, works, has flat tire, needs batteries
2004 Caterpillar skid steer, Model 257B, Cat diesel engine model:3024c, rubber tracks, 68" wide bucket, enclosed cab, rear window is missing, side window on the bottom is missing, hour meter is not wo
1985 International Model 1954 Boom Truck, International DT-466, 7.6L Motor, 134,353 Odometer Miles, 2802 Metered Hours
Miller Arc Pak 350 Welder, with Wire Feed, 230V/460V, Single Phase
New 2010 Easy Kleen Magnum Gold 4000 PSI Pressure Washer, 15-HP Motor with Direct (3400 RPM) 12V Fully Self Contained, ? Electric Start ? Triplex plunger pump with stainless steel valves and brass man
Ingersoll Rand P-100 Towable Air Compressor, 4-Cylinder Gas Ford Motor, ,takes 2" Ball, runs and builds good air pressure
Clark American Floor Sweeper, Model #505-102, S/N:702202, LP Gas Powered, 0837 Metered Hours, New Battery
Bridgeport Series 2 CNC Mill, 3-Phase, Comes with Hard Drive and Display, Includes Extra Belts and Tooling, 48" Table, Boss 6 Controls/Digital Read-Out, Works/Operates, Floppy Drive, Worklight, Auto L
Cat Air Tire Forklift, Model #V40C 4,000 lb. Capacity, LP with Tank, 4765 Metered Hours, hydrostatic trans
1985 Kohler Generator, model 100ROZTI, 100 KW, 150.5 AMP, 277/480 Volt, 3 phase, 125 KVA, 599 Metered hours.
2000 JLG 800A, Diesel powered, 4X4, Hi-Lo speed gear drive, motor, Duetz 4 cylinder, hours 4171
2002 Genie, model Z-45/25, LP gas powered, gas powered, 4X4, Hi-Lo speed gear drive, motor: Ford 4 cylinder LRG 425 EFI, hours, 2537
2002 Genie, model S-40, LP gas powered, gas powered, 4X4, Hi-Lo speed gear drive, motor, Ford 4-cylinder, capacity 500lbs, hours 2435.
2000 JLG , model 33RTS 4X4X2, LP powered, gas powered, 4X4, Hi-Lo speed gear drive, motor, Ford 4 cylinder, water cooled propane/gas engine, lift height 33?, capacity 1500 lbs, hours 3323, tire approx
2001 Lull, model 644B-42. Diesel powered, 4X4, 4 founded and 4 reversed speed gear drive, motor Cummis 3.9 liter., hours 3116
Michael Byrne Hydraulic Power Unit, Model HPU-200,
Sullair Towable Air Compressor, Model 125-GPQ-2W-TO, 1363 Metered Hours
Michael Byrne 20" Boring Machine, Model H16-200
McLaughlin 16" Boring Machine, Model MCL-16. Sells with Misc. Bits, Rings, and Approx. (15) 4" Augers
2000 Ditch Witch JT920L Directional Drill Machine, 353 Metered Hours, 45-HP Diesel Engine, 13 GPM Fluid Flow, 182 RPM Max Spindle Speed, 12" Max Backreamer Diameter, 10' Pipe Length, 7000-10000lbs Cap
Marvel Band Saw, Series 81, Model 81-8/5m
Clark Forklift, Model #C500-120, 2-Speed Auto, 135" Lift Height, 12,000 lb. Lift Capacity, LP, 814 Metered Hours
Skyjack Scissors Lift Model 4626, 850lb Capacity, 26' Height, Extendable Platform
Fanuc S-420IW Robot with 1997 R53 Controller, Robot Model# 022/1500, R-J2 Controller Model# F-31999 with Teaching Pendant
Euromac Variable Angle Notcher, Model:AV220-6, 220/480 volt
Enco vertical mill, model #100-1520, MFG date 1995, 240/480 V, 3 phase
1999 Genie 65 2668-1C Man Lift, Kubota Gas, Dual Fuel Engine, Propane or Gas, 3102 Hours, 4x4. Lift was rebuilt by the factory in 2007
2001 Skytrak 8042, 01042 Metered Hours, 42' Reach, 8000 lb. Capacity
Deckel FP42NC, X45 x Y18 x Z18, Vertical and Horizontal Mill, Delta 20-Control
Clausing Kondia CNC FV-1 Machine, Y12 x X24 x Z5, Delta 20 Control
Chevaliar Knee Mill Model FM-63K, Y16 x X32 x Z7, Delta 40-Control
Pro-Form Pipe Bender, Proformer II, 230 Volt, 5hp, 3-phase, with Manuals, Dies of Misc Sizes
Bandit Towable Chipper, Model 90 Ford Motor, 1074 Metered Hours, 2-5/16" Ball
Upright X26N 6528, 7' Extendable Platform, no power, dead battery
ARPAC EZ-Load Shrink Wrap Machine, Model PR04002-1D,120volt, Manufactured in 2008, 4000lbs Capacity, appears to have little use.
New 2010 Easy Kleen Magnum Gold 4000 PSI Pressure Washer, 15-HP Motor with Direct (3400 RPM) 12V Fully Self Contained, ? Electric Start ? Triplex plunger 11 gauge super strength steel skid frame compl
Case 530 Construction King Forklift, Runs, Main Lift Cylinder Leaks
1995 Ford F-Series Utility Truck with Man Lift, 7.5L V8 Motor, 140,942 Odometer Miles, 5-Speed Trans
Cincinnati model #9 Press Brake 225 ton x 10' long capacity, came out of operating shop where is was used as a punch press, works
Cincinnati model#14 Shear 3/16" x 10' long capacity, push button adjustable back stop, came out of operating shop, includes one extra re-sharpened shear knife, works
Tennant 550 Scrubber Vac, Continental Gas Engine, 1240 Metered Hours, Needs New Brushes
Toyota Electric Hi-Lo Forklift, Model 5FBCU25, 48 Volt, 4200 lb. Capacity @ 20", Lift Tilt Side Shift, 3-Stage Mast, Exide Gold Charger, Counter Weight is not Secure to Unit, Non-Working Condition
TB 420 Snorkel Lift, Model #TB-A420RFO, LP Gas or Gasoline Fuel, 33' Reach, 42' Platform Height
2002 Legacy Series Sky Track, Model 6036, Cummins 3.9L Diesel Motor, 2952 Metered Hours
1999 Peterbilt 357 Logger Boom Crane, 3406E CAT 550 HP Motor with a Overhaul on 04-21-08. ECM Miles 473,000, Odometer Miles 419,700
Yale Fork Lift, Model# GLC030AENVAE, 11,823 Metered Hours, 3000lbs Capacity, Propane, the Mast is 96/225 with Side Shift & LBR, 48" Forks, Hard Tires (fronts are non-marking), New Paint, Seat with Sea
Fanuc Robot S-420iw with RJ3 Controller
Genie Model PL1-30P Personal Lift, 30' Platform Height, 36' Working Height, New Battery
Mec Electric Scissor Lift, Model 2034HT, Built-In Charger, Works, 20' Platform, 26' Working Height, 34" Width, Runs & Operates Good Tires
Toyota Fork Lift Truck, Model 42-6FGU15, 3-Stage Mast, 266.1 Metered Hours, Side Shift, 3000lb lift capacity. Pneumatic Tires, Lift Height 189", 42" Long Fork, 83" tall to top of mast.
Caterpillar Lift Truck, Model M100B, 36-Volt, 10,000 lb. Max Capacity, 7444 Metered Hours
JLC 1932E2 Scissors Lift, Extendable Platform, Built-In Charger
Snorkel Scissors Lift, Model SL-20, Extendable Platform, Electric with built-in charger
Pettibone B66 Lift, 6000lbs Capacity, 36' Reach, 9781 Metered Hours, has scattered paint chips, the tires are a little weathered, has other normal wear
Cantek SRS 300 Straight Line Ripsaw, Model SRS 300, 3-Phase, 12" Blade, Fence with Maint Box.
Busy-Beaver Model 175 Chipper, Kohler Engine, 2" ball
Hepertherm Power Max 1000, G3 series plasma cutter, 200/480 volt, 3 phaze
Euromac Variable Angle Notcher, Model:AV220-6
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Miller, syncrowave, Tig Runner, MOD:250DX, 230/460 volt, 1 phaze
Case Comfort King 730 Tractor, Gas, Cab, PTO, 3-Point Hitch, Rear Hydraulic Remotes, 6289 Hours, Missing Some Glass on Cab, other windows cracked
6044 Pettibone All Terrain Forklift, 4x4, Extend-A-Boom, 2000 Diesel, 4 Wheel Steering, New Rubber, Serviced by Giar & Sons, 5689 Metered Hours, Maximum Lift Capacity 6000lbs (2722kg), 44' Max Lift He
1998 Lift King 4x4 Forklift, Model LK12ML42, 14' Lift Height, Diesel, Cab, Shuttle Shift 4-Speed Trans, Hydraulic Fork Positioner, 8' Forks, 12,000# Capacity, Unit Weight is 15,000# 5029 Metered Hours
Hyster Forklift, Model# J40XMT, 4000lbs Capacity, Lifts 189", 3-Stage Mast, Non-Marking Tires, with Battery Charger
Hyster Yard Type Forklift, Model# H50XL, 5000lbs Capacity, with LP Tank
Clark Forklift, Model#C500S80, 8000lbs Capacity, Lifts 170", 3-Stage Mast, Double Auxiliary Valve, Dual Fuel with LP Tank
1997 Fanuc 420i Material Handler Robot, 480volt, 3-Phase, RJ2 Controller
Commander Johansson Radial Drill Style 6790, A-Size, 440volt, 440volt 3-Phase, 1-3/4" Capacity, 2-1/2' Arm Length, MFG 1975
Bil Jax Work Force XLB-4725A Electric Towable Manlift, with Outriggers, 175 Metered Hours
1998 Genie Boom, Model Z-45/22. LP gas powered/gas powered, hydrostat drive, 4X4, Motor Ford 4 cylinder gas engine, hours 3899 hours, Capacity 500lbs, maximum height 45 feet, maximum reach 23 feet, sc
Atlas Copco 2006 Air Compressor, Runs, Model XA597(JD), 2.4 Diesel
1997 Daewoo /Grove truck mounted crane model: DTC21, max lift capacity 21 ton, four section boom 28?-94?, tele. Box JIB, Daewoo DE12Ti diesel engine, four outriggers-maximum span 19?, 24 volt electric
2000 JCB 532, All Terrain telehandler/forklift, 3542 Hours, JCB 3.9 Ltr, 4 cylinder turbo diesel engine, power shift transmission, 4 speed forward and reverse, 4 WD, front wheel, four wheel and crab s
1999 Freightliner, Model FL60 24? Box truck, Make of motor Cummin Diesel 5.9 liter, 6 cylinder, horse power 215 hp, and estimated miles 173,000, (123789 on odometer). Manual 6 speed, Cruise, AC, AM/FM
Tennant Model 465 Walk-Behind Self Propelled Floor Scrubber, 36 Volt, Works, Recently Serviced, Includes Batteries, 110 Volt AC Single Phase Input x 36 Volt DC Output Charger and Operator manual, 1263
Raymond Electric Straddle Reach Truck, Model# 21-R40TT, 3-Stage Mast, 85 Down, 180 Up with 36" Forks, 36volt, New Caster Wheels & New Handle Grips, 4000# Capacity, 1112 Metered Hours
Mitsubishi FG30 Propane Forklift, Hard Tires, 11829 Metered Hours, Runs, 6000# Capacity, 48" Forks, S/S, Dents on the engine cover, scratches
Grove 26-33E Electric Scissors Lift, Runs & Operates, no Brakes. Built-In Charger System, Platform Extensions
Ford 5610 Tractor with 5' Slide Wing Mower, 3-Point, PTO, ROPS, 4-Speed Trans with Hi-Lo Range. Has scattered paint chips, some surface rust, worn right rear tire, missing cap to one of the hydraulic
Farmhand 817 Grinder Mixer, has a Magnet on the Grinder with Screen
2009 Easy Kleen Magnum 4000, 4000 PSI Hot Water Pressure Washer (Unused)
2009 Easy Kleen Magnum 4000, 4000 PSI Hot Water Pressure Washer (Unused)
Mayville scissor lift model: MEC 2548HT 36 volt, hours unknown, capactiy 850, lift 24', deck approx. 8'x4', side damage, drop down platform, scattered scratches, nick & dents
TCM Forklift, Model #FCG28N6, 5,000 lb. Capacity, 4-Stage, Lifts 240", LP, 6958 Metered Hours
Hyster Forklift, Model #H110XL 11,000 lb. Capacity, New Dual Air Tires, Heated Cab, Gasoline, Lifts 197", 3-Stage, 48" Forks with Side Shift, 8855 Metered Hours, cracked windshield
JLC Scissors Lift, Model 2032E2 20' Platform Height
JLG Scissor Lift Model #3246 E2. 32' Platform Height, 2' Extension
JLG Scissor Lift Model#2646 E2, 26' Platform Height, 2' Extension
Fanuc Robot S-420iW Material Handling with R-J2 Controller, 480V, 3-Phase, Manufactured 1997
Morbark Timber Shear, Removed from Hydro-Ax, Can be Mounted on Excavator, Bobcat, Loader, Etc., No Broken Welds, All Hydraulics Work
Skytrak 6036 Extenda Boom Forklift, Diesel, 3-Speed Trans., 4x4, New Tires, Paint has Been Torched Up, 48" Forks, 5' Wide Carriage
MEC 33RT Scissors Lift 33" Platform, Gas, 4x4, Hydraulic Outriggers, 12 Volt, No Brakes, 2302 Metered Hours
Caterpiller ASV RC-30 Skidsteer, R-Series, Heated Cab with Quick Attach Forks, 1/4 Yard Bucket, Rubber Tracks, 1256 Hours, diesel
Clark Model C500135, 13.100 lb. 10 ft. 24?, 10,900lb. Lift 30?, 2 stage, side shift, 5? forks, L.P. gas, hour meter reads 698 hours, seat ripped
2009 Easy Kleen Magnum 4000, 4000 PSI Hot Water Pressure Washer (Unused)
2001 Genie TMZ 34/19 Towable Boom Lift, Electric, Manual Down Rigers
2000 Ingersoll Rand 185 CFM Air Compressor, John Deere Diesel Motor
1991Komatsu FG25-11 Fork truck 46? forks, side shift, 3 stage 170 mast, 93 hours metered, actual unknown
Edco GMS20-13H Block Saw, 13-HP Honda Gas Engine,20" Blade, Approx. 2-Years Old
Bobcat 720 Rubber Tire Skid Steer, Hydrostat Foot Controls, 2812 Metered Hours, Tires have Good Tread but show weather cracks, Wisconsin 4-Cylinder Gas Engine, 60" Bucket, Quick Attach, sometimes the
1998 Genie S-40 Boom Lift, 4x4 40' Cap, 4798 Metered Hours, Diesel Motor
Caterpiller ASV RC-30 Skidsteer, R-Series, Heated Cab with Quick Attach Forks, 1/4 Yard Bucket, Rubber Tracks, 1256 Hours, diese
Cleaver Brooks model CB 200-200, 460 volt, 3 Ph, 200 Hp, 15 Amp, 150 max. pressure PSI, natural gas powered packaged boiler, Mfg. 12/11/87, Input 8369000 BTU/hr. includes (1) approx. 100 gal feed wate
Atlas Copco model GA 37 AP, 132 PSI max. final pressure,220/440 volt, 3Ph, 50 Hp, 3600 R/Min. air compressor
Ludell model DC2200, 220/440 volt, 3 Ph, 750 min. BTU/Hr. input, 2200 max. BTU/Hr. input ultra efficient water heater with power flame burner, model CR2-G-20A, 220/440 volt, 3Ph, 5 amp, 3/4 Hp gas pow
Consolidated model 400G, 220/440 volt, 3 Ph, 400 # dry weight capacity, 2,700,000 max. BTU input, natural gas, 31 Hp laundry drying unit
Norman model 123H, 575 volt, 3 Ph, 400 # dry weight capacity dryer unit, (MFG. 8/26/88) includes transformer
TWashex model 600 FLA-P4, 220/440 volt, 3 Ph, 600 # capacity laundry washing unit with 60 # PSI max. water pressure, 100 # PSI max. steam pressure, 90-100 # PSI compressed air, (MFG. 1972) includes (3
Washex model 600 FLA-P4, 220/440 volt, 3 Ph, 600 # capacity laundry washing unit with 60 # PSI max. water pressure, 100 # PSI max. steam pressure, 90-100 # PSI compressed air
Washex model 46/110 FLA-P4, 220/440 volt, 3 Ph, 700 # capacity laundry washing unit with 75 # PSI max. water pressure, 100 # PSI max. steam pressure, 90-100 # PSI compressed air,
Caterpillar (CAT) model GC25K, 4350 lb capacity propane powered fork lift with 188" max. lift height, 4" x 42" forks, side shifter, solid rubber tires with non-marking rear tires, 4909 hours showing o
Komatsu model FG30HT-12, 6000 lb capacity propane powered fork lift with 138" max. lift height, pneumatic tires, 5" x 48" forks, 1558 hours showing on meter, (does not include propane tank, unit is in
Nissan model N015110, 48 volt, WITH CHARGER, 3200 # capacity, 3 wheel electric fork lift with 180" lift height, 4" c 42" forks, side shift attachment, single stick lift and tilt, 6588 hours on meter
Champion model VR10-12 commercial air compressor with tank , hours on unit 4479.4 and (1) Champion model CRN75A1 115 volt single phase compressed air dryer
Masterstone 4000 CNC with 13' long x 88" table, Masterstone control unit with Osai numerical controls, (4) separate air manifolds, (14) tool holders on either end (MFG. 2001) includes air lifting mech
Camma model FRESA-A-PONTE 16" master saw (programmable bridge saw with approx. 14' travel) with programmable guide laser, hand held remote, control center, 5 extra diamond blades, (MFG. 2002), (1) 16
Elephant model GRU-A-BANDIERA approx. 1000 # capacity lift with 18' fully extended arm (MFG. 2002)
Atlas Copco model GX22, 30 Hp, 220 volt, 3 Ph, air compressor with approx. 100 gal. tank and 5821 hours, and (1) Atlas Copco model FD60 air dryer (may need minor repairs) (air compressor in working co
Hyster model S80B 8,000lb capacity Fork Truck, with triple stage mast, LP Gas, runs and works
Clark model C500HY40 4,000lb capacity Fork Truck, single stage mast, LP gas, with a boom, pneumatic tire, runs and works
CAT model V40B 4,000lb capacity Fork Truck, LP Gas, pneumatic tire, single stage mast, runs and works
Solar Gas Turbine Gen Set. Model# T-1020S-8A 600V,60 CY,Cat Engine,726 Hrs
Yale Electric Fork Truck Type E, Model# ERC080HDN36SE084
DoAll Hydraulic Auto Horizontal Bandsaw, Model# C-5A 10" x 16" Capacity With Bar Feed Table
South Bend Lathe, Model# 440 8" x 60" Capacity, 2" Spindle Hole, Inch & Metric Threading 1800 RPM GAP, 12" - 3 Jaw Chuck
Taylor Winfield Spot Welder, Model# 68321, Type ENC 12-75 Air Operated, KVA 75 V 220, 19" Throat Foot Pedal Control
Onan Diesel Electric Gen Set, Model# 200.ODFP-17R, Time Rating-Stand By HZ 60, RPM 1800, KW 200, KVA 250, 3 Phase, V120/208 A694, V127/220 A
Norton (Warner & Swasey) Plain O.D. Grinder, Model# LCTU, 20 HP Spindle, 26" Grinding Wheel, Wheel Guard Dresser, Pick Feed Truing
Niagara A-60 Press, 60 Ton 4 Inch Stroke 100 SPM
Niagara A-60 Press, 60 Ton 4 Inch Stroke 100 SPM
Niagara 43 Ton O.B.I. Press, 5 Inch Stroke 85 SPM, Air Clutch
Niagara 43 ton O.B.I. Press 5 Inch Stroke 85 SPM, Air Clutch
Nachi Red Ring Gear Roller, Model# RGA, Duel Die System, Auto Parts Loader
Moore G-18 #3 Jig Grinder
Minster O.B.I. Press, Model# TR-24-2F-AU 60 ton 6" Stroke, 36" Bed, Light Curtains, Palm Button Controls, Wintriss Clutch/Brake Control
Marvel Vertical Bandsaw, Model# MV525APC,1 5/8" Blade Width, Auto Tilt, Auto Double Grip Bar Feed
Littell Coil Cradle & Straightener, Model# 852-5PD Cradle - 72" Max Diameter 50" Max Width, Straightener - .250" Max Thickness 52" Max Width, 40000# capacity, Peeler Attachment
Kearney & Trecker Horizontal Mill Machine Model# 630 TF-20, 19.5" x 114" T-Slot Table, 1500 Max RPM, Hartford Super Spacer, 12" Diameter Right Angle Table Attachment
Femco Drill, Model# WRD 50/1500 5' Arm 15" Column, Power Elevation 40 to 1920 Spindle RPM 7.5 HP, Coolant, 18" x 26" Two Sided Box Table, MFG. 1980
Devlieg 3B Jig Mill 3" Spindle36" x 60" T-Slot Table, Sony 3 Axis Digital Read Out, 48" Vertical Travel
Devlieg 3H-72 Spiralmatic Jig Mill Spindle, 35" x 72" T-Slot Table, Sony 3 Axis Digital Read Out
Cincinnati #6 Vertical Mill 1400 Max RPM, 20" x 104" Table, 40 HP
Chicago 225 ton Mechanical Press Break, Model# 506-D, S/N F-3819, 96" Capacity
Calavar Condor 68 Man Lift with Wisconsin Motor Model# VG4D for use with Gas or Propane. Max Platform Height 744 Inches, Max Horizontal Reach 600 Inches, Rated Load Radius 582 Inches, Hydraulic Operat
Magnaflux, Model# A-940L Control Circuit 115 Volts, Max Sec. Volts 19 AC, Max Output Amps 4000, Duty Cycle @ Max 5 Sec. On - 20 Sec. Off, Single Phase 460 Volts 50/60 Hertz, 98" Max Capacity
Raymond model EASL, 3000 # capacity, 24 volt electric stand up fork lift with 192" max. lift height, 4" x 42" forks, (hours unknown)
Drexel model SL-44-3-ESS, 36 volt, 3000 # capacity electric fork lift with 180" max. lift height, 4" x 48" forks,90 degree mast for side loading (hours unknown)
Schreck model RRH-S-E, 36 volt, 4200 # capacity stand up fork lift, 2 stage mast, scissor out fork attachment, side shift attachment, 30' max. lift capacity, 333 hours on meter
Cleveland model SD2-130-60-32, 130 ton capacity straight side double crank press, with air clutch, dual palm controls, 12" stroke, 6" adjustments, 25" shut height, 20 SPM, 60" x 32" bed area (MFG: 196
Cleveland model 80D-96-300, 300 ton capacity straight side double crank press, with air clutch, palm controls, tie rod construction, 14" stroke, 25" shut height, 17 SPM, 50" x 96" bed area, 20" window
Armstrong-Blum (Marvel) series 8, model MARK-1, 230 volt, 3 Ph, vertical band saw. Includes (1) adjustable height steel stand.
Kent model KRD3050 radial arm drill with approx. 6' arm, 15" column and box table
Super Max model LG1643 engine lathe 440 volt, 3Ph with approx. 16" swing, 63" bed, chip tray variable speed, over head light, tailed stock, 8" diameter 3 jaw chuck and foot controls
Lagun Republic model FTV-2S vertical milling machine with a Sony digital axis readout, 50" table, 6" machinist vice and various tooling
Okuma model MC60VAE vertical machining center with 5000 RPM spindle, 50 taper, 20 ATC, 59.06" x 24.8" x 24.02" travels, chip conveyer and OSP 700M CNC unit
Hurco model BMC4020HT/M vertical machining center with 8000 RPM spindle, 24 ATC 40" x 20" x 24" travels full enclosure, 40 taper and Ultimax 4 dual screen CNC unit, (MFG. 1998). Includes (2) 8" Kurt m
Depo model MCTV-125EZ, 400 volt, 110 amp CNC vertical machining center dual pallet type, with (2) 23 x 51" pallets, (2) 16 position ATC, Heidenhaim CNC control, chip conveyor, power feed vertical head
Mitsubishi model M-V70E, 480 volt, 90 amp CNC vertical machining center with 23 3/4" x 47 1/4" table, (overall travels: X axis 49.13", Y axis 27.57" and Z axis 25.62"), 40 position ATC with TSUDAKO mo
Mori Seiki model SV-500 B/50, 460 volt, 3 Ph CNC vertical machining center with 23 1/2" x 52" table, (overall travels: X -axis 40", Y axis 20" and Z axis 20"), 30 position ATC, chip blaster high press
Mori Seiki model SV-500 B/50, 460 volt, 3 Ph CNC vertical machining center with 23 1/2" x 52" table, (overall travels: X -axis 40", Y axis 20" and Z axis 20"), 30 position ATC, chip blaster high press
Hurco model OEM-50, 460 volt, 3 Ph CNC vertical machining center with 27 1/4" x 66 1/2" table, 20 position ATC, ultramax 3 dual screen CNC control
Kent model KGS-410AHD, 440 volt, 3 Ph, 3 Hp hydraulic surface grinder
Gallmeyer & Livingston Grand Rapids model 450, 440 volt, 3 Ph, 12" x 24" hydraulic surface grinder with incremental down feed
Kent model KGS-410AHD, 440 volt, 3 Ph, 3 Hp hydraulic surface grinder, 15 3/4" x 39 1/2" electromagnetic chuck, over wheel dresser
Lucas model 42B, 220/440 volt, 3 Ph, 20 Hp, 5" table type boring mill with 48" x 86" table, 9 - 1200 RPM
Clausing Kondia model FV-1 variable speed 440 volt, 3 Ph, vertical milling machine with 12" x 48" power feed table and Newall Sapphire 2 axis DRO,
Condor/Calavar model 2035 battery powered scissor lift with 750 lb lift capacity
Raymond model 4-D, 24 volt battery powered fork lift 4000 lb lift capacity 247" max lift height 4" width x 40" height forks
Adige model TT640, 220/440 volt 3Ph saw unit, capacity of O.D. 8mm to 80mm with a max. cutting length configuration of 1500mm - 3000mm - 4500mm with 18' over/ under carriage system.
Tru-Cut #ES-H-500, 220/440 volt, 3 phase, Tube Cutting SystemTube. O.D.: 1" - 3" Tube Wall Thickness:: .03 - .125" (7% of Tube O.D.) Cut Length:: 20" (Using Exit Conveyor) Cut Length w/ Tru-Motion Off
Dake model 6-450, 50 ton hydraulic press.
Daewood propane forklift model G20E-3 type PL mast type FFL tire type S
Bil Jax scissor lift model ESP19 115 volt (working condition unknown)
Daewoo model G20E-3 propane powered ride-on fork lift max lift capacity 4,000 lbs max vertical lift 127" fork dimensions 4" width x 39 1/2" length unit shows 4,920 hours on meter key and propane tank
Yale model GLP040AFNUAF084 propane powered ride-on fork lift with max lift capacity 4,000 lbs max vertical lift 128.7" fork dimensions 4" width x 42" length unit shows 6,906 hours on meter key is incl
Yale model GLP040AFNUAF084 propane powered ride-on fork lift with max lift capacity 4,000 lbs max vertical lift 128.7" fork dimensions 4" width x 42" length unit shows 4,940 hours on meter key is incl
Yale model GP040AFNUAF084 propane powered fork lift with maximum lift capacity 4.000 lbs and maximum vertical lift 129" fork dimensions 4" width x 42" length unit shows to have 2,130 hours on meter ke
Yale propane powered forklift model GLP040AFNUAF084 , visible of rust and dings/dent over all fair condition, solid tires
Crown stand alone fork lift model RC3020-30 model E 36 volt key is included
Crown stand alone fork lift model RC3020-30 model E 36 volt key is included unit appears to be in working order possibly needs to be serviced and/or repaired
Crown stand alone fork lift model RC3020-30 model E 36 volt key is included unit appears to be in working order possibly needs to be serviced and/or repaired
Genie model GS1930 scissor lift very used condition minor dents visible maximum working height 25 ft maximum platform height 19 ft system voltage is 24 volts
Genie model GS1930 scissor lift used condition minor dents visible maximum working height 25 ft maximum platform height 19 ft system voltage is 24 volts
Nissan model PJ02A20PB type LP sit down propane fork lift with a maximum load capacity of 3360# (Working condition unknown, could not test), appears to be in need of repair, hours unknown, unit does n
Nissan model KAPH02A25PB type LP sit down propane fork lift with a maximum load capacity of 4350# (Working condition unknown, could not test), appears to be in need of repair, hours unknown, unit does
Daewoo model G20E-3 4000# load capacity gas powered fork lift (Working condition unknown, could not test), appears to be in need of repair, hours unknown, unit does NOT include key
Yale model GLP040AFNUAF084 approx 4000# capacity propane powered fork lift key not included, unit requires repair, some corrosion noted, forks not included
Nissan model KAPH02A25PV approx 4000# capacity propane powered fork lift hours on unit 6373.8, key not included, some corrosion noted, unit requires repair
John Bean model EHP SYSTEM IV rim clamp tire changer, unit appears to be complete unit and in like NEW condition,
Komatsu Air tire Forklift, Model #FG20-11. Nissan LP gas engine, single speed manual transmission, 42 in. forks, 128 in. lift height, 4000 lbs. capacity, 9344 hours on meter, new tires and recent pai
Acura Seiki model VMC B100B, 50" x 100" CNC vertical bridge mill, 46" x 100" table, 50"; between uprights, 100" X axis, 50" Y axis, 20" Z axis, 27" max. height under spindle, 20 position ATC, Mitsubus
Acura Seiki model VMC B100B, 50" x 100" CNC vertical bridge mill, 46" x 100" table, 50"; between uprights, 100" X axis, 50" Y axis, 20" Z axis, 27" max. height under spindle, 20 position ATC, Mitsubus
Fadal model 8030 CNC vertical machining center with 80" X axis, 30" Y axis, 34" Z axis, travel 30" x 80" table, 40 taper spindle, 21 position ATC, flood coolant, Fadal CNC 88 control (MFG.1992)
Mustang C-32 CNC vertical machining center, 18" x 43" table, 32" X axis, 20" Y axis 24" Z axis, travels cat 40 taper, Vickers/Siemens Acramatic 2100 CNC control with control wand manufactured in 07/20
Ingersoll Rand model 2475N7.5, 230 volt, Single phase, 7.5 Hp industrial 2 stage air compressor with 175 psi maximum pressure and 80 gal. tank.
Hobart commercial meat grinder model MG2032 208 volt 3-phase
True model GDM-72 115 volt single phase retail food display refrigerator
Hussmann model RM-4 120 volt 17 door retail food display refrigerator, comes in 4 parts, left and right end cap units included
Hussmann model RM-4 120 volt 17 door retail food display refrigerator, comes in 4 parts . left and right end cap units included
Corob model TATOCOLORVL 115 volt electric paint mixer at approx 37 1/2" width x 51" height x 24" depth (Working condition unknown, could not test), unit appears to be in need of repair
Webber MT, Model CF-2 plate compactor with a 6Hp. Subaru gas engine
2007 Atlas Copco, model XAS375 T# towable 123 PSIG/375 CFM air compressor. with a 4.5 ltr. Diesel engine, computerized controls, requires 2" ball and 120 hrs on digital meter in Like New Condition
Ingersoll Rand towable 185 CFM air compressor, 1983, JD Diesel with pintle style hitch (runs)
Champion model VR10-12 10 horsepower, 120 gallon vertical tank 460 volts air compressor
1996 International 4700 boom truck, 230 hp DT466 diesel engine, automatic transmisssion, GVW 27,500 lbs. 297,800 miles, 42ft. TECO single man bucket, 2 hyd. outriggers, upper boom has cracks in the fi
Pelton & Crane model 2120 dentistry chair with foot controls, overhead dentist light, delivery systems with touch pad controls, lights, J-boxes, left/right delivery, Kavo Fiber Optics, assistant stati
Pelton & Crane model 1585 dentistry chair with foot controls, overhead dentist light, delivery systems with touch pad controls, lights, J-boxes, left/right delivery.
Coats model 5060AX tire changer, unsure if all parts are present
Yale model GLC0LCNSBE085 propane powered fork lift with 8000 # max. capacity, 185" max. lift height, 6" x 48" forks, 9709 metered hours, hard rubber wheels, (non marking tires on rear)
W.F. Wells model W-9-1A1, 230/460 volt, 3 Ph horizontal band saw with semi-automatic, 8" x 16" capacity, dual vertical column, auto-feed, coolant, 20" x 10' , 6" stock feed table with analog controls
Worthington model BN, 230/460 volt, 3 Ph, air compressor with 20 Hp motor and approx. 80 gal. capacity tank
Comp Air model CL25SS/BP, 460 volt, 3 Ph air compressor with 25 Hp motor, 110 max. PSI. Includes (1) approx. 100 gal. capacity holding tank
Cincinnati Bickford 220/440 volt, 3 Ph radial arm drill with 9" diameter column, 3" arm, 180 to 1500 RPM power down feed spindle, 13" x 18" 24" t-slotted riser table
Bridgeport model VMC760-16, 220/440 volt, vertical machining center with approx. 6000 RPM BT40 spindle, 19" x 39 1/2" table, 16 position automatic tool changer, Bridgeport DX-32 control, full enclosur
Bridgeport 220/440 volt, 3 Ph series 1 vertical milling machine with 2 Hp, 60 to 4200 RPM spindle, 9" x 42" table, 2 axis acu-rite digital read out, setup gear
Bridgeport 220/440 volt, 3 Ph series 1 vertical milling machine with 2 Hp, 60 to 4200 RPM spindle, 9" x 42" table, 2 axis acu-rite digital read out, setup gear, 6" machinist vice
Bridgeport 220/440 volt, 3 Ph vertical milling machine with 1 1/2 Hp, 60 to 4200 RPM spindle, 9" x 32" table, 2 axis acu-rite digital read out, 6" Wilson machinist vice
Yale model SEC030ABN24SE083, 24 volt electric fork lift with 3000 # max. capacity, 190" max. lift height, 4" x 42" forks, side shift, 911 metered hours, hard rubber wheels, (1) GNB model FER100 12-475
Methods model SLANT50, 480 volt, 3 Ph CNC turning center with approx. 3500 RPM spindle with 3 jaw chuck, hydraulic tail stock, 10 position turret, yasnac LX3 CNC control, full enclosure, foot peddle,
Methods model SLANT50, 480 volt, 3 Ph CNC turning center with approx. 3500 RPM spindle with 3 jaw chuck, hydraulic tail stock, 10 position turret, yasnac LX3 CNC control, full enclosure, foot peddle,
Dake model 50-H, H frame press, 50 ton, manual, 12" x 32" adjustable height bed, free standing
Okuma type LS, 480 volt, 3 Ph, geared head engine lathe with 22" swing, 56" center to center, 23 to 1200 RPM, 1 1/2" diameter though head spindle, saddle with tool post, tail stock, chip pan, 3 jaw ch
Hansford Davis model 5, 480 volt, 3 Ph keyseater broach, 20 1/2" x 30 3/4" t-slotted table, single verticle broach, clamps, bat guide, free standing unit.
Shearp model 1760K, 220 volt, 3Ph geared head engine lathe with 17" swing, 60" center to center, 50 to 1800 RPM, 2" diameter through head spindle, saddle with tool post, tail stock, chip pan, back spl
Stoelting model U431-309 208/230 volt 3-phase ice cream maker with lower freezer storage and attached mixer
Middle by Marshall model PS536 208 volt 3-phase stackable conveyor ovens on locking casters with digital temp control
Coats model 5060AX rim clamp tire mounter unit appears to be in fair condition
COMPLETED! Komatsu FG 20c-11 sit down propane forklift 4,000 lb capacity hours unknown
Crown model RC3020-30 approx 2500# capacity 36 volt electric forklift key not included, battery not included, unit has minor damage
Komatsu model FG20C-12W approx 4000# capacity propane powered forklift some corrosion noted, key included, unit has minor damage
Nissan model MPL02A25LV approx 3150# capacity propane powered forklift some corrosion noted, key not included, driver guard requires repair, drivers seat has minor damage
Komatsu model FG 20C 11 approx 4000# capacity propane powered forklift some corrosion
Yale model GLP040AFNUAF084, approx 4000# capacity propane powered forklift some corrosion noted, key and folks not included, drivers seat is damaged
Genie model GS-1930 aerial platform lift maximum height 25 ft maximum platform height 19 ft maximum capacity weight 500 lbs 24 volt batteries included
Hobart model 0300 115 volt single phase mixer, comes with bowl and attachments, unit has minor damage (Working condition unknown)
Hyster model H60XL, 5450 # capacity propane powered fork lift with 177" max. lift height, 5" x 42" forks, side shift attachment, solid rubber tires, 4540 hours on meter (in working condition - has new
Yale model GLP080LJNGBE089, 7600 # capacity, propane powered fork lift with 185" max. lift height, 5" x 48" forks on rotating carriage, solid rubber tires, (hours on meter unknown)
Hyster model H80XM, 8000 # capacity propane powered fork lift with 173" max. lift height, 5" x 47" forks on rotating carriage, solid rubber tires, (hours on meter unknown)
Mercier-Freres model MSX-6, 480 volt, 3 Ph splitter with dust collector
Scimatic model MSX-6 & Mercieer splitter station both with 3 Ph electrical motor
Crown upright forklift RC3000 series truck type A.
Crown model RC3020-30 approx 3000# capacity 36 volt rechargeable stand up fork truck hours on unit 7188.4, unit works
Komatsu, Model FG205HT, 5830 lb capacity propane powered fork lift, with 3 stage mast (183" max lift height) side shift, hard rubber tires,
Komatsu, Model FG15ST15, 3480 lb capacity propane powered fork lift, with 3 stage mast (188" max lift height) side shift, hard rubber tires, 10375 hours on meter, in running condition.
Komatsu, Model 15ST15, 3000 lb capacity propane powered fork lift, with 3 stage mast (170" max lift height) side shift, hard rubber tires, 1356 hours on meter, in running condition.
Cumberland, model B-29, 3 knife, open rotor, 100 hp. Granulator
ERMAFA model E2.125 GI co-rotating, extruder with Keller model E2.12+24-0 transmission, VEM 750 Hp, 440 volt DC drive motor, transformer and control panels, barrels and spare parts
Sterko 35 ton chiller unit with outside heat exchanger unit.
Cumberland B-37, 3 knife open rotor, 150 Hp granulator with 21" x 36" shroud
Cumberland model 37-B, 5 knife, staggered bed, open rotor granulator or cutting chamber.
COMPLETED! Cumberland model B-24, 18" x 24", 3 knife open rotor granulator
Hobart model 6614, 200/230 volt 3 Ph commercial meat bandsaw, saw blade is not included
Komatsu model FG200-11, propane powered 4,000 lb. capacity fork lift with maximum vertical lift height of 128" and fork dimensions of 4" x 42" length, unit has 9,341 hours on meter
Hyster model H40XMS approx. 4000 # capacity propane powered fork lift
Champion model VR10-12 460 volt 3 phase air compressor with tank and (1) Champion model 35CNDA100 compressed air conditioner
1994 International 2 WD auger truck (digger) with a Altec boom, diesel engine, manual transmission, 5853 hours on hour meter, 105301 miles on 6 digit odometer, AM/FM stereo, rear dully's, Chelsea P.T.
2000 Ford F-550 XL Super duty boom truck with automatic transmission, Triton V 10 engine, extendo mirrors, AM/FM digital stereo, 12 volt accessory power supply, driver and passenger side air bags, rea
1996 MEC model 1632, 24 volt electric scissor lift, 16' max. platform height, max. lift capacity 500 #'s, non-marking hard rubber tires, 40" extendable platform,
Case model 560 diesel trencher with a model D-125 hydraulic front 16" bucket, 6' straight blade mounted to front with individual controls, 4' chain trenching attachment with individual controls, 4 whe
Case 860 turbo cable plow diesel engine, 4 wheel independent steering, front reel carrier, 575 hours on 4 digit meter
Yale model ERC060RGN36TE084, 36 volt, 6000 # max. capacity electric fork lift with 187" max. lift height, 4" x 48" forks, solid rubber tires, 4755 hours on meter, (in running condition) Exide Workhog
Bliss model C-75 OBI press, 75 ton capacity, 24" x 36" bed, 18 1/2" x 29" ram, 3 1/2" slide adjustment, 6" stroke, 15 1/2" shut height, air clutch, air brake, (No press control, NOT in service) includ
Kent model 10-135-PMA strip welder, 10" max. width sliding tig torch head, various speed control, Lincoln precision tig 225 power source all mounted on portable car
2000 Southerland model FTP-110 gap frame press (110 ton capacity), 1880 mm x 700 mm bed, 1360 mm x 56 mm ram, 90 mm slide adjustment, 180 mm stroke, 400 mm shut height, 35 - 65 strokes/min; air clutch
Minster, model 4, OBI Press 32 ton , with 16" x 24" bed, 13" x 20" ram, 2.25" slide adjustment, 2" stroke, 12 shut height, 100 strokes per minute, air clutch, air brake, Minster press control, palm bu
1983 Ardcor model S10-2-10 roll form mill, with 2" diameter, spindles, 9-stand on 10" centers, 15 hp. Main drive motor, 10" center to center auto guard control, and coolant container. Includes (1) mo
Minster, model 5, 45 ton capacity, Gap Frame Press, with 18" x 28" bed, 14" x 24" ram, 2.50" slide adjustment, 4" stroke, 12" shut height, 9 strokes per minute, air clutch, air brake, Minster press co
1963 Bliss model C-45 OBI Press, 45 ton capacity, 19 1/2" x 29 1/2" bed, 16" x 26" ram, 3" slide adjustment, 6" stroke, 17 1/4" shut height, air clutch, air brake, 14" max width servo driven feeder, C
1983 Grob model 4V-18 vertical band saw with 18" throat, 10" max thickness, 24" x 28" tilt table, built in blade welder/grinder
Sutherland model FCP-60H, 60 ton capacity, Gap Frame Press, (bolster area is 900 c 520 mm. Die height is 270 mm.) 55-110 S.P.M, 10 x 4 hp main motor, 70mm slide adjustment, with a AMS model XL100 seri
Econopak model 12CRS, 3000 Lb. capacity, coil machine, 52" max coil diameter, Mandrel expansion range = 25 1/2" - 20 1/2" STK width = 12", Feed length = 999.999", power supply is 110 volt.
Johnson model 5-FW-AC OBI press, 56 ton capacity, 19" x 29 1/2" bed, 12" x 12" ram, 3" slide adjustment, 4" stroke, air clutch, air brake, servomatic 12" max width servo driven feeder, Jobber Plus pre
Willis model 618 hand feed surface grinder 6" x 18" travels, 3450 RPM spindle, 6" x 18" magnetic chuck
1968 Bliss model C-35 OBI press, 35 tom capacity, 17" x 26 1/2" bed, 9" x 12 1/2" Ram, 2 1/2" slide adjustment, 2" stroke, 1 1/4" shut height, air clutch, air brake and floor mounted jobber plus press
Entron model EN1000 microprocessor based welding control unit with 2 hand safety finger controls
LeROI CompAir model CL30SSAH, 100 PSI, air compressor unit, includes approx. 100 gal. holding tank.
Kobelco model KA50E, 480 volt, 3Ph, 50 Hp rotary screw air compressor, includes (1) approx. 200 gal. holding tank and (4) approx. 20' lengths of pipe with shut off valves and rubber hose.
Coats tire changer, 5060AX
Hobart commercial meat saw, model 5801, 120/230 volt, 3-phase, fair condition
Hussmann refrigerator/freezer unit, model ES1-8U, 120 volt, 99" width x 47" depth x 53" height, fair condition
Hussmann refrigerator/freezer unit, model ES1-8U, 120 volt, 99" width x 47" depth x 53" height, fair condition
Hussmann refrigerator/freezer unit, model ES1-8U, 120 volt, 99" width x 47" depth x 53" height, fair condition
Stoelting model SF144-38I 230 volt single phase frozen drink dispenser
Komatsu model FG20C-12W approx 4000# capacity propane powered forklift, unit has some corrosion, unit powers on
Progressive model PRA-100-18, 460 volt, 3 Ph, 100 KVA resistance welding machine with 18" throat and 8" gap
Progressive model 602ES4, 440 volt, 3 Ph, 150 KVA resistance welding machine, with 18" throat and 8" gap (max. welding force at 80 PSI, obtainable on this machine is 4000 #'s)
Taylor Winfield model ERC-12, 440 volt, 3 Ph, 150 KVA resistance welding machine
Taylor Winfield model PROJ, 440 volt, 3 Ph, 150 KVA resistance welding machine
Clark model C500-40, 4000 # capacity propane powered fork lift with 130" max. lift height, 5" x 42" forks, 9404 hours on meter, non-marking solid rubber tires
Lamson Corporation 480 volt, 3 Ph 10,000 CFH exothermic generator with control panel that includes variable pump controls, fan controls and alarm, main disconnect, all pump motors, water pipe, chiller
McQuay model AFCO 63 N27, 460 volt, 3 Ph air cooled fluid cooler, (previously run on ethylene glycol) total DIMS: 183" width x 42" height x 88" depth
Woodmaster Model 3820 Dual Drum Sander, 230 Volt, Single Phase
Delta 5-Speed Shaper, Model RS-15, with Roller Feeder, 230/460 Volts, 3-Phase Motor
Daewoo model G20E-3, propane powered 4000 lb. capacity fork lift with max. vertical floor height of 173", fork dimensions of 4" width x 39" height unit has 5,446 hours on meter
True Manufacturing Company refrigerator unit, model GDM-72F, 1-phase, 115/208/230 volt, 78" width x 30" depth x 79" height, fair condition
Hobart, model 6614, 200/230 volt 3 Ph stainless steel commercial food preparing meat saw with 3 HP motor
Hobart mixer/grinder, model 4346, 200 volt, 3 phase, in good condition, 31" width x 53" height x 25" depth, (working condition unknown, unable to test)
Bizerba, model SE12 D, 120 volt 1 Ph commercial meat slicer (unit appears to be in good condition)
Stoelting model U431-309, 208/230 volt commercial ice cream and smoothie machine with lower cooler
Hobart model 5801, 200/230 volt commercial meat saw
Mitsubishi model FGC30, 6000 # capacity propane powered fork lift with 6" x 60" forks, 130" max. lift height, 1296 hours on meter, solid rubber non-marking tires,
Quickwood type D2, 220/440 volt, 3 Ph, Finishing brush sander. includes (1) 10? long x 33" width, (1) 4' long x 20" width and (1) 5' long x 43" width section of roller conveyor
Komatsu model FG20C-12W approx. 4000 # capacity propane powdered fork lift with 128" max. lift height and (2) 4" x 42" forks
Daewoo model G20E approx. 4000 # capacity propane powered ride on fork lift with 173" max. lift height, 4" x 42" length forks
Champion model VR10-12, 460 volt, 3 Ph, 127 gal. Air compressor, 4378.7hours on meter,
HYSTER 6,000 lb. capacity fork lift, model # S60XL, triple stage mast with side shift, LP gas, battery draws down,needs jump started..
Geka Hydracrop-100-S combination 3 hole punch press/24" press brake/notching press, can cut a 6" x 6" x 1/2" 90 degree piece of angle iron or a 24" x 5/8" piece of flat stock, 2" piece of bar stock, 2
Lincoln Electric Powerwave 455 welder,(appears to be wired 480 volt, 3 Ph) along with (1) Lincoln Electric power feed unit, (voltage unknown) includes (1) 24" width x 42" height x 37 1/2" depth steel
Marvel model 81/5 heavy duty industrial band saw with incremental tilt, hydraulic clamps, 1 1/2" blade, (1) 60" long x 39 1/2" height x 30" depth section of heavy duty steel roller conveyor and (1) 45
Franklin Manufacturing Inc. model W5100X18, 100 ton hydraulic punch press (stroke: 2.00", max. hole diameter: 1.50", max. material thickness: 1.0") includes various sized punches, (1) 98" width x 39 1
W.A. Whitney Corp. model 822-920, 45 ton capacity hydraulic angle shear, (pump is wired 480 volt, 3 Ph, 10 Hp) includes ALL heavy duty roller conveyor
Lincoln Electric Powerwave 455 welder (appears to be wired 480 volt, 3 Ph) along with (1) Lincoln Electric power feed unit, S/N U1020334184 (voltage unknown) Also includes custom fabricated 26" width
Bigg model 2-CNC, 480 volt, 3 Ph, CNC pipe bender with 4 various sized heads (1 1/4" - 130 degree, 2" - 130 degree, 1 1/4" - 90 degree, 1/2" - 90 degree) unit has a Ercolina top-bender microprocessor
Vicon Model 8000 HVAC Plasma Cutting System, 5 x 10' cutting area, 28 gauge to 1/2 in. thick plate material capacity, DIMS: 144" length x 90" width x 35" height along with (1) Hypertherm Powermax 1000
Chicago Steel model 204, size W31, manual bending brake
Caterpillar model 150B, 5000 # capacity, 106" lifting height, propane powered fork lift with side shift and 4 x 48" forks
Roto-Die model 10 hydraulic bender, DIMS: 140" width x 48" depth (works)
Yale sit-down ride on forklift, model GLP040AFNUAF084, propane forklift, capacity 4,000#, does not include lp tank, fork height 129"
Yale model GLP040SVXNUSF084 propane powder fork lift, 4000 # lift capacity, 126" lift height, 4 x 42" forks, single stage mast, side shift
Lincoln Impinger model 11332-00-U-K1841 stainless steel oven with 19" conveyor
Coats model 5060AX commercial tire changer, no other information available
Hobart model D300T, 115 volt, 10.2 amp, 3/4 Hp commercial food mixer with 3 attachments
Devlig, model 3H-72 Jigmil (Manual Machine tool, mill-drill, tap, bore) X travel = 72", Y travel = 48", Z travel = 16" (35" x 72" platen runs in and out (2 squared)16" in/out does not include angles o
Terex model TA30N, (Marklift CH30KBN) 48 volt man lift with extendable boom, solid rubber tires and a 120/220 volt input built in battery charger (needs New batteries) (max. work load including occupa
Schaeff model W55WSF186TS0, 5500 # capacity, 36 volt electric stand up fork lift with 5 x 48" forks, 186" max. lift height, built in digital scale, side shifter (hours on meter unknown) includes Hobar
Hyster model RC150, 15,000 # capacity propane powered fork lift with 2 stage mast, 6 x 46" forks, pneumatic dual front tires, 13 hours shown on meter (not actual reading), and (1) extra fuel tank (uni
WFWells model W-9, portable horizontal band saw with a 9" x 12" capacity, coolant (unit is wired for 440 volt 3 phase)
1997 Kaeser model AS44 air compressor (rotary screw type) 40 horsepower, sigma profile controls, fuel enclosure
1998 Hyster model S50XM propane power fork lift with a 4950# max lift capacity, 189" max lift height, 4" x 42" forks, side shifter, solid tires (hours unknown)
Fadal model 5020A vertical machining center with a 15 horsepower motor, 10000 rpm CAT 40 spindle, 20" x 56" T-slotted table, 50" x 20" x 20" XYZ travels, Fadal CNC 32MP controller, 24 position automat
Fadal model 4525-922-1 vertical machining center with a 15 horsepower motor, 10000 rpm spindle, 25" x 54" T-slotted table, 45" x 25" x 24" XYZ travels, Fadal CNC 32MP controller, 24 position automatic
Fadal model 4020A-917-1 vertical machining center with a 10 horsepower motor, 7,500 rpm CAT 40 spindle, 20" x 49" T-slotted table, 40" x 20" x 20" XYZ travels, Fadal CNC 32MP controller, 21 position a
EW Bliss model C-60 60 ton OBI press with a 21" x 32" bed, 12' x 17" ram, 4" stroke, 3" slide adjust, 14" max shut height, electric clutch, electric break, palm buttons and bliss press control manufa
Elumatec model SA142-36 18" diameter cold saw, 30" max feed length semi automatic operation, pneumatic clamping, full enclosure, 12" x 60" elevator roller conveyor , manufactured 2001
Brother model TC-32B QT CNC tapping center, 10 horsepower motor, 16000 rpm CAT 30 spindle, 2 position rotary table with 18" x 24" tables, 21" x 15" x 16" XYZ travels, comes with a Brother CNC controll
Burr King model 45-106 4.5 cubic ft. vibratory finishing machine with a 16" x 18" x 36" top loaded vibratory hopper and end discharge
DoAll model C-916M, 480 volt, 3 Ph horizontal band saw with 159" band length (in working condition) along with (1) 10' long x 29" height x 21 1/2" depth roller conveyor stand with 8" clamp and model C
Miller Syncrowave 350 constant current AC/DC Tig welder with cart (input 200/230/460 volt, 1 Ph
Cincinnati model 1810 shear (capacity 1/4" x 10' mild steel) wired 220/440 volt, 3 Ph
Case 580 B Diesel Loader, With Backhoe. Starts & Runs. 1355 Metered Hours
Busy-Beaver Model 175 Chipper, Kohler Engine, 2" ball
John Deere 710B 1-Yard Backhoe/Loader, (2) New Batteries,
Nissan LP Fork Lift, model: KCPH02A25PB auto trans, non-marking hard tires, 3 stage mast, 187" max lift height, side shift, 4,711 metered hours, 40" forks, 4,400 lb capacity at 24" load center
2000 ATLAS COPCO air compressor, model: GA18, 25hp, 103.9cfm, 132psi, comes with great lakes air dryer and air tank
Caterpillar, propane fork lift, Model:T50B, serial: 12V1965, 3-stage mast, 5000 pound lift capacity at 24" load center, hour meter reads 2,809,
ACCUSHEAR hydraulic sheer, Model: 625012, Date code 7 04, 460 volts, 3 phaze, 20hp, Approx dimensions: 14' x 90" x 7' tall, capacity thickness .250, cut length 12, oil press 3500, min clearance .002,
ACCUPRESS hydro-mechanical press brake, Model:7017515, 480 volt, 175 ton, bed length 12', control volt 120, hyd, oil pressure 3800, date of manufacturing 0704, 3 phaze, Approx: 178" long x 60" wide x
HYD-MECH vertical tilt frame band saw, Model:V18,
Spartan Iron Worker, Mod: IW66DSPARTAN, s/n: IW66D-246,460 volt, 3 phaze
Hepertherm Power Max 1000, G3 series plasma cutter, 200/480 volt, 3 phaze
Euromac Variable Angle Notcher, Model:AV220-6
JET, Vertical milling machine, MOD: JVM-836-3,
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included,
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Parker Parflange model 1040, 440 volt, 3 Ph flanging
Nachi Fujikoshi EVHED 244230 Tempering furnace:Furnace Specs:Load: 500 Kg @ 700 C, +/- 5 CLoad size: 600 MM wide x 1050 MM long x 750 MM high680 L/min water cooling requiredvacuum purge, nitrogen flow
Nachi Fujikoshi model EHB 3VCHardening furnace (vacuum purge system) Furnace Specs: 1350 C max tempLoad rating: 75 KG @ 1250 C, 150 KG @ 1050CLoad size: 450 mm wide x 450 mm high x 600 mm longHot zone
Mitsubishi model DWC110HA, Wire EDM includes a Dia-trans 402/201 volt, 21.5/43.1 amp transforme
Mitsubishi model DWC90H wire EDM, includes model HE-UV300-01 unit cooler and Dia-trans 402/201 volt, 21.5/43.1 amp transformer
Okuma model LH35-N CNC, flatbed lathe with Okuma model OSP-U100L controls (24" swing, 10' between centers, chip conveyor, twin turret, steady rest and 4 1/2" spindle hole) wired 22/440 volt, 3 Ph
Okuma model LH35-N CNC, 3 Ph flatbed lathe with Okuma model OSP-5020L controls (24" swing, 10' between centers, chip conveyor, twin turret, 3 steady rests and 4 1/2" spindle hole) wired 22/440 volt, 3
Okuma model LH35-N CNC, flatbed lathe with Okuma model OSP-7000L controls (24" swing, 10' between centers, chip conveyor, twin turret, 3 steady rests and 4 1/2" spindle hole) 220/440 volt 3 phase
Ridgid model 802, 115 volt, portable threading machine with forward and reverse and (8) various threading heads sized from 1/8" to 2"
Ridgid model 300, 1220 volt pipe threader with steel roller attached and tristand along with (1) Ridgid adjustable height tripod with rollers.
Atlas Copco model G37PLUS, 50 Hp air compressor,
Atlas Copco model G37PLUS, 50 Hp air compressor,
Lincoln Electric Square Wave Tig-350, AC/DC tig and stick arc welder with custom fabricated cabinet full of misc. welding rod (208/230/460 volt, 1 Ph input, 350 amp AC/DC, 40 percent duty cycle at 34
Magnaflux model GD-96 magnetic particle inspection machine with a 10' long x 30" depth bed (capacity 15" diameter x 8' long) includes cabinet and all controls
Upton model BCG-2517 gas fired furnace (max. temperature 1350 degrees F, 1000000 BTU) Interior DIMS: 14' long x 4' width x 36" height with 72" long x 29" width chain driven carrier and wheel conveyor
Upton model BCG-2517 gas fired furnace (max. temperature 1350 degrees F, 1000000 BTU) Interior DIMS: 14' long x 4' width x 36" height with 72" long x 29" width chain driven carrier and wheel conveyor
TCM model FCG25N6T propane powered 4600 # capacity fork lift with 4 x 48" forks, solid rubber tires, 189" max. lift height, 19041 hours on meter,
Simon Silver-Eagle model 32/21DF, propane/gas powered man lift (500 # max. capacity platform load) with 5' width x 30" depth steel platform, 38' max. working height, approx. 16' max. boom extension, 2
Bryant 48" tall (220 volt, 3 Ph) center hole grinder with 115 volt controls
Jones Lamson classic 130 optical comparator coordinate measuring machine with Quadra-chek 200 read out unit with tail stocks and Novalite projection unit
Heald model 361 rotary grinder with a 31" diameter magnetic chuck incremental down feed, overhead light, coolant pump, 15 Hp spindle motor (wired 440 volt, 3 Ph)
Monarch model 610 (1610 x 54), wired 460 volt, 3 Ph engine lathe with 16" swing, 12" 3 jaw chuck, attached cutting tool on rotary base, 80" long bed, steady rest, various chuck attachments, chip tray
Monarch model 62 (1610T x 30), wired 460 volt, 3 Ph lathe with Futaba Pulscale XY axis read out, 12" diameter 3 jaw chuck, approx. 60" bed, 36" travel, chip tray, coolant pump, overhead light, various
Warner & Swasey 2A model M-3470, wired 460 volt, 3 Ph, saddle type turrett lathe with 5" spindle hole, 15" 3 jaw chuck with power wrenching, chip tray, various tooling includes (1) 72" width x 32" he
Marvel series 15A heavy duty industrial horizontal band saw with 30" adjustable width capacity with height selector controls, hydraulic clamps additional 10' long x 25" width roller table and Marvel m
Okuma model LB25, wired 440 volt, 3 Ph, CNC lathe slant bed with tail stock, Turbo model 6475-8390 chip conveyor 12" 3 jaw hydraulic chuck, Okuma controls,
OKK model V-1, 5 axis machining center with 12 station automatic tool changer, chip conveyor, Nikken 5th axis tilting rotary table and Mitsubishi controls includes (1) 60" width x 35 1/2" height x 30"
Mitsubishi model DWC110H wire type EDM machine with Mitsubishi controls and a type DWC-110 electrical discharge machine includes pumps and coolers and hand held remote
Nachi Redring model SF900, wired 460 volt, 3 Ph, gear grinder (incomplete - some parts missing) with Allen-Bradley 8600 CNC controls
Nachi Redring model SF900, wired 460 volt, 3 Ph, gear grinder with Allen-Bradley 8600 CNC controls,
Ryerson/Chicago model PB-8135, 440 volt, 3 Ph, 96" brake with electronic controls
DoAll model 1612-3, 220 volt, 3 Ph heavy duty band saw with a 30 1/2" x 24" table, 125" max. band length, 3/4" blade and attached DoAll model DBW-8, 220 volt band welder and grinder
Devlieg/Spiramatic Jigmil model 3H-48 with a 440 volt, 3 Ph AC motor, Futaba Pulscale CMA unit
Kearney & Trecker/Milwaukee model 630/TF-20 horizontal mill with a 12" diameter 3 jaw chuck, 106" width x 20" depth bed (20,000 amp capacity, wired 220 volt, 3 Ph), Over-Arm Arbor and Arbor Supports
Peck, Stow & Wicox Co. (PEXTO) model 10-U-8, 8' width shear (capacity 10 gauge soft steel, believed to be wired 440 volt, 3 Ph)
Howa Sangyo type 1000, 440 volt, 3Ph, lathe with (2) 5" steady rests, approx. 48" travel, 9" 3 jaw chuck, coolant pump, chip tray, attached precision cutting tool and steel guards
Stoelting, 208/230 volt 3 Ph, commercial ice cream machine, and refrigeration unit, model U431-309
Genie, GS1930, high lift scissor lift, voltage unknown, maximum lift height of 19 feet, platform capacity retracted 500 lb., platform extended capacity 250 lbs.
Stoelting model SF144-38I, 230 volt, 1 Ph frozen drink dispenser
Weka type DK22, 110 volt core drill with portable stand and (2) used core bits (1 - 7 in. diameter and 1 - 3 in. diameter)
Mayville scissor lift model: MEC 2548HT 36 volt, hours unknown, capactiy 850, lift 24', deck approx. 8'x4
2008 John Deere 320 Skid Steer, Power Tatch, New 12 x 16.5 Tires, 2000lbs Rated Operating Capacity. 4-Cylinder John Deere Turbo Diesel Engine, 3045.3 Metered Hours, No Bucket
Case W24, Rubber Tire Loader, Approx. 2-Years Old, Case Diesel Motor, No Brakes, Newer Paint, Runs, Fender, rust through, 40-50% Rubber, the Tires are Weather Checked
Hyster Forklift, Model #H110XL 11,000 lb. Capacity, New Dual Air Tires, Heated Cab, Gasoline, Lifts 197", 3-Stage, 48" Forks with Side Shift, 8855 Metered Hours, cracked windshield
JLC Scissors Lift, Model 2032E 20' Platform Heigh
JLG Scissor Lift Model #3246 E232' Platform Height, 2' Extension, Runs and Operates
JLG Scissor Lift Model#2646 E2 26' Platform Height, 2' Extension, Runs and Operates
Skytrak 6036 Extenda Boom Forklift, Diesel, 3-Speed Trans., 4x4, New Tires, Paint has Been Torched Up, 48" Forks, 5' Wide Carriage
MEC 33RT Scissors Lift33" Platform, Gas, 4x4, Hydraulic Outriggers, 12 Volt, No Brakes, 2302 Metered
COMPLETED! Case Model 1845C Skid Steer Uni-Loader with diesel engine, S/N: JAF0295626. 4 X 36 in. forks, 4009 hours on meter, hydraulic coupler control and headlights
2001 Bobcat, 773 skid steer loader, 4201 metered hours, EROPS, diesel engine, hydraulic remote, 31 X 15.5-15 tires
Bobcat model 743-2 skid steer with diesel engine, 60" bucket, size 10-16.5 tubeless pneumatic tires, 3205 hours on meter, 1300 # rated operated capacity (runs but needs new battery)
Harlo model HP5000 CUMMINS diesel powered 4 x 4 fork lift with 5000 # max. lift capacity, approx. 144" max. lift height, (4) 4" x 48" forks, 964 hours on meter
TCM model FG20, 3750 # capacity propane powered fork lift with 130" max. lift height, (4) 4" x 42" forks, 171 hours showing on meter, solid rubber tires, side shift attachment (in running condition,
222
Leroi Dresser COMPRESSOR, APPROX 1227 HOURS, 1990, MFG: , MDL: 185.
1999 STUART STEVENSON ROTARY SNOW BLOWER, MDL RA280 HC-60, MTD ON A 950F CATERPILLAR; DETROIT 40 SERIES ENGINE HYDROSTATICALLY DRIVEN, HAS NEW HYDRAULIC HOSES, SEAT; COMES W/EXTRA CUTTING EDGES & GEAR
SHRED TECH ST 20 SHREDDER
BANDSAW, MFG HOBART, MDL 5700, USED IN CUTTING MEATS (PRIMALS). SAW WAS NEVER USED AND IS STILL IN FACTORY CRATING. SAW REQUIRES 3-PHASE POWER,
FORKLIFT, 4,000 LBS, MFG. YALE MATERIALS HANDLING CORP., MDL N543686, PROPANE, 4 CYL, TYPE LP, TILT 5 DEG., SIDE SHIFT, SOLID TIRES, DIM: 126"L X 40"W X 83"H, HOUR METER READS 12859.4; EST. WT. 7196
TUGGER WINCH, MFG. SEA-MAC MARINE PRODUCTS, AFT, STEEL, RATED LOAD 6,000 LBS., WIRED FOR 460V, 3 PH, O/A DIM: 51"W X 40"D X 49"H, 1 EA; EST. WT 1501 LBS. (470496-0133-10; (10) 09-188-01B, OS2) REPAIRS
METAL SHEAR, MFR NIAGARA, NO.1 R-8 SHEAR, CAPACITY 10 GUAGE MILD STEEL. USED/MAY REQUIRE REPAIRS
HEAT TREATING FURNACE, MFR ESC FURNACE CO., MDL 2BHAF/AF 101024 1177, 30 KW, 230 V, 60 HZ, MAX HI TEMP 2150 DEGREES FAHRENHEIT, MAX LOW TEMP 1250 DEGREES FAHRENHEIT. DATE OF MFR DEC 1982. WORKING DIM
SHEARING MACHINE, BAR, ANG, MANF: BUFFALO FORGE CO, MODEL: 1-2, OTHER PARTS MAY BE BROKEN OR MISSING FROM WHAT IS LISTED IN THE ITEM DESCRIPTION.
FORKLIFT, MAKE: HYSTER, MODEL: H100F AF 48, MANUFACTURED-9/80, 33,700 LBS. DIESEL, BATTERY DEAD, MULTIPLE HYDRAULIC LEAKS, ENGINE OVER HEATS, BRAKES DON'T WORK
LATHE, MFG:MORI SEIKI, MDL:SL-1A, SN:186. (1 EA); -USED
CLARK FORKLIFT (3,000 LBS). YEAR: UNKNOWN
CATERPILLAR WHEEL MOUNTED GENERATOR MODEL # D320, REPAIRS REQUIRED
GENERATOR, WHEEL MOUNTED, 1 EACH, MFG CATERPILLAR, MODEL # D320, REPAIRS REQUIRED
CRANE, LIFTING, SELF PEROPELLED, HYD/OP OVER 10 TONS, MFG: DROTT, WAS OPERABLE WHEN TAKEN OUT OF SERVICE,REPAIRS REQUIRED BUT NOT LIMITED TO TRANSMISSION SLIPS AND BOOM FUNCTIONS INTERMITTENTLY,REQUIR
GENERATOR, ELECTRIC, 101-200 KW OUTPUT, MFG: GENERAL, SN:GEN651884, WHITE ENGINE,
GENERATING UNIT, 750 KW, MFR: A.G. SCHOONMAKER,NEW AIR STARTER, V12 ENGINE, MFR: ELECTRIC MOTIVE DIVISION,, MDL#12-567-E, GENERATOR HEAD: MFR: ELECTRIC PRODUCT, TYPE-L10610, 750 KW, 60HZ, 720 RPM, VOL
GENERATOR, DIESEL, 582 KW, EST HRS: 1,919, TRAILER MOUNTED, STOUGHTON TRAILERS INC., YEAR: 1992, VIN 1DW1A4525PS819601, APPROXIMATE DIMS: 489"X96"X169", (BC: 1267842). (58742270360005) REPAIRS REQUIR
STEAM BOILER (1 EACH),MFR BY SUPERIOR BOILER WORKS,INC, MODEL:4-5-4005, SERIAL NUMBER:15415, HEATING SURFACE:4025 SQUARE FEET, DESING PRESS: 150PSI, STEAM CAPACITY:27600LBS PER HOUR, MIN VALVE CAPACIT
DEHYDRATOR MFR BARON & ASSOCIATES, HIGH VACUUM OIL PURIFIER AND TRANSFORMER DRY-OUT SYSTEM, MODEL: BA-D-HV-1200, SERIAL NUMBER: 861126, 240 VOLT, 3 PHASE, 60 HZ, FULL VACUUM TO 25 PSI MAX, UNIT IS IN
1993 CONDOR LOW BADGER MANLIFT,SERIAL NUMBER: 1S9BAECN7PF391009,100 FOOT INSULATED ELBOW MANLIFT ON A 6 X 6 CHASIS,LENGTH OF RIG IS 410 INCHES,HAS 3 AXLES,6 WHEELS,ENGINE IS A CUMMINGS DIESEL 370HP,13
CATERPILLAR DIESEL GENERATOR SET, 700KW, MDL SR4, EST 66 HRS
LATHE, MFG:MORI SEIKI, MDL:SL-1A
J V MANUFACTURING DP30 INDUSTRIAL BAILING PRESS. (3671020116001A) WAS IN WORKING ORDER WHEN REMOVED FROM SERVICE. OPERATES ON 3 PHASE ELECTRICAL SERVICE
Cincinnati Sidewinder U5 5 Sided CNC Bridge Type Mill with Acramatic A950MC Control. This machine is a single spindle, numerically controlled, 5-sided, bridge mill that features a 5 axis Contouring He
AIR PURIFICATION EQUIPMENT, MANUF : MUNTERS CORP. MODEL: ICA-3000-100
AIR PURIFICATION EQUIPMENT, MANUF : MUNTERS CORP. MODEL: ICA-3000-100
PETTIBONE NI6000-RTL, ,
FORK LIFT, MFG:YALE, MDL:GC030CDNUAE083, 3000# CAPACITY, SOLID TIRE, 157" REACH, SIDE SHIFT, NO KEY, APPROX 2009 HOURS, GASOLINE POWERED, (1 EA): **PARTS MAY BE MISSING AND REPAIRS MAY BE REQUIRED.**
FORKLIFT, MFG:HYSTER, MDL:H60-XL-MIL, INCLUDES ISUZU DIESEL ENGINE, 6000# LIFTING CAPACITY, PNEUMATIC DOUBLE TIRES, APPROX:4316 HOURS, NO KEY, (1 EA); -USED
AIR CONDITION UNITS, MFG: GRAINGER, "Porta a Cool" MDL:PAC2K481S, EES:62754, 62757, (2 EA); -USED
1 EA ONAN PROPANE ENGINE, 15 KW. SINGLE PHASE, MANF & MAKE: ONAN 15.OJC-3CR/1564, MODEL: 15.OJC-3CR/15645AA
1 EA ONAN PROPANE ENGINE, 15 KW. SINGLE PHASE, MANF & MAKE: ONAN 15.OJC-3CR/1564, MODEL: 15.OJC-3CR/15645AA
DRILL, MACHINE GUN (1 EACH), MFR ELDORADO, MODEL: M50-10411, (NO SPECIAL TOOLING IS AVAILABLE FOR THIS ITEM
AIR COMPRESSOR (1 EACH), ROTARY, MFR DAVEY COMPRESSOR CORP, MODEL: 19M250, (HOUR METER READS 13 HOURS), 250 CUBIC FEET PER MINUTE AT 100 POUNDS PER SQUARE INCH
GENERATOR (1 EACH), MFR MARATHON, MODEL: MET012A, 750 KW, 60 HZ, 937 KVA, 240/260 VOLTS, 130 AMPS, CUMMING ENGINE, (CONTROL PANEL MISSING, GENERATOR SECTION IS BURNED OUT, MOTOR MAY BE OPERATIONAL
SWEEPER (1 EACH), MFR TENNANT, MODEL: 528, 3300LBS , MOTOR IS A 3CYL KUBOTA DIESEL, ENGINE MODEL: D1402, (HAS AN ESTIMATED 1151 HOURS), (CONDITION USED, MOTOR RUNS
SWEEPER (1 EACH), MFR TENNANT, MODEL: 7400, CARBORATED FORD 4CYL, INDER INDUSTRIAL ENGINE, (CONDITION USED, LOOKS COMPLETE, MOTOR RUNS
FORKLIFT, 6000 LB CAPACITY, APPRX 3512 HOURS, MFG HYSTER
JV MEDICAL MODEL# JV240BX PACKAGING MACHINE
FORKLIFT, 15,000 LB CAPACITY, DIESEL MOTOR, WIGGINS. (REPAIRS REQUIRED, STEERING PROBLEMS
28 VOLT GENERATOR, MANF: HOBART, THIS AUCTION ITEM MAY BE MISSING PARTS AND IT IS UNKNOWN OF ITS OPERATING CONDITION
DIESEL GENERATOR SET, MODEL: MEP 004A, 15 KW, 60 HZ, THIS AUCTION ITEM MAY BE MISSING PARTS AND IT IS UNKNOWN OF ITS OPERATING CONDITION, NO MAINTENANCE RECORDS AVAILABLE
DIESEL GENERATOR SET, MODEL: MEP 005A, 30 KW, 60 HZ, THIS AUCTION ITEM MAY BE MISSING PARTS AND IT IS UNKNOWN OF ITS OPERATING CONDITION
DIESEL GENERATOR SET, MODEL: MEP 005A, 30 KW, 60 HZ, FUEL PUMP BAD, THIS AUCTION ITEM MAY BE MISSING PARTS AND IT IS UNKNOWN OF ITS OPERATING CONDITION, NO MAINTENANCE RECORDS AVAILABLE
WIGGINS W156Y, 2925 HOURS, 15 TON FORKLIFT, REPAIRS REQUIRED INCLUDING BUT NOT LIMITED TO: ENGINE HAS A THROWN ROD
GENERATOR/AC SYNCHRONOUS, 500 KV, MFG. O&M, MAGNA ONE MDL 600D343, 3 PH, 60HZ, FRAME 680, 1800 RPM, CUMMINS DIESEL ENGINE, HEAT TRANSFER SYSTEM MDL 6876 , 1 EA. REPAIRS NEEDED: BLOWN MOTOR
1978 CRANE, MFG. DROTT, OVER 10 TONS, LIFTING, SELF-PROPELLED, HYD/OP, THE RIGHT FRONT OUTRIGGER IS INOPERABLE, AND THERE IS A HYDRAULIC LEAK IN THE LEFT REAR OUTRIGGER. THE BATTERIES ARE BAD AND THE
GAS FORK LIFT, MFG. CATERPILLAR, HAS CARBURETOR PROBLEMS, THERE ARE NO FORKS, HAS LIFTING BOOM. REPAIRS REQUIRED.
1978 CRANE, MFG. GROVE, LIFTING, SELF-PROPELLED, HYD/OP, 7.5 TONS, SN GRO42452, THE ENGINE LOCKED UP AND THE BATTERIES ARE BAD, ENGINE AND TORQUE ASSEMBLY REMOVED.
TEST MACHINE, ROCK SAMPLE CRUSHER, MFG TINIUS OLSON UNIVERSAL, APPROXIMATE MINIMUM WEIGHT 4,000 LBS, 29 1/2 INCHES WIDE X 24 INCHES DEEP X 76 3/4 INCHES HIGH. (1 EA) -USED- **REPAIRS REQUIRED BUT NOT
ELECTRIC ARC WELDING EQUIPMENT, TRAILER MTD, 1980, MFG. MILLER ELECTRIC CO., MDL VRD155, MILLER DIESEL POWERED WILD CAT 350D, 350 AMPS, 100% DUTY CYCLE, 3KW, 40/120V AC, 60 HZ, 3" PINTLE HITCH, DIM:
SKID STEER, MELROE BOBCAT 963, 1997, 4 CYL, 4X4, DIESEL, BUCKET & BACKHOE, EST HRS:1396,
BRIDGING HYDRAULIC JACKS, MFG. TANGYE HYDRALITE CORP., MDL PS 1215, PACKED 2005, POWER LIFT-12.0 INS., RATED LOAD-15 TONS, DIM: 11"W X 5"D X 20"H, BOW SIZE 31"L X 12"W X 5.5"H, STILL IN BOX, 6 EA; ES
BRIDGING HYDRAULIC JACKS, MFG. TANGYE HYDRALITE CORP., MDL 1215, PACKED 2005, POWER LIFT-12.0 INS., RATED LOAD-15 TONS, DIM: 11"W X 5"D X 20"H, BOW SIZE 31"L X 12"W X 5.5"H, STILL IN BOX, 4 EA; EST.
BRIDGING HYDRAULIC JACKS, MFG. TANGYE HYDRALITE CORP., MDL 1215, PACKED 2005, POWER LIFT-12.0 INS., RATED LOAD-15 TONS, DIM: 11"W X 5"D X 20"H, BOW SIZE 31"L X 12"W X 5.5"H, STILL IN BOX, 6 EA; EST. W
BRIDGING HYDRAULIC JACKS, MFG. TANGYE HYDRALITE CORP., MDL 1215, PACKED 2005, POWER LIFT-12.0 INS., RATED LOAD-15 TONS, DIM: 11"W X 5"D X 20"H, BOW SIZE 31"L X 12"W X 5.5"H, STILL IN BOX, 5 EA; EST.
MILLER ELECTRIC WELDER, WITH TRAILER, YR:UNKN, MDL:TRAILBLAZER 44D, L 14' X W 8' H 6' SALVAGE
CATERPILLAR 3306, DIESEL ENGINE, USED.
CATERPILLAR 3306 DIESEL ENGINE, USED.
AUTOCLAVE/STERILIZER AMERICAN STERILIZER CO., SV-116, AUTOCLAVE (STERILIZER), MODEL DS-587, 10J82C, VAC01. MANUAL, PARTS AND OTHER ACCESSORIES INCLUDED
1980 PETTIBONE N-6000 RTL FORKLIFT, SN:6175, 06 CYL, DIESEL, CAPACITY:6000, GVWR:25000. REPAIRS REQUIRED
DIESEL GENERATOR, MANF: HOLLINGSWORTH, MODEL: MEP005AAS, 30KW, ACOUSTIC SUPPRESSION KIT, NEW BATTERIES REQUIRED, 2" BALL HITCH, 4312 LBS, DUAL WHEELS-SINGLE AXLE, SALVAGE
ENGINE GENERATOR, MFR: WARNER SWASEY, 37.5 KVA, USED/MAY REQUIRE REPAIRS
ENGINE GENERATOR MFR: CONSOLIDATED, 37.5 KVA, USED/MAY REQUIRE REPAIRS
MILLER MOBILE WELDER, MODEL: TDM 27, 3 KW, 115 VOLTS, 60 HZ, NEEDS STARTER, THIS AUCTION ITEM MAY BE MISSING PARTS AND IT IS UNKNOWN OF ITS OPERATING CONDITION, NO MAINTENANCE RECORDS AVAILABLE. REPAI
GROUND POWER UNIT, BRAND: TRI ELECTRON, THIS AUCTION ITEM MAY BE MISSING PARTS AND IT IS UNKNOWN OF ITS OPERATING CONDITION, NO MAINTENANCE RECORDS AVAILABLE. REPAIRS MAY BE REQUIRED.
SAND BLASTER (1 EACH), MFR UNIVERSAL EQUIPMENT, MODEL: B-4, (CONDITION USED, REPAIRS MAY BE NEEDED
GENERATOR, TRAILER MOUNTED, HOLLINGSWORTH, DIESEL,MDL. MEP 005A, 30KW, 50/60, 120/208, 240/416, MISSING 2 DOORS, 3 PHASE, 373 HRS., MIS. REPAIRS MAY BE REQUIRED.
GENERATOR, LIBBY, DIESEL, MDL. MEP, 005A, 30KW, 76 HRS, 120/208 240/216, 50/60 HZ, 3 PHASE, IMG 1096/1098/1099 REPAIRS MAY BE REQUIRED.
GENERATOR, HOLLINGSWORTH, DIESEL, MDL. MEP 005A, 30KW, 877 HRS 120/208, 240/216, 50/60 HZ, 3 PHASE, IMG 1103/1104/1105.
PIPE GROOVING MACHINE, MFG. PN: VE260 SERIES, CAGE #79154, 230/460V, 3 PH, 60 HZ, 1750 RPM, DIM: 40"W X 29"D X 62"H, 1 EA; EST. WT. 950 LBS. REPAIRS MAY BE NEEDED: MAY BE USED, WORKING CONDITION UNKN
PIPE GROOVING MACHINE, PN: VE260 SERIES, CAGE #79154, 230/460V, 3 PH, 60 HZ, 1750 RPM, DIM: 40"W X 29"D X 62"H, 1 EA; EST. WT. 950 LBS. REPAIRS MAY BE NEEDED: MAY BE USED, WORKING CONDITION UNKNOWN
BRIDGING HYDRAULIC JACKS, MFG. TANGYE HYDRALITE CORP., MDL 1215, PACKED 2005, POWER LIFT-12.0 INS, RATED LOAD-15 TONS, DIM: 11"W X 5"D X 20"H, BOW SIZE 31"L X 12"W X 5.5"H, 6 EA; EST. WT. 327 LBS. U
BRIDGING HYDRAULIC JACKS, MDL 1215, PACKED 2005, POWER LIFT-12.0 INS, RATED LOAD-15 TONS, DIM: 11"W X 5"D X 20"H, BOW SIZE 31"L X 12"W X 5.5"H, 6 EA; EST. WT. 340 LBS. UNUSED, STILL IN BOX
DIESEL ENGINE, MFG. OVERHAUL-1992, MDL 3208NA, 8 CYL, DIESEL, BORE & ENGINE TIMING: STD, VALVE LASH: INT: .015/EXH. .025; 1 EA; EST. WT. 1680 LBS. (470496-0085-86; (100) 08-416-01F, TV2) APPEARS TO
PIPE GROOVING MACHINE, 1998, PN: VE268 SERIES, 230/460V, 3 PH, 60 HZ, 1750 RPM, DIM: 27:W X 39"D X 61"H, BOLTED TO PALLET, 1 EA; EST. WT. 728 LBS. REPAIRS MAY BE NEEDED: USED, WORKING CONDITION UNKNO
DIESEL ENGINE, DATES: MFG UNKNOWN, OVERHAUL-1992, MDL 3208NA, 8 CYL, DIESEL, BORE & ENGINE TIMING: STD, VALVE LASH: INT: .015/EXH. .025; 1 EA; EST. WT. 1680 LBS. (470496-0085-85; (99) 08-416-01E, T
PIPE GROOVING MACHINE, PN: VE260 SERIES, CAGE #79154, 230/460V, 3 PH, 60 HZ, 1750 RPM, DIM: 40"W X 29"D X 62"H, 1 EA; EST. WT. 953 LBS
PIPE GROOVING MACHINE, MFG. VICTAULIC TOOL CO., PN: VE260 SERIES, CAGE #79154, 230/460V, 3 PH, 60 HZ, 1750 RPM, DIM: 40"W X 29"D X 62"H, 1 EA; EST. WT. 950 LBS.
PIPE GROOVING MACHINE, MFG. VICTAULIC TOOL CO., PN: VE260 SERIES, CAGE #79154, 230/460V, 3 PH, 60 HZ, 1750 RPM, DIM: 40"W X 29"D X 62"H, 1 EA; EST. WT. 953 LBS.
DM1000 MAIL MACHINE WITH SEALER AND CONVERTER BOX
1990 Lorain LRT275D Rough Terrain 27.5 Ton Crane, only 2,208 hours, Cummins Diesel Engine, 30-94ft four section boom, three sections full power, 26ft offsetting side stow swing-on one-piece jib. Last
2006 TOPCON TP-L4 GV Pipe Laser gives you the advantage of a beam that's four times brighter than conventional beams. That means you never lose track of it - even in direct sunlight! With the TP-LRGV
Tinius Olsen Model MM recorder Test Machine used for testing the stablity of concrete samples. Has a 400,000 pound push or pull capaicity. 208 volts, 60cycle, 3 phase,. Has super L utm pressure transe
Drott carry deck crane with a horizontal boom that will handle 2100 pounds, boom at 60 degrees will handle 3600 pounds and boom at 45 degrees 2700 pounds. This crane runs and operates. It has 996.0 h
1991 Ford Manitex 1461-14 Ton Crane CV477. Model: F-800, Mileage: 40274, Hours: 3984, Engine is Diesel, Exterior: Damage to drivers side front. A lot of rust. Tires are in poor condition - dry rotted.
1983 8.5 ton Pettibone Crane, Model A/S 32M-14. 1439 hours on Detroit diesel engine with Allison automatic transmission. Black vinyl interior. No AC. Minor scratches, dents, dings. Right front hazard
1973 Mobile Crawler Crane by Bucyrus Erie Model 38B
1986 P&H Crane, white paint, model #128T. 5.9 liter engine, diesel. S/N 53752. Tire size 20:5X20. Swing-a-way-extension included. Vehicle serviced every 16 weeks. Rear window broken,low gear is slippi
1986 FMC Link Belt Dragline Crane, 40 ton, Starts with a boost and runs, Detriot Diesel 6 cylinder engine, 60 ft. of stick with an extra 20 ft., Drag bucket 1.25 yard, Clam Shell, 3 1/4 hoist cable 7/
Riehle Compression/Tensile Testing Machine is used to perform test on a number of materials. This device was used by the LA Department of Transportation and Development to perform test on rebar, dowel
Lathe, 36", Sidney Machine Tool Co., Sidney, OH; Length = 18', Width = 6', Height = 5.5'; manufacture date 06/06/1942; Contract # DA-W978 ENG-136; (Motor, 30 HP, Mfg by Westinghouse, Style # 1078085,
1991 Sullair 185 CFM Portable Rotary Screw Air Compressor - was working when replaced 8 months ago - 1094 hours - John Deere Diesel engine - tires in good shape - Pental hitch
Leblond Makino 15" Regal Servo Shift Engine Lathe (3 phase & 60 HZ). The agency is reporting the item was in operating condition when taken out of service.
Grizzly Engine Lathe 1642. Was operational when removed from shop.
1991 Sullair 185 DPQ Diesel powered portable air compressor. Is Operable. 264 hours run time, maintained every 100 hours. Needs new battery, and air hoses on compressor reel. Tires good
1996 INGERSOLL-RAND P185WJD 185 CFM Compressor, 80 HP 4 cylinder JD diesel, bumper pull with lights. Unit taken from service in July of 2007. Was operational when removed from service. Unknown conditi
1994 ONAN/CUMMINS 20-KW LPG GENERATOR SET, I-4 FORD ENGINE, SPEC.NO: 68765F, MOUNTED ON STEEL SLED FRAME, APPROX. L.W.H.: 5'X3'X5', SERVICE RATING: STANDBY, KW: 20/20, KVA: 20/25, PHASE: 1 & 3, PHASE-
Leblond Makino 15" Regal Servo Shift Engine Lathe (3 phase & 60 HZ). The agency is reporting the item was in operating condition when taken out of service.
Wellsaw Horizontal Band Saw Model 1118. Blade size: 1 x .035 x 150. Working Condition when removed
International Submarine Engineering hydraulic 6 axis robotic system. This system is pedestal mounted with 10 horsepower, electric hydraulic power unit and control console. Item is in good condition an
Vectrax Model GS-16V Mill Machine, vari-speed 3-PH
Thermal Dynamics Merlin 6000 plasma cutter with accessories such as fuses, and torch heads. There are 9 bottles of torch coolant. This item appears to be unused but the power cord is scuffed. This cut
Leblond Makino 15" Regal Servo Shift Engine Lathe (3 phase & 60 HZ). The agency is reporting the item was in operating condition when taken out of service
Ingersoll Rand Air Compressor. Model SSR UP6-25-125. 11,668 hours in operation. Equipment was in working condition when removed from use. 25 hp motor, cfm 102, psi 125, voltage 480, phase 3, amps 30,
Harrison Engine Lathe Model 300 G-H Built in 2000, 3 Phase, 230 Volt, 88 amp. Working condition when removed from shop
Bridgeport Drill Press- Model 70177
Harrison Engine Lathe Model 300 G-H Built in 2000, 3 Phase, 230 Volt, 88 amp. Working condition when removed from shop. Worn from use
1986 INGERSOLLRAND 160 COMPRESSOR.TRAILOR MOUNTED. STARTS UP JUST FINE
1993 Old Dominion Model SCL800TM25 Leaf Trailer. Unit has a Ford engine with 3,746 hours. This unit was taken out of service due to an oil leak and engine oveheating. Trailer dumps and measures 25' lo
Universal Iron Worker, Buffalo Forge Company; No. 2 1/2B, Stock # 509, Order # 76Z759; 7.5 HP, 300 RPM Flywheel
Allegany Technologies 30,000 lbs capacity crane scale. It is a model# CL-30K, and comes with remote radio display unit, charger and storage box. It works but needs batteries. Sold as is
1971 Kolberg conveyor model 130-50 and schute
BRIDGEPORT MILLING MACHINE WITH CRUSADER II CONTROL SYSTEM, 9"X43" TABLE, SERIAL #: 1-18-0171, MODEL: F-7347-00-117, HP 3, CYCLES: 50, PHASE: 3, TYPE: TVF TE, DESIGN: B. EQUIPMENT WAS WORKING WHEN USE
Kohler Generator Fast Response II Model 70RZ282. 142 hours
1993 ONAN/CUMMINS 60-KW LPG GENERATOR SET Model 60ENA, V-8 FORD ENGINE, ENGINE MODEL: LSG-8751-6005A, MOUNTED ON 8" STEEL C-CHANNEL FRAME, APPROX. L.W.H: 8'X3'X5', SERVICE RATING: STANDBY, Hz: 60, PF
IPEC 3CA Sandblaster and recovery unit
1991 GRIFIIN/MAC HYDRAULIC TRASH PUMP CART, 6" SUBMERSIBLE/DEWATERING, 10' SINGLE AXLE TRAILER WITH BUDDY BEARINGS, I-4 PERKINS DIESEL ENGINE, TRAILER STABILIZER BARS, APPROX: 13.5-GALLON DIESEL FUEL
2002 ONAN/CUMMINS GENERATOR SET Model DKAF-5554684. 25-KW, I-5 KUBOTA DIESEL ENGINE, MOUNTED ON STEEL BOX FRAME, APPROX. L.W.H.: 5'X 3'X 3', SERVICE RATING: STANDBY, Ph: 1 OR 3, Hz: 60, PF: 1.0 OR 0.8
1994 Workforce XLB-4232 boom lift. It is electric powered with an on board charger. Battery condition is believed to be good. Tires have good tread. Hitch requires 2" ball
CATERPILLAR-D342C INDUSTRIAL CORE TURBO DIESEL ENGINE WITH TWIN-DISC POWER TAKE-OFF AND PHILADELPHIA GEAR DRIVE UNIT-18FP, 6-CYLINDER, BORE: 5.3/4, STROKE: 8, NO LOAD ENGINE RPM: 1310, FULL LOAD ENGIN
Gorman Rupp Dual Pump Station. Model D4-06800. Serial 94-4167-AM. 789 Hours on Pump #1 & 815 Hours on Pump #2. Pump Model #T3A3-B. Working when removed from Service (Removed as part of a system Upgrad
1991 MAGNETEK GENESYS-SSX560 45/34-KW LPG GENERATOR SET, I-6 HERCULES ENGINE, MOUNTED ON TRIPLE HEAVY-DUTY FRAME: 6" STEEL C-CHANNEL FRAME, WHICH IS MOUNTED ON 6" STEEL I-BEAM AND MOUNTED ON 6-EACH 7
Vectrax Turret Milling Machine Model GS16F. With manuals. Powers up. Purchased 12/17/99
Gray-Eering Manlift Trailer,MLS 88, is self contained and trailer mounted, with an 800 lb. capacity man cage, tandem axles, air brakes, compressor and drop down motor driven tram wheel, and dual (2) S
CATERPILLAR-D342C INDUSTRIAL CORE TURBO DIESEL ENGINE WITH TWIN-DISC POWER TAKE-OFF AND PHILADELPHIA GEAR DRIVE UNIT-18FP, 6-CYLINDER, BORE: 5.3/4, STROKE: 8, NO LOAD ENGINE RPM: 1310, FULL LOAD ENGIN
Walker 69" scrap magnet
Metal Bender/Cutter/Punch, Uni-Hydro Ironworker Brand, 95-ton, Model #95-24
Southtech Industries 1997 Bagging Hopper (1.5 cubic yards) with conveyor and Bagging Head. Features: Bagging Hopper, Bagging Conveyor (to transport bags during bagging operation) includes foot pedal,
MAXXREACH MR-4-25/80 Telescoping Conveyor System consisting of two belts,controlled by two programmable controllers, extends to about 30 feet, 220 volt 3 phase purchased 2000 for $76,739. Length Retra
JLG Lift, 2 wheel drive Mod:34HA,Max Height 34 ft, Unrestricted rate capacity, 500 lbs. Rated Gradability:25%. Acceptable JLG platforms:30x18,30x16,&30x72. Max hydraulic pressure 3000 psi. Date of Mfg
1993 ONAN/CUMMINS 60-KW LPG GENERATOR SET, V-8 FORD ENGINE, ENGINE MODEL: LSG-8751-6005-A, MOUNTED ON 8" STEEL C-CHANNEL FRAME, APPROX. L.W.H: 8'X3'X5', SERVICE RATING: STANDBY, Hz: 60, PF: 0.8, RPM:
U.S. Motor Titan Model 6810MS, 1,250 hp, 885 rpm motor, 3ph, 60h, Type H. Volts: 2,300. Amps: 297. Operational when removed from service.
CATERPILLAR-D353D INDUSTRIAL CORE TURBO DIESEL ENGINE WITH TWIN-DISC POWER TAKE-OFF AND PHILADELPHIA GEAR DRIVE UNIT-21FP, 6-CYLINDER, BORE: 6.25, STROKE: 8, HIGH IDLE RPM: 1224, FULL LOAD ENGINE RPM:
CATERPILLAR-D353D INDUSTRIAL CORE TURBO DIESEL ENGINE WITH TWIN-DISC POWER TAKE-OFF AND PHILADELPHIA GEAR DRIVE UNIT-21FP, 6-CYLINDER, BORE: 6.25, STROKE: 8, HIGH IDLE RPM: 1224, FULL LOAD ENGINE RPM:
1994 Altec TH7 pressure digger. Fair 3.9 litre 4 cyl. cummins deisel engine. comes with a 20 in. and 30 in. auger and an 18 and 24 inch core barrels. comes with some replacement core barrel teeth and
1988 Brown Bear Composter. In working condition
One Compressed Natural Gas (CNG) filling station. Previously used by seller to fill the CNG tanks on transit coaches. Station has been non-operational for 5+ years. Station provided with two (2) 150 h
Pandjiris Model Number 120 E 9-90 external longitudinal seamer is powered by 3 phase 460 volts. Total clamping length of 126? minimum and 132? maximum for a 10? working length capacity. Machine will a
Shred pax AZ80 low speed shredder with 2, 40 horsepower electric motors, feed conveyor, out fall conveyor, 230/460 volts. This unit seems to be in good condition but weathered from outside storage. Th
3D Systems Stereolithography Rapid Prototying Machine Model SLA-3500
Digital Control Lathe. Victor 1640DCL, 7.5hp, servo X Axis 6nm, Coulant Mode .12hp, a/c 230v, 3ph, Servo Z 6nm, Lub motor .1hp, Total power rate 7.5 KVA, 60 hrtz, 24v control.Model 1640DCL
Republic Lagun Model RL-1440 A Plus. 14" CNC/Manual Lathe with Anilam 4200-T controls. Full enclosure with sliding doors, 480 volt built in transformer - will also run on 240 volt 3 phase power. Flood
1988 CUMMINS BIG-CAM 350-KW TURBO DIESEL GENERATOR SET, MODEL: NTTA-855-GS2, MOUNTED ON 8-1/2" C-CHANNEL STEEL FRAME, L.W.H: 11'.6" X 3'.8" X 5'.2", SERVICE RATING: STANDBY, KVA: 438, PF: 0.8, PH: 3,
Lapmaster Model 24 Open Face Precision Diamond Processing Machine (B000403).
Charmilles Robo Fil 300 Wire EDM
Lapmaster Model 24 Pneumatic Pressure Disc Precision Diamond Processing Machine (B000411
1998 Max-Pak High Density Horizontal Baler Model HCE 48-72-8
SELCO 2-RAM BALER MODEL # 2R-12200L-NF-BD SERIAL #8097. THIS BALER UTILIZES TWO (2) 100 HP MAIN PUMPS (INCLUDED WITH THE BALER UNIT) AND OPERATES UNDER 460 VAC 3 PHASE, 60 HZ POWER. THIS MACHINE WAS P
1 Powerline diesel generator. This generator may need repairs. It has a Detroit 12V149 engine, continuous duty cycle. The control panel is missing. The working hours are unknown. The engine does turn
Clausing Colchester 13" Lathe, 480v, 3 phase, not tool post, Runs good, all feeds work well, comes with 3 jaw chuck, live center, and tail stock
Maximat V13 Lathe, 460v 3 phase, runs good, comes with 3 jaw chuck, collet closure system ,tail stock and live center.
Summit 21 Lathe, 480v 3 phase, variable speed, all auto feeds in good condition. Comes with a steady rest, 2-3 jaw chucks, stop, 4 jaw chuck, face plate, dead center, polishing wheel and 1/4 crate bra
Bridgeport Vertical Milling Machine, model J head, variable speed, 460v 3 phase with digital readout (x axis not working on readout), fair condition
Bridgeport Vertical Milling Machine, model M head, 8 speed belt drive, 460v 3 phase. Fair condition
One Cummins Diesel engine, ISB 5.9 liter. Rebuilt by authorized Cummins rebuilder. Never installed or run. Engine stand included
Startrite Cutoff Saw, model SC315D, 208v, 3 phase, 12'x8'x.093 blade, swivel vise, 2 speeds in good condition.
Clausing-Metosa 14" Lathe, Model C1340S, 480v 3 phase, the lathe runs good but auto feeds and tail stock new some work and the digital readout is not working. Machine comes with 3 jaw chuck, live cent
Ammco Brake Lathe-Model 4000; purchased in 1986. In working condition. Re-Advertised due to bidder default.
Square D model 150T3H, Three phase general purpose transformer. High voltage is 480VAC, low voltage is 208Y/120VAC. This item was working when taken out of service.
Sheldon Lathe, 460v, 60htz, 3ph, Full load Current 12amp rating, Over load Current Protection 15amps. Unit was working when removed from service
Kent USA DCL w/ Newall C80 Digital Readout. Model TRL134OG, Serial 1304071591, 220v, No Data Plate. Unit was working when removed from service
Roland VersaCAMM SP300 Laser Cutter/Printer with cover and instruction manual in very good condition
Daewoo GC255 propane forklift. This lift is rated for 5000 pounds and has 188 max. height.
Sullair air compressor model 6E-10.0-H, serial # E92001094, BOM # 252450-003; rated maximum air pressure 125 psig, rated RPM 1740; GE motor, model # 5K182BL218D, 3 HP, 230/460v, 3 phase,60 Hz, 1725 RP
1987 Grimmerschmidt Air Compressor/towable (2 5/16" hitch), Model CSG850, 385 Hours, 5.0L hp, PSIG 125, CFM 2300, Rating 100, fair condition, operable, 50' long 1" hose
1988 Massey Ferguson, Mastercraft Forklift, Model #S.8.H8 Max Load-8000 lbs
IBM 9119-595server> 48 1.9 GHz processors- 36 processors activated; 248 GBs Memory; three 5719 IO Drawers with 20 Slots 16 Disk Bays; thirty four 5716 2 Gigabit Fiber Channel PCI-X Adapters; thirty se
Kohler 150 KW genset with Cummins NT-310-GS diesel engine
PRO SIGN CUTTER BY WESTERN GRAPHTEC. SIGN CUTTER CAN CUT VINYL UP TO 54" WIDE. SIGN CUTTER WAS WORKING WHEN A NEW ONE WAS PURCHASED
Genie GR20 manlift. This lift was manufactured in 2005 and has a maximum height of 19'11
International Pressure Service. Item label is a Eagle HIP, Hot Isostatic Press. Working condition unknown
Handy Herman Manlift Mfd. 1996. 12 volt, max. platform 24 foot. Max. lift is 300 lbs. Was operable when removed from service
1991 R-B model 6 x 6 SP, 600 GPM
Drott 7 1/2 ton carry deck crane, diesel engine, lists 6190.9 hours, with wire rope size 7/16th, Model # 3330
2005 Genie GR20 manlift. maximum height of 19'11
KBC GRIP 1859 LATHE, MFG #: 461. EQUIPMENT WAS WORKING WHEN USE WAS DISCONTINUED
Buffalo Iron Worker with shear 1/2" plates, 6" x 5/8" flats, punch 1" x 5/8", and bar cutter: angle square 4x4x1/2", angles 45 - 3x3x5/16, tee square 3x3x3/8", round 1 5/8" and squares 1 1/2" with 220
Powermatic 712-H Bandsaw
Miller Millermatic 200 Welder. This item might have parts missing that are not known by the Surplus Property Office and the operating condition is unknown
Kysor Johnson Model J Horizontal Band Saw
Bridge Port 3 RT Milling Machine. Three Phase with Accessories. Good Working
TennSmith Model T3616 Foot Shear. Excellent condition
TennSmith Model HB U48-16 Hand Brake.. Excellent condition
Monarch EE Toolmaker's Lathe 3 Phase with Cabinet, Manual Book, and Accessories. Excellent condition
Fryer CNC Lathe Model ET-18
Matsuura Horizontal Machining Center Model ES-450H
Matsuura Vertical Machining Center Model RA-1G
Fanuc CNC Drilling & Tapping Center Model Robodrill A-T14ia
Mori Seiki Vertical Machining Center Model SV-403
Robotic Buffing Station, Fanuc Robot Model LR Mate 200i w/ Full Enclosure, Pendant Control, Fanuc System RJ2 Mate Controller, Double End wire Brush Grinders
Kaeser 25 HP Rotary Screw Air Compressor Model AS25
TCM 5,000 LB LPG Forklift Model FG25N5T
Kitamura CNC Drilling Center Model Mycenter-OB
Matsuura CNC Vertical Machining Center Model RA-1F
Rotex Vibratory Screener Model 221A-SS/SS
Rotex Vibratory Screener Model 221A-SS/SS
Rotex Vibratory Screener Model 221A-SS/SS
Donaldson-Torit Dust Collector Model DFT4-32
Consolidated Osako Super Jet Stream 230 Automatic 5 Pocket Saddle Stitcher w/ Consolidated Osako Model 821 High Speed Rotary Feed, Model CJM 3-Knife Trimmer, Model 612 4-Head Saddle Stitcher, Model OC
Polar Mohr Programmable 46" Paper Cutter Model 115 EMC-Monitor w/ Right and Left Air Bed Tables, 235V, 3 Phase, Safety Lights
Polar Mohr Electromat 46" Paper Cutter Model 115CE, Safety Lights, Air Bed Table
Challenge Champion Paper Cutter Model A,
Dexter-Lawson Super Duty Drill Model B3
Belco Packaging Machine Model STC
Epson Stylus Pro 9600 44" 6/7 Color Inkjet Proofing Printer, CREO Integris Qualified Model K112A
Epson Stylus Pro 9600 44" 6/7 Color Inkjet Proofing Printer, CREO Integris Qualified Model K112A
Clark 4,500LB LPG Forklift Model GCX25E
Clark 3,200LB LPG Forklift Model GCX25
Highlight Industries John Deere Predator Power Pre-Stretch Shrink Wrapping Machine, 48' x 48" Pallet Platform
HOCKMEYER HYR50 MIXER EXPLOSION
Eiger MILLING MACHINE
HOCKMEYER DISPENSATOR MIXER MODEL 2L 2 HP WITH 15 INCH CYLINDER RISE 1" DIAMETER
Eiger MILLING MACHINE
TOYOTA ELECTRIC SIDE SHIFT FORKLIFT 5000LB CAPACITY
HOCKMEYER 75 HP 230V VARIABLE SPEED AC FREQUENCY CONTROL DRIVE 72 INCH CYLINDER RISE 10 INCH DIAMETER
Caterpillar Telescopic Forklift Model TH83
Caterpillar Telescopic Forklift, Model TH103
1986 Harig Capacity 6 x 18 in. permanent magnetic chuck Longitudinal table speed 1/4 IPM-30 SPM Vertical working height under (7 in. wheel) 10 3/8 in. Spindle motor 1 HP Floor area 40 x 31 in. Weight
DoAll 208 volts 3 phase 60 cycles 13 amps 14 in. infeed travel x 21 in. max. under guides 172 in. blade Hyd. Clamping, Hyd. Speed control Hyd. Feed Manual tilting +/- 45 degrees coolant
Cincinnati 8 Foot Press Brake 3 inch stroke Power Rake Adjustment 80 inches between housings. 9'4" L x 6'6" W x 102" H
Cincinnati 12 Foot Press Brake 3 inch stroke Power adjustment 130 Ton Capacity 128 inches between housings Dimensions 14' L x 5'6" W x 8'7" H
1970 Cincinnati Milacron Size 425-184 Horse Power 40 (standard was 25) Table Size 18" X 80" Table Travel 48" Table Feeds Infinite number within range specified 1-150 Rapid Traverse Table Inches per mi
1981 Cincinnati Milacron Size 315-183 Horse Power 15 Table Size 18" X 68" Table Travel 36" Table Feeds Infinite Number within range specified 1-150 Rapid Traverse Table Inches per Minute 300 Machine W
1969 Fortuna Capacity 14 x 25 in. Grinding Wheel Diameter 30 in.
Piranha 50 TON Throat Depth 8" Open Height 13-1/2" Closed Height w/o Die Block 9-1/4" Work Stations
1982 Miyano Fanuc 6T Control Equipped with Jorgensen Chip Conveyor Hydraulic Operated Power Chuck HO-8028 - 8 in
1992 LeBlond Makino Aerospace Surplus as removed from production: Capacities: X = 31.5 Y = 25 Z = 25 Spindle Drive 15/18.5 KW 26 KVA Spindle Nose No. 50 Taper Automatic Tool Changer 40 Table indexing
Joy 100 HP Rotary Screw
Steinemann 40? UV Coating Machine, Mirus HL2 Stream Feeder and Delivery Stacker,
1989 Akiyama 6-Color Sheet Fed Printing Press, New 1989, 20? x 28
Miller 2-Color Sheet Fed Printing Press, 28? x 40?, Perfector 1/1, Royce RecirculatorsRecirculators
AM Graphics New 1993, 4-Pocket Inserter, Cover Feeder, 3-Knife Trimmer, Harris Rima Counter Stacker
Muller New In 2008, 26-Clamps, 21-Feed Pockets, Gatherer Model 3693, 3-Knife Trimmer, Stacker, Multiple Crash Stations; One Glue Pot Set Up For Two (Hot & Cold) Plc Controls And Compensation Stacker,
Muller New 2004
2000 Heidelberg 6-Pocket Collator, Cover Feeder, 3-Knife Trimmer #TR270 (2000), Rima RS-10S Stacker
Shanklin 230 Volt, Allen Bradley TCAT Digital Control, L-Sealer, Knife Section, Shanklin #T-62 Heat Shrink Tunnel
Shanklin New 2008, 280 Volt, Sealed Air Shanklin Knife System, Heat Shrink Tunnel, W/ Variable Speed Conveyor, 8' Variable Speed Power Take-Off Conveyor
Lantec Digital Controls, Rotary Pallet Platform
NELMOR 16" X 28" OPENING, 40 HP MOTORS
NELMOR 16" X 28" OPENING, 40 HP MOTORS
SOUTHERN CALIFORNIA PACKAGING EQUIPMENT LABELER 7 SCPE MODEL ST2100 OS, W/ 12" X 12" MOTORIZED ROLLER CONVEYOR, PORTABLE
GARDNER DENVER 150 HP, MODEL ELECTRA-SAVER II, AUTO SENTRY ES CONTROLS, FULLY ENCLOSED W/ AIR RECEIVER TANK
GLOUSTER ENGINEERING 100 HP, BLOWERS
NELMOR 36" X 20", 150 HP MOTOR, 5 HP BLOWER UNIT, CYCLONE DUST COLLECTOR, BOTTOM DISCHARGE
CUMBERLAND 24" X 14", 75 HP MOTOR, 5 HP BLOWER UNIT, CYCLONE DUT COLLECTOR, BOTTOM DISCHARGE
CLARK 4,500 LB CAP, 188" LIFT HT, 3-STAGE MAST, SOLID TIRES, ROPS
CLARK 2,700 LB, LPG, 188" LIFT HT, 3-STAGE MAST, SIDE SHIFT, SOLID TIRES, ROPS (#2)
CLARK 4,000 LB CAP, 188" LIFT HT, 3-STAGE MAST, SIDE SHIFT, SOLID TIRES, ROPS
NOVATEC CONTINUOUS CRYSTALLIZER SYSTEM, 2000 LB PER HR, 2000 LB CAP, INSULATED HOPPER, PLC CONTROLS, 8" AIR LOCK, MODEL PHH-2000 CFM AIR DRYER, 3 CU FT SS VACUUM RECEIVER, W/ BLOW BACK, CYCLONE FILTER
CONAIR W/ 8,600 LB CAP HOPPER, 15 HP BLOWER, VACUUM HEATER, HOSES, ETC.
TEMPTEK PORTABLE, 10 TON
HUSKY 330 TON, 70.5 CU IN SHOT SIZE, 38.8 OZ 22.6" CLAMP STROKE, HYDRAULIC DAMPENING, CNC CONTROL, COLOR FEEDER, HOPPER, VACUUM LOADER
HUSKY 330 TON, 70.5 CU IN SHOT SIZE, 38.8 OZ 22.6" CLAMP STROKE, HYDRAULIC DAMPENING, CNC CONTROL, COLOR FEEDER, HOPPER, VACUUM LOADER
HUSKY 440 TON, 79.8 CU IN SHOT SIZE, 26.6" CLAMP STROKE, HYDRAULIC CLAMPING, CNC CONTROL, COLOR FEEDER, HOPPER, VACUUM LOADER
HUSKY 550 TON, 145.4 CU IN SHOT SIZE, 34.6" CLAMP STROKE, HYDRAULIC CLAMPING, CNC CONTROLS, COLOR FEEDER, HOPPER, VACUUM LOADER, #7
NELMOR W/ ELECTRIC ROLL FEED, 7 1/2" X 3/4" OPENING, BLOWER SYSTEM, CYCLONE COLLECTON UNIT
BROWN 40" X 36" MAX MOLD SIZE, 48" X 10' OVER, MOTORIZED ROLL FEED, CONTROL CONSOLE
BROWN 35 TON, PLC INCLINE, AC MODEL 1050 PROGRAMMABLE LIMIT SWITCH, (2) UNIOP PLC'S, W/ 6 STEP METAL MACHINE PLATFORM
Tel DUV Tool - Model Act 8
Tel DUV Tool - Model Act 8
LTX E Sort Tool - Model Synchro II HT
LTX E Sort Tool - Model Synchro II HT
LTX E Sort Tool - Model Synchro II HT
Sez Backside Etch Tool - Model 223
FSI Clean/Etch Tool - Model Mercury MP
FSI Clean/Etch Tool - Model Mercury MP
FSI Clean/Etch Tool - Model Mercury MP
FSI Clean/Etch Tool - Model Mercury MP
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Metal Etch Tool - Model TCP 9600
LAM Metal Etch Tool - Model TCP 9600
Lam Contact Etch Tool - Model Excelan
LAM Nitride Etch Tool - Model 9400 PTX
LAM Nitride Etch Tool - Model 9400 PTX
LAM Poly Etch Tool - Model 9400 PTX
Novellus HDP Tool - Model C2-STI,
Novellus STI HDP Tool - Model C2-STI,
Novellus USG/Nitride Dep Tool - Model C2 Sequel
Novellus HDP Tool - Model C2
Novellus HDP Tool - Model C2
Novellus HDP Tool - Model C2
Novellus HDP Tool - Model C2
Novellus W DEP Tool - Model C2
Novellus W DEP Tool - Model C2
Novellus W DEP Tool - Model C2
Novellus PSG Tool - Model C1
Novellus PSG Tool - Model C1
Novellus PSG Tool - Model C1
Novellus USG/Nitride/HRI/PETEOS Tool - Model C1
Novellus USG/Nitride/HRI/PETEOS Tool - Model C1
Novellus W DEP Tool - Model C1
Novellus W DEP Tool - Model C1
Novellus W DEP Tool - Model C1
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
Thermawave Measure Tool - Model TP500
Thermawave Measure Tool - Model 5240I
Thermawave Measure Tool - Model 5240I
Thermawave Measure Tool - Model 5240I
Thermawave Measure Tool - Model 5240I
Thermawave Measure Tool - Model 5240I
KLA Measure Tool - Model UV1250
KLA Measure Tool - Model 2139
AMAT Measure Tool - Model Verasem
Varian MC Implant Tool - Model Viista 810
Varian MC Implant Tool - Model EHPi, E500
Varian MC Implant Tool - Model EHPi, E500
Varian MC Implant Tool - Model EHPi, E500
Axcelis HE Implant Tool - Model GSD/HE
Axcelis HE Implant Tool - Model GSD/HE
Axcelis HC Implant Tool - Model GSD/200E2
Axcelis HC Implant Tool - Model GSD/200E2
Axcelis HC Implant Tool - Model GSD/200E
Axcelis HC Implant Tool - Model GSD/200E
Axcelis HC Implant Tool - Model GSD/200E
Axcelis HC Implant Tool - Model GSD/200E
Aviza Sinter Tool - Model VTR 7000
Aviza Sinter Tool - Model VTR 7000
Aviza Sinter Tool - Model VTR 7000
Aviza VF Oxide Tool - Model VTR7000
Aviza VF Oxide Tool - Model VTR7000
Aviza VF Oxide Tool - Model VTR7000
Aviza VF Oxide Tool - Model VTR7000
Aviza LPVCD Teos Tool - Model VTR 7000
Aviza LPVCD Teos Tool - Model VTR 7000
Aviza LPVCD Teos Tool - Model VTR 7000
AMAT RTP Tool - Model Centura
AMAT RTP Tool - Model Centura
AMAT STI Polish Tool - Model Mirra Mesa
AMAT Oxide Polish Tool - Model Mirra
AMAT Oxide Polish Tool - Model Mirra
AMAT STI Polish Tool - Model Mirra
Hartford Vertical Milling Machine
Bridgeport Milling Machine
Bridgeport CNC Vertical Milling Machine
Bridgeport CNC Vertical Milling Machine
Fadal CNC Vertical Machining Center Model VMC 5020A (917-1)
Innertech CNC Multi-Axis Gang Tool Bar/Chucking Machine, Model 42-170
Kohema Gap Bed Engine Lathe
Hardinge Second Operation Lathe Model HLV-H
Kirk-Rudy Tabber Model 535-CS
Lake Vision Systems Matched Data System Model MR5-660P
Kirk-Rudy Tabber Model 535CS
Brackett Circular Padder Model CPM-89-1E
Kirk- Rudy IR Dryers, 6000 Watt Model 881-3
Kirk-Rudy IR Dryers, 6000 Watt Model 881-3
Kirk Rudy IR Dryers, 6000 Watt Model 881-3
Kirk Rudy Vacuum Transport Base (Mix and Match) Model 21SVS362,
Kirk Rudy Vacuum Transport Base (Mix and Match) Model 21SVS362
Band-All Bander Model BA32-30
Wexler Bander Model ATS-MS-JUMBO,
Wexler Bander Model ATS-MS-JUMBO,
Didde 8-Color 22" Wide Web Press Model F226JN-G
Grutzmacher OAM Inserter Model Challenge
Bell & Howell Mailstar Jumbo Inserter 92768A, 10 Stations, Model Mailstar 350
Bell & Howell Mailstar Jumbo Inserter 41975, 10 Stations, Model Mailstar 776
Pitney Bowes 12 Station Inserter Model Mailcrafter
Burhs High speed Inserter 4-Station Model BB600
Heidelberg Stitcher Model ST400
Heidelberg Quick Folder 11 x 17 Inch Max, Model T34C-2-P-2
Heidelberg Folder Model B-20, Model 1220E-4-P-3, 4-4
Heidelberg Folder Model B-20-4, 1220E-4-P-3, 4-4
MBO Folder Model B-26 4-4-4
Heidelberg Folder TH-82, 4-4-4, Model 1224405324
MBO Folder Model B26-1-26/4
Heidelberg 2-Color Sheet Fed Printing Press Model SM-74-2
Mitsubishi Forklift Model FGC20K,
Heidelberg Sheet Fed Printing Press Model Speedmaster 102SP
Bobst Die Cutter Model SP-102-EII
Komori 6-Color Sheet Fed Printing Press, Model L628 + Coater,
Xerox Docucolor / Ryobi 3404 DI 4-Color Offset Press
Mitsubishi 6-Color Sheet Fed Printing Press Model 1F+C,
Heidelberg 2-Color Sheet Fed Printing Press Model HD 102ZP
Stahl Saddle Binder Model ST90
Ryobi D.I. Printing Press Model 3404
Heidelberg 4-Color Sheet Fed Printing Press Model Speedmaster 52-4+LX press
Ryobi D.I. Printing Press Model 3404
Mitsubishi 6-Color Sheet Fed Printing Press Model 3F-6D press
Ryobi D.I. Printing Press Model 3404 EDI.
Hardinge Super Precision HLVH tool room lathe.
Lagun FTV-2S two axis vertical milling machine. 10" x 50" table. Includes Proto Trak Plus CNC controller
Bridgeport Series 1 Milling Machine.
Giddings & Lewis 48" x 60" "HydroStatic" Airlift Table
Giddings & Lewis 42" CNC Vertical Turret Lathe W/ G&L 800 CNC Controls, 42" Slotted Table, 5-Position Turret,
Clark LPG Forklift Model GCS-20C, 3525#
Yamaha Polishing Robot Model K-1
Hurco CNC Vertical Mill #5D
Giddings & Lewis 3" Table Type Horizontal Boring Mill Model 300T
Shuster Wire Straightener & Cut Off Machine Model 400-V, 30" Run Out,
Danly NG OBS Press, 45 Ton
Giddings & Lewis 42" CNC Vertical Turret Lathe
Maho MH 5-"Axis"CNC Horiz. & Vert. Machining Center Model 1000S, 25" Built in Rotary Table, CNC 432 Control
Giddings & Lewis Model Winslomatic, Davis Tool Drill Pointer, HC
Feeler Series 2, Precision Lathe, 10" x 20"
Bridgeport Series 1, Vertical Mill, 2 HP
Bridgeport Series 1, Vertical Mill, 2 HP
Hunter DSP-600 Wheel Alignment System
Electrox 2003 Electrox 600 Group Laser Engraver, Mdl#: Cobra
Mercury Laser Pro Laser Engraver, Mdl#: L-30
TBH Fume & Particle Extractor, Mdl#: FP150
Electrox 600 Group Laser Engraver, Mdl#: Cobra
Matica System Electronic Metal Plate Embossing Machine, Mdl#: C400
FSI Clean/Etch Tool - Model Mercury MP
FSI Clean/Etch Tool - Model Mercury MP
FSI Clean/Etch Tool - Model Mercury MP
DNS Clean/Etch Tool - Model 821L
DNS Clean/Etch Tool - Model 821L
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
LAM Oxide/Nitride etch Tool - Model Rainbow XLE
Novellus HDP Tool - Model C2 Dual Speed-STI
Novellus STI HDP Tool - Model C2 Single Speed-STI
Novellus HDP Tool - Model C2 Dual Speed, Sequel
Novellus HDP Tool - Model C2 Dual Speed, Sequel
Novellus HDP Tool - Model C2 Dual Speed, Sequel
Novellus HDP Tool - Model C2 Triple Speed
Novellus W DEP Tool - Model C2 Single Altus,
Novellus W DEP Tool - Model C2 Dual Altus,
Novellus W DEP Tool - Model C2 Dual Altus,
Novellus PSG Tool - Model C1
Novellus USG/Nitride/HRI/PETEOS Tool - Model C1
Novellus USG/Nitride/HRI/PETEOS Tool - Model C1
Novellus USG/Nitride/HRI/PETEOS Tool - Model C1
Novellus W DEP Tool - Model C1
Novellus W DEP Tool - Model C1
Novellus W DEP Tool - Model C1
AMAT Metal Dep Tool - Model Endura 5500
AMAT Metal Dep Tool - Model Endura 5500
Thermawave Measure Tool - Model 3290I
AMAT Measure Tool - Model Verasem
Axcelis HE Implant Tool - Model GSD/HE
Axcelis HE Implant Tool - Model GSD/HE
Aviza Sinter Tool - Model VTR 7000
Aviza Sinter Tool - Model VTR 7000
Aviza Sinter Tool - Model VTR 7000
Aviza Sinter Tool - Model VTR 7000
Aviza Sinter Tool - Model VTR 7000
Aviza Sinter Tool - Model VTR 7000
Aviza Sinter Tool - Model VTR 7000
Konica Minolta Bizhub pro c5500, 55 ppm, max page size of 13 x 19.2"
Kodak Perfect Binder Model BB2005, produces coverbound books to a maximum thickness of 40mm - 1.5"
Heidelberg DigiMaster 9110, 600 x 600 dpi, 110 ppm, max page size of 11 x 17"
Agfa Selectset Avanta 44S Model 2637/3130 Digital Image Setter
Shinohara 20" x 26" 2 Color Perfector Press Model 66IIP
Shinohara 28" x 40" 2 Color Perfector Press Model 104IIP
Prism 54" Cutter Model MPU 52
Helmut Knorr Paper Lift Model L-1000-W-4-S
MBO America 8 Page/12 Plate Folder Model M7.35
MBO America 8 Page/12 Plate Folder Model M7.35
MBO America Dual Feed Perfection Folder Model R960
MBO America Dual Feed Perfection Folder Model R960
Yale 3,000 Lb Cap Electric Forklift
Conflex E-250 Auto Sealer Model E250HS
Lantech Automatic Stretch Wrap Machine Model Q30
Horizon Horizon 32 Pocket Collator Model MC8
Polar Mohr Paper Cutter Model 115 EMC-MON
Polar Mohr Paper Cutter Model 115 EM
Spiral Binding Co. Hand Punch Model PP36
James Burn International Wire-O Binder Model BB38A
GBC STL 1000 Wire-O Binder Model STL 1000
James Burn International/Lhermite Punch Model EX380
James Burn International/Lhermite Punch Model EX380
James Burn International/Lhermite Punch Model EX380
Sickinger Spiral Wire Machine Model PS517
Spiel Associates Coil Former
Spiel Associates Sterling Coilmaster Coil Inserter Model CM179
James Burn International/Lhermite Punch Model EXP700
MGI Multi Function Finishing Station Model UFA 3, Cut-Slit-Score-Perforate, In One Pass
MGI Multi Function Finishing Station Model UFA 3, Cut-Slit-Score-Perforate, In One Pass
MGI Punch Card Pro Automatic Plastic and Paper Credit Card Format Finisher
MGI Punch Card Pro Automatic Plastic and Paper Credit Card Format Finisher
MGI Press Card Pro Hot Platen Lamination Press For Paper and Plastics
MGI Press Card Pro Hot Platen Lamination Press For Paper and Plastics
MGI Uvarnish Offline Liquid Coating System
MGI 4 Color Process Digital Press For Multi Substrates Paper and Plastics, Model Meteor DP40 Pro
Ingersoll Rand Air Compressor Model SSR-EPE125-2S, S/N FF2154U01113, Rotary Screw Type, 125 HP Motor, 621 CFM, Enclosed, 2001
Cincinnati Milacron "Eclipse" CNC Blow Molding Machine Model E90-D-4000, S/N B72A0193001, 50 Ton Clamp, 20" Head Centers, 40" X 31" Patens, 3.5" Extruder, (2) Cincinnati Milacron Camac Bel CNC Systems
Caterpillar 3,500 lb Cap LPG Forklift Model T60
Kaeser Model 7B19 Air Dryer
Kaeser Model SK15 Air Compressor 15 HP
Mori Seiki MV-JR CNC Vertical Machining Center w/ (16) ATC 10,000 RPM, Cat #40 Spindle and Fanuc 10M CNC Control
SMW Model RT160PY 4th Axis Rotary Table
Okuma #ESV-4020 CNC Vertical Machining Center w/ Okuma OSP-U10M CNC Control, 8,000 RMP, CAT #40 Spindle (2) ATC, Full Encosure W/ Coolant
Okuma ES-V3016 CNC Vertical Machining Center w/ okuma OSP-U10M CNC Control, 8,000 rpm, CAT #40 Spindle, (20) ATC, Full Encosure w/ Coolant, w/ SMW Pallet Changer
Mazak Nexus 410A CNC Vertical Machining Center w/ (30) ATC, !12,000 RPM, CAT #40 Spindle, Full Enclosure, Thru-Spindle Coolant and Mazatrol Fusion 640M CNC Control
Nakamura-Tome #SL-1 CNC Turning Center w/ Fanuc 6TB CNC Control
Yang #SML-12 CNC Turning Center w/ Fanuc O-TD CNC Control
Doosan Lynx #220-LC CNC Turning Center w/ 8" Chuck, 16" Collet Nose and Fanuc O-ITC CNC Control
Hardinge #HC Chucker
Clausing Colchester 15" x 36" Engine Lahte w/ 25 - 2000 RPM and DRO
Okuma #LS21" x 56" Engine Lathe
Comet Milling Machine w/ Digital Readout 9" x 50" Table and Power Feed
Brown & Sharpe Gage 2000 Coordinate Measuring Machine
Tesa 350 Height Gage
Fowler Trimos V-600 Height Gage
Yale 5,000 LB Cap LPG Forklift Model
1500 WATT LASER MODEL 820 C02 ROFIN-SINAR
YODER 8 STAND ROLL FORMING MILL
MIGHTY TURN METAL LATHE 84" BED
LE BLOND METAL LATHE 84" BED
BRIDGEPORT VERTICAL MILL ALALM WIZARD 800-3 PHASE 49 X 9 BED
MILLPORT VERTICAL DRILL MICRO WIZARD ELECTRONICS 42" X 9" BED- 3 PHASE
DOUBLE MITER SAW
NISSAN 5000LB PROPANE FORKLIFT
HERCULES ELECTRIC WALKING FORK LIFT
CLARK ELECTRIC FORKLIFT WITH CHARGER
DAEWOO TRIPLE MAST WITH SIDE SHIFTAND PROPANE TANK
CLARK FORK LIFT MODEL C500-40 WITH PROPANE TANK
TCM FORKLIFT MODEL FCG25 WITH SIDE SHIFTS AND PROPANE TANK
SULLAIR 30 HP AIR COMPRESSOR
SULLAIR 30 HP AIR COMPRESSOR
HARDINGE DSM LATHE
POWERMATIC ALUMINUM BAND SAW
HAAS VF-2 CNC VERTICAL MACHINING CENTER
MAKINO HORIZONTAL MACHINING CENTER
MAKINO HORIZONTAL MACHINING CENTER
MAKINO HORIZONTAL MACHING CENTER
STAMA CNC VERTICAL MACHINING CENTER
SHEARING HILL ACME #3 METAL WORKING PUNCH PRESS WITH FOOT PEDAL
INGERSOLL RAND COMPRESSOR WITH 20 GALLON TANK 40 HP screw compressor
CINCINNATI MILACRON HORIZONTAL 250 TON 20 OZ SHOT SIZE FUNCTIONAL CROSSBAR 27" PLAT. 32"X32"
CINCINNATI MILACRON HORIZONTAL 375 TON 48 OZ CROSSBAR 32" PLAT. 31"X37" FUNCTIONAL
CINCINNATI MILACRON HORIZONTAL 375 TON 20 OZ CROSSBAR 32" PLAT. 31"X37" FUNCTIONAL
QUINCY DESICCANT AIR DRYER 60 HP QUINCY SCREW COMPRESSOR WITH QUINCY AIR DRYER QPNC-500 NON-CYCLING DRYER
CONAIR MUNTERS AIR HANDLE SYSTEM MODEL CH440
CINCINNATI MILACRON HORIZONTAL PLASTIC INJECTION 1000 TON PRESS NEW BARREL CROSSBARS 72" WIDE PLATEN 85" X 65" 165 OZ SHOT SIZE
RACINE HORIZONTAL PLASTIC INJECTION 500 TON PRESS WITH NEW BARREL PH 500 48 OUNCE SHOT SIZE CROSSBAR 36" 45" X 45" PLATEN SIZE
CINCINNATI MILACRON 375 TON 32 OUNCE SHOT SIZE TUBULAR LP
CINCINNATI MILACRON PLASTIC INJECTION MACHINE 375 TON
CINCINNATI MILACRON 375 TON 32 OUNCE SHOT SIZE IMM
CINCINNATI MILACRON HORIZONTAL PLASTIC INJECTION MACHINE 20 OUNCE 250 TON PC 111
CINCINNATI MILACRON 250 TON 20 OUNCE SHOT SIZE CROSSBARS 28" WIDE PLATEN 33" X 33"
CINCINNATI MILACRON 250 TON 20 OUNCE SHOT SIZE
CINCINNATI MILACRON H-250 250 TON 12 OZ SHOT SIZE -12 TMM -- HEATER 10.9
CINCINNATI MILACRON 375 TON 32 OUNCE SHOT SIZE
CINCINNATI MILACRON 150 TON -14 OZ SHOT SIZE
CINCINNATI MILACRON 500 TON HORIZONTAL PLASTIC INJECTION PRESS 48 A OUNCE 33" CROSSBARS NON RUNNING
CINCINNATI MILACRON 700 TON 70 OUNCE SHOT SIZE HORIZONTAL PRESS CROSSBAR 48" PLATEN SIZE 54" X 54"
CINCINNATI MILACRON 250 TON 20 OUNCE HORIZONTAL PLASTIC INJECTION MACHINE 29" CROSSBARS PLATEN SIZE 33" X 33"
CINCINNATI MILACRON HORIZONTAL PLASTIC INJECTION MACHINE 375 TON PRESS-20 20 OUNCE MAJOR FLI 98 TOTAL FLI 167 CROSSBAR 34" PLATEN SIZE 39" X 39"
CINCINNATI MILACRON HORIZONTAL PLASTIC INJECTION MACHINE 250 TON 20 OUNCE 28" CROSSBAR 33" X 33" PLATEN SIZE
CINCINNATI MILACRON HORIZONTAL PLASTIC INJECTION MACHINE 375-20 20 OUNCE
CINCINNATI MILACRON 500 TON HORIZONTAL PLASTIC INJECTION MACHINE 70 OUNCE 42" CROSSBAR 48" X 48" PLATEN SIZE
CINCINNATI 500 TON MAJOR FLI 172 TOTAL FLI 412 WITH NEWER BARREL AND SCREW CROSSBARS 43" PLATEN 48" X 48"
CINCINNATI MILACRON 700 TON - 110 OUNCE MAJOR FLI 131 TOTAL 290 OUNCE WITH A NEWER BARREL WITH DEEP DRAW WIDE PLATEN 63" X 52" WITH 56" WIDE CROSSBARS
CINCINNATI MILACRON HORIZONTAL PLASTIC INJECTION MOLD MACHINE 500 MAJOR FLI 62.5 FLI 153.5 48 A OUNCE PLATEN SIZE 48" X 48"
CINCINNATI MILACRON HORIZONTAL INJECTION MOLDER - HYDRADAMP 700 TON BASE 110 OUNCE 22000 RMS IMPASSITY 221 FLI MAJOR FLI 76 CC CONTRO
IKEDA RMS-9 RADIAL DRILLING MACHINE INCLUDES SOME TOOLING 20X16
OKAMOTO GRINDER WITH MAGNETIC CHUCK CONTROL 24X12 BED 7966 Acuugar-124 with recirculation cooling/lubricant system
SUMMIT METAL LATHE WITH DIGITAL NEWALL TOPAZ MONITOR INCLUDES CHUCK 89X15 BED
BRIDGEPORT SERIES II SPECIAL LF-200 VERTICAL MILL WITH SONY MAGNASCALE MONITOR INCLUDES SOME ASSORTED TOOLING
2001 TEREX Tele Boom Loader MODEL TX51-19 Telescopic 19ft Reach
2004 PETTIBONE EXTENDO 4X4 ROUGH TERRAIN LOADER FORKLIFT WITH 44FT REACH MODEL NUMBER 8044 8000 LB CAPACITY
1996 International Boom Truck, Model 4700 DT466, International 466 HP Motor, 139,920 Odometer Hours, 15,066 Metered Hours, Manual 5-Speed Transmission
Winco Generator, Trailer Mounted, 2" Ball, Model#25PT0C-3/G, Made in the USA, 25000 Watts, 120/240volts, 104.2 Amps, 60 Cycle Single Phase, Approx. 40 Hours of use since new, with Extension Cord, Test
1996 JLG Lift, Model 40, Electric, 40', 500 lb. Capacity, 48 Volt, 2060 Metered Hours
Clark Forklift Model GPS25MB, 4625 lb. Capacity, 2-Stage, Side Shift, LP, weak batteries, has bad rear wheel bearing
2003 Carolina High Pressure Water Blaster, Ultra Boss Pressure Water Blaster, Model E75, 1292 Metered Hours
Onan 30KW Generator, Model 30.0EK15R106460,120/208 Volts, 526.6 Metered Hours, Powered by Ford Inline 6-Cylinder, Set up to Run Off Natural Gas, comes with Control Box
Ingersoll Rand 100/47 Tow Style Air Compressor, 4-Cylinder Gas Engine, 2" Hitch, 2296 Metered Hours, Front Air Controls with Air Hose
Metal Pro Power Tube Bender 9000 with Assortment of Dies, Single Phase
Acer Grinder, Magnetic Chuck 6x18, Model #AGS618, 1993, 8" Wheel, 230V
Cincinnati 3'x7" Radial Arm Drill, 3-Phase
Emco PC 55 CNC Mill, 16"x5" Table, Depth 7" with Vice on Table with Computer
Emco PC 55 CNC Mill, 16"x5" Table, Depth 7" with Vice on Table with Computer
Emco PC 55 CNC Mill, 16"x5" Table, Depth 7" with Vice on Table with Computer
Emco PC Turn 55 CNC Lathe, 12x5 with Fanuc Control on Table with Computer
Emco PC Turn 55 CNC Lathe with Fanuc Control, 5"x12" on Table, with Computer
Emco PC Turn 55 CNC Lathe, 12"x5" with Fanuc Control on Table with Computer
Emco PC Turn 120 CNC Lathe, Floor Model 6E Fanuc, Series O Control, with Power Tailstock and 8 Position Turret
Hurco KM3P Vertical Mill, 38"x10" Table, 3 Axis CNC, Altimax control, 3-Phase
HURCO Model KM3 3 Axis CNC Mill, Table Size 42"x12" Altimax Control, 3-Phase
Bridgeport Series I Vertical Mill 9"x42" Table, 1 1/2 HP, Acu-Rite 2 Axis DRO, 3-Phase
Bridgeport Series I Vertical Mill 9"x42" Table, 2 HP, 3-Phase
Hurco Mill, 48"x12" Table, 3 Phase, 240-480V Variable Speed
Bridgeport Series I Vertical Mill, 9"x42" Table, 2 Axis DRO, 2 HP, 3-Phase
Bridgeport Series I Vertical Mill, 2 Hp, 9"x42" Table, DRO for X & Y, 3-Phase
Acer Ultima 3V Mill, 50"x110" Table, Newal DRO, 3-Phase
Braun model 2000H-SH, 208 volt, 3 Ph, 600 # capacity, 3, 000, 000 BTU, 125 PSI steam dryer (55.7 boiler HP REQ) (MFG. 1993)
Challenge model CFG-I2, 500, 000 BTU/HR natural gas/480 volt industrial dryer (400 # max. capacity), basket DIMS: 66" x 69"
Braun model 600NEUT. TSL, 480 volt, 3 Ph, 60 cycle, 26.3 RPM (wash), 277/554 RPM (extract, counter clockwise), 650/295 # capacity washer-extractor
Braun model NMTS, 240 volt, 3 Ph, 60 cycle, 31.7 RPM (wash), 554 RPM (extract, counter clockwise), 400 # capacity washer-extracto
Lagun FTV-2S Vertical Mill with Acu-Rite 2-Axis D.R.O.
Onan Generator with Onan L634 Diesel Engine Model #50.0DL6B, Service Rating Standby, 250 Work Hours, New Battery, Hertz60, RPM 3600, Single Phase, 50-KVA50, 3-Phase 50-KVA 62.5, Amps 174/208, Enclosed
JLG Scissors Lift Model 1932-E, 19' Height, 24 Volt
Grove Nugget Series Scissors Lift, Model SM2633E, 20' Height, 24 Volt
Grove Scissors Lift, Model SM2232E, 16' Height, 24 Volt
MEC Scissors Lift, Model 220TMII, 19' Height, 24 Volt
1996 Sky Trak 6036, 4766 Metered Hours, Cummins 4-Cylinder Diesel Motor, has Newer Battery and Starter, 48" Forks, (3) Forward Gears, (3) Reverse Gears, 5' Fork Mast
Tom Cat model 350, 24 volt rechargeable riding floor scrubber, batteries included
Tom Cat model 350, 24 volt, rechargeable riding floor scrubber batteries NOT included
Tom Cat model 350, 24 volt, rechargeable riding floor scrubber batteries NOT included
True model T-72F 115/230 volt commercial refrigerator at approx 78" width x 84" height x 30" depth (Working condition unknown, could not test), unit appears to be in fair condition
Ingersoll Rand model 100/47 tow behind air compressor with a 4 cylinder gas engine, 2" hitch, front mounted air controls, 2296 hours on meter and approx. 50' of air hose
Toyota Forklift, Model 42-4FG25, 2855 Metered Hours, 5,000 lb. Capacity, All New Pneumatic Tires, New Paint and Seat, Triple Mast 84/185, 48" Forks, LP, Sells with Tank
Genie 145/22 Boom Lift, 4WD, Propane or Gas Powered, 2921 Hours, Ford 4-Cylinder Motor, Model LRG-425I-6007-2, Motor
Clark 6000lbs Model C500560 Hi Lo, 130" Lift, 2-Stage Mast, Solid Tires, Propane, 48" Forks, 5,668 Metered Hours
CAT Forklift, Model#GP35, 7,000lb Capacity, With All New Air Tires, Lifts 187" - 3 Stage, Side Shift, 44" Forks, LP, 5381 Metered Hours
Hyster Forklift, Model#H50XL, 5,000lb Capacity, With All New Air Tires, Lifts 169" - 3 Stage, 48" Forks, LP, 394 Metered Hours
Mitsubishi Forklift, Model#FG25, 5,000lb Capacity, With All New Air Tires, Side Shift, 60" Forks, LP, 4007 Metered Hours
Sky Trak Model 8038, 4144 Metered Hours, Auto Trans, John Deere Turbo Diesel Motor, the left rear tire looses air, appears to leak hydraulic fluid from the boom interior, has problems articulating
1997 Hyster H360 XL, Has Rebuilt Motor Including Pistons, Sleeves and Rings and Turbo Charger at 7734 metered hours, Perkins Diesel Motor, Pneumatic Tires - (3) are newer, 8' Long Forks, 36,000lb Capa
JLG Manlift, 45HA 2X4, Gas or LP (No Tank), Motor has approx. 5,000 Hours, 500 lb. Capacity, 45' Reach, recently changed hydraulic oil and filters, one of the lifting cylinders said to not work (middl
Smith Quality Air Compresser Kubota diesel engine, 1505/E, Model 100DP, manufacture date is 07/98, max RPM 2350, CFM 100, max pressure is 125, Smith Ridge Runner, Pinto style hitch, tires are approx.
Hobart model 6614 230 volt 3 phase meat saw
Lift King model LK 8M22 diesel powered fork lift with 8000 # max. capacity, 14' max. lift height, 24" load center, 14,000 # vehicle weight, 48" front tires, 30" back tires, 5" x 59" forks, 3900 hours
Genie model Z-45/22 gas/propane powered boom lift with 500 # rated work load, 45' platform height, 30" x 72" platform
Lincoln model RANGER 10,000 Plus outdoor tig welding power supply with 225 AC amp, 25 volt output, gas powered Kohler 23 Hp motor (MFG. 2008)
Marvel series 8 Mark II, 220/440 volt, 3 Ph Vertical Tilt Frame band saw with 18" max. width cutting capacity, 22" max. cut height, direct drive feed
Ficep Model A 152 CNC Angle/Punch/Shearing Line Year 2003, can be converted to flat bar channel or H-beam processing, currently set up for precessing, Max thickness: 15mm, max punch size:32mm, in 15m
Hyd-Mech model V-25, 220/440 volt, 3 Ph, steel band saw with 53" x 45" Table, 25 1/2" depth cutting capacity x 30" max. cut height, hydraulic locks and guide arm, 25 degree left and right tilt, 10 Hp
Geka model HYDRACROP 220-SD Ironworker, CNC Touch Screen Bar Feed System Angle bar cap:8"x8"x3/4", Flat Bar Cap:30"x3/4", Round Cap:2 3/8", Square Cap: 2 3/8", Punching: 1 1/2", Geka Semi Paxy Touch S
1 Fanuc Welding Robot Model S5, Includes Controls Rotary Table and Lincoln CV-400 Power Source
Ridgid model 369-12, 115 volt, threader (1/8" to 2" pipe and 1/4" to 2" bolt) Includes various dies, hardened bolts and custom fabricated steel stand
Nelson model 6000, 220/440 volt, 3 Ph, stud welder with hose and (2) guns. (work shop) 1" Capacity
HE&M Horizontal Saw Mdl 1500LA 1 1/2" blade, 25 x 25" cutting capacity with Automatic bar feed and out feed conveyor
Cincinnati Century Hydraulic 10' x 1/4" Shear, Model 2H10, Equipped with front operated power back guage
CAT Forklift, model #GC25K, 5,000 capacity, 3 stage mast with side shift, 48? forks, 3292 hours with tank
Yale forklift, model #GLP040AFNUAF084, 4,000 lb, capacity, 3 stage mast with side shift, 42? forks, 5941 hours with tank
Clark Forklift Model GPS25MB, 4625 lb. Capacity, 2-Stage, Side Shift, LP, weak batteries
Sullivan Industries Towable Air Compressor, 210 CFM, Max Speed 2500rpm, 1084 Metered Hours, John Deere Diesel Engine
JLG Scissors Lift, Model CM2033, 24volt, 20' Max Travel Height, 650lbs Capacity, has scattered rust/corrosion
Fairbanks-Morse Towable Generator, Pintle Hitch, LP, International Motor UV549 Model 93.8 KVA, 3-Phase, Transforms 480 3-Phase 112.5 KVA, Automatic Start, Can Run on Gasoline Also
1999 Upright MX-20 Scissors Lift, 127 Metered Hours, White Non-Marking Solid Tires, New Batteries, and Certification 5-09-10, 24volt, 30"W x 64" to 120" Platform
WILLIS Micro Cut ST1440 Engine lathe, 14" swing, 40" centers, 70 to 2000 rpm, inch and metric threading, 1-1/2" spindle bore,, sony digital readout, series # 7854, 5hp, 220 volt, 3-phase
1997 WILLIS Micro Cut 1050 vertical mill, 10" x 50" table, power X and Y, power draw bar, sony 3 - axes digital read out, 3 - hp motor
Enshu S300 Virtical machining center, Enac controls, 27-1/2" x 16" table, 19.7" x 15.7" x 11.8" XYZ travels, Kurt vise
DAEWOO Lynx 200 CNC lathe, fanuc 21T control, 8-1/2" Kitagawa 3 jaw chuck, turret, tail stock chip conveyor
Charmilles, ROBO FORM 100, electrical discharge machine, charmilles controls, 17 1/2" x 11" table, 220mm x 160mm x 220mm XYZ travels
1980s NTC , TMC-40V Vertical Machining center, fanuc control, 19" x 40" table, 40" x 20" x 25" XYZ travels, automatic tool changer
1990 NTC , TMC-40V Virtical Machining center, fanuc control, 19" x 40" table, 40" x 20" x 25" XYZ travels, automatic tool changer
1995 Monarch Predator CNC Lathe, fauc series 21-T control, 8-1/2" 3 jaw buck chuck, turret, tailstock, 200mm x 600mm, chip conveyor, 230 volt, 3 - phase
1998 Iemca, VIP70 CNC bar feeder, 56" long bars
Toyota model 42 6FGU25 forklift, 5,000 lb capacity, 595 original hours, 189? lift triple mast, 48? forks, side shift, dual fuel LPG/gas, tires 7:00-12 frts/6:00-9 rears. No leaks and runs out good. Dr
FPEC model HLD725, stainless steel Gondola dumper, hydraulic, self contained, cat walk and stairs.
JLG Industries, Inc. model 1932-E, 24 volt rechargeable scissor lift, max platform capacity of 500 lbs
JLG Industries, Inc. model 20DVSP, 24 volt rechargeable platform lift with max platform capacity of 400 lbs
Genie model GS-1930, 500 lb capacity scissor lift, shows 1,436 hours on meter
Komatsu model FG20C-12W type LP propane sit down forklift with a maximum load capacity of 4000# (Fair running condition) unit appears to have damage and in need of repair, hours approx 10913.7, key in
Nissan model PJ02A20PV approx 4000# capacity propane powered fork lift , key included, side shift not installed
Nissan model PJ02A20PV approx 4000# capacity propane powered fork lift keys are included, side shift not installed
Nissan propane fork lift, model KAPHC2A23PV, 4,000 lb capacity in used condition
Yale propane fork lift, model GLP040AFNUAF084
Daewoo propane fork lift, model G20E-3, 4,000 lb capacity (working condition unknown, unable to test) in fair condition, slight scratches,
Daewoo propane powered fork lift model 20E-3, (working condition unknown, unable to test) in used condition, has slight rust
1997 Ford F-350 Bucket Truck, 7.5L Gas Motor, 191,778 Odometer Miles, Model A28D, Auto Transmission, Telsta Boom, Pintle Hitch, missing radio, some chips and dings, ripped seat, front tires are worn
1994 GMC Topkick Boom Truck, 20' Bed, 60' Reach National Crane Series 556B on 1994 GMC Tandem, Catapillar Engine and Eaton Fuller 8-Speed Transmission with Hi-Lo. Air Brakes,Includes Pallet Forks, Spr
Nissan Forklift, Model CRGH02F30V, 6000lb Capacity, 130" Lift Height, 3-Stage Mast, 1012 Metered Hours, Sells with Propane Tank
Fanuc S420-W Robot with R-ST Controller System, Robot Controller Type A05B-2350-BOO4, 480 Volt, 3-Phase
Towable Pioneer 6" Water Pump, Model #PP66S12L11-F41914, 4-Cylinder Deutz Diesel, runs and pumps water, 7 hours on rebuilt engine
Heli Forklift, Model #CPYD25, 5,000 lb. Capacity, with Side Shift, Year 2007, 160 Metered Hours, LP, Sells with Tank, 3-Stage Mast, Solid Industrial Tires, 42" Forks
Miller Tig Welder: Dynasty 300 DX, water-cooled, 208, 220, or 460v, 1or 3PH, has manuals, extra tips, and gauges. Used one time, in like new condition.
1996 Bowie 1100-Gallon Gooseneck Hydro-Seeder, 4-Cylinder Diesel, Newer Clutch, Tandem Axle, Tower or Reel, 996 Metered Hours, Sand-Blasted and Re-Painted Interior
Case 200TX Directional Boring Machine, 4550 Metered Hours, 32-10' Rods, 3-Cylinder Diesel Motor, Rubber Ext. Tracks, (2) Stake Down Augers, Water Tank
Tomcat model 350 24 volt rechargeable electronic sit down floor scrubber (Working condition unknown, could not test), unit appears to be in fair condition and in need of repair, unsure if all parts a
Ingersoll Rand Model P50-PE 125 50HP rotarty screw air compressor.
Tos Model SUS 80 32"x 200" engine lathe. 32" 4 jaw chuck. Tailstock. Steady rest. 7-900 RPM
Polamco Model TUM-35 14" x 40" engine lathe. Taper attachment. IN/MM threading. 8" 4 -jaw chuck.
DoAll Model MDC-1212A Fully automatic horizontal bandsaw. Infeed/exit conveyor. Power clamping/stroking vises
2000 GMC Sierra 3500 HD Utility Truck, 6.5L Diesel Motor, 168,417 Odometer Miles, Auto Transmission
1989 Ford F700 Bucket Truck, 429 V-8 Motor, 085,677 Odometer Miles, Manual 10-Speed Transmission, 2-Door
RAFTER 14 STATION ROLL FORMER. 28 - 33" LONG, 1.5" DIAMETER SPINDLES, 11" SPINDLE SPAN-CENTER TO CENTER,, ELECTRIC VARIABLE SPEED & BRAKE, SUPPORTS INCLUDED. TISHKEN FLYING CUT OFF. 3HP MAIN MOTOR, JO
COLCHESTER TRIUMPH 2000 ENGINE LATHE. 15" SWING, 50" CENTERS, INCH & METRIC THREAD, 25-2000 SPINDLE RPM, 2" SPINDLE THROUGH HOLE, THREADING, 10" - 3JAW CHUCK, FOOT BREAK, MODEL# TRIUMPH 2000,
NIAGARA MECHANICAL SQUARING SHEAR. 16 GUAGE X 12' CAPACITY, 3HP DRIVE MOTOR, MODEL# 412. IN WORKING CONDITION.
NIAGARA M22 OBI PRESS. 2" STROKE, 22 TON, 8.75" SHUT HEIGHT, 2" ADJUSTMENT, 12" X 20" BED, 100-340SPM, AIR CLUTCH, PALM BUTTONS, MODEL# M22
NICCO HYDRAULIC SURFACE GRINDER. 12" X 24" ELECTROMAGNETIC CHUCK, POWER ELEVATION, WHEEL GUARD DRESSER, MODEL# NSG-6H
IRON BAY WELDING SYSTEM WITH LINCOLN SQUARE WAVE TIG 175 WELDER. SINGLE PHASE, 460V, 10/.125 CAPACITY, MODEL# MP-22
MINSTER 60 TON OBI PRESS. 6" STROKE, 6" ADJUSTMENT, 36" BED, LIGHT CURTAINS, PALM BUTTON CONTROLS, WINTRISS CLUTCH/BRAKE CONTROL, MODEL# 60-4-36
NACHI RED RING GEAR ROLLER. MODEL# RGB. DUEL DIE SYSTEM, AUTO PARTS LOADER.
DEVLIEG 3B JIG MILL. 3" SPINDLE, 36" X 60" T-SLOT TABLE, SONY 3 AXIS DIGITAL READ OUT, 48" VERTICAL TRAVEL, MODEL# 3B
DEVLIEG 3H-72 SPIRALMATIC JIG MILL. 3" SPINDLE, 35" X 72" T-SLOT TABLE, SONY 3 AXIS DIGITAL READ OUT, MODEL# 3H-72
NORTON (WARNER & SWASEY) PLAIN OD GRINDER. 20HP SPINDLE, 26" GRINDING WHEEL, WHEEL GUARD DRESSER, PICK FEED, TRUING, MODEL# LCTU
MINSTER 60 TON OBI PRESS. 22" X 56" BED, 6" STROKE, 8" ADJUSTMENTAIR CLUTCH, MODEL# 60-4.5-42
MINSTER 60 TON OBI PRESS. 22" X 56" BED, 6" STROKE, 8" ADJUSTMENTAIR CLUTCH, MODEL# 60-4.5-42
MINSTER 60 TON OBI PRESS. 22" X 56" BED, 6" STROKE, 8" ADJUSTMENTAIR CLUTCH, MODEL# 60-4.5-42
TISHKEN 16 STATION ROLL FORMER. 32 - 12" LONG, 1.5" DIAMETER SPINDLES, 8" SPINDLE SPAN-CENTER TO CENTER, MACHANICAL VARIABLE SPEED, SUPPORTS INCLUDED, MODEL# 16LW 1.5 LITTELL AUTOCENTERING REEL. 24" W
WARCO 75 TON STRAIGHT SIDE PRESS. 26" X 72" BED, 20" SHUT HEIGHT, 8" STROKE, 6" ADJUSTMENT, 45 SPM, AIR CLUTCH, 14" X 14" WINDOWS, MODEL# 75-2-72C,
HYSTER S155XL2. MAX LIFT CAPACITY 133", MAX WEIGHT CAPACITY 14250 LBS, TILT STEERING, 6 DEGREES BACK TILT, SIDE SHIFT, 71" FORKS, PROPANE, FRONT & REAR LIGHTS. 2001 YEAR.
HYSTER S50XM. MAX LIFT CAPACITY 189", MAX WEIGHT CAPACITY 4600 LBS, TILT STEERING, 5 DEGREE BACK TILT, SIDE SHIFT, 59" FORKS, PROPANE, FRONT & REAR LIGHTS. 2004 YEAR.
Coats rim clamp model 5060AX, (working condition unknown, unable to test)
Yale model ESC030G4T096, 3000 # capacity, 24 volt stand up fork lift with 231" max. lift height, 4" x 42" forks, 5 degree back tilt, 1841 hour on meter. Includes Yale model YR12-680, 24 volt battery c
Cram A Lot, Model SC-02-30, self contained Commercial Compactor. Mfg. Date 06/14/02. Unit is in working condition. includes the shoot, dog house, compactor and yard container. ( control board NOT incl
Cram A Lot, model CC 02 WM, Commercial Compactor. installed 12/15/1994?working. includes the shoot, dog house, compactor and 40' yard container. ( control board NOT included )
Cram A Lot, model CC-02 RB, Commercial Compactor. Date of Manufacturing 2/95 - working. includes the shoot, dog house, compactor and yard container. Control board not included
Cram A Lot, model SC 02 30, self contained Commercial Compactor. installed 5/20/02?working. includes the shoot, dog house, compactor and 20' yard container. Control boad not included
Heli Forklift Model# CPYD25, LP, 5,000lb Capacity, 3-Stage mast, Lifts 185", 42" Forks with Side Shift, 4-Cylinder, 3.0 GM Vortec Engine, Automatic, Air Tires, Year 2007, 324 Metered Hours
Toyota Forklift Model# 5FBC25, 5,000lb Capacity, 3-Stage Mast - Lifts 185", 42" Forks, Solid Tires, with Side Shift and Battery Charger, 6,621 Metered Hours
Crown Fork Lift Side Shifter, Model SU434504, 36V, No Charger, 3-Stage Mast, 9340 Metered Hours
Crown Fork Lift Side Shifter, Model SU434504, 36V, No Charger, 3-Stage Mast, 5569 Metered Hours
Crown Forklift Model R03020-40, 36V, No Charger, 3-Stage Mast, 5877 Metered Hours
Clark C500 Y60 Hi-Lo 8000lbs Capacity, LP, 2-Stage Mast, 147" Lift Height, 48" Forks, Dual Solid Front Tires, 8305 Metered Hours
Sky Trak Telescoping Boom Lift Model 8042, 4WD, 1994-Up, Cummins Diesel Motor, 9808 Metered Hours,
Genie 745/22 4x4 with 3955 Metered Hours, Gas or Propane Powered 4 cylinder Ford Motor
Braderson Carry Deck Crane Truck BMCRTR701B, Road Runner, 4-Cylinder John Deere Diesel Engine, 55' Reach, 4-Speed Trans, 03621 Odometer Miles, 4738 Metered Hours, has some broken glass, scattered pain
Manitou Off-Road Fork Lift Truck, Model T512TC Mfg. in 1985, 2-Stage Mast with 8' Forks, 3-Cylinder Diesel Engine, 2WD
Crown RC 3000 Electric Forklift, 2750 lb. Capacity 36 Volt, 5284 Metered Hours, lift height 208"
Crown RC 3000 Electric Forklift, 3700 lb. Capacity, 36 Volt, 9,115 Metered Hours, lift height 208"
Crown RC 3000 Electric Forklift, 2750 lb. Capacity, 36 Volt, 12,184 Metered Hours, lift height 208"
Chausse Hot Tack Coat/Seal Coat Tank Trailer, Tandem Axle, Pintle Hitch, believed to be approx. 900-Gallon, All Hydraulic/PTO, Cleaned Out, Newer Paint, was Stored Indoors
1989 Pettibone Model B66-C, 3.9L Cummins Engine, 35' Boom Height, Telescoping, 6,000lbs Capacity, Diesel Engine, 13.00-24TC Tires, has a few rips in the seat, showing some rust, 5698 Metered Hours, Ti
Sky Trak model 6036-2 turbo, year: 1997, 6000 # capacity, rough terrain, 3 section boom with 36'1" lift height and 22'3" reach, 4" x 46" forks, 2723 hours on meter (new meter installed with 267 hours)
2004 Mitsubishi FE640 Sweeper Truck, Mitsubishi 4 cyl. diesel engine, 79,378 miles
1995 Ford CF 7000 Elgin Sweeper Truck, Cummins diesel engine, 167,926 miles.
1993 International 4900 Bucket Truck, International diesel engine, 86,961 miles.
1997 GMC W4500 Sweeper Truck, Isuzu OHC diesel engine, 250,982 miles
2002 Sterling Vacuum Truck, Caterpillar 3406E diesel engine, 274185 miles
2002 Sterling SC8000 Sweeper Truck, Cummins 6 cylinder diesel engine,110,350 miles
1999 GMC T7500 Sweeper / Vacuum Truck Caterpllar 3126 diesel engine, 74770 miles,
2001 Sterling L7501 Tandem Axle Vacuum / Jet Truck. Caterpillar 3126B diesel engine, 24,693 miles
1999 GMC T-7500 Sweeper/Vacuum Truck, Caterpillar 3216 diesel engine, 112911 miles.
2002 GMC W4500 Sweeper Truck, Isuzu 4 cyl. diesel engine, 174,566 miles
2006 Sterling SC8000 Sweeper Truck ,Cummins diesel engine, 46041 miles
1994 Ford CL7000 Sweeper Truck , Cummins 6 cyl.diesel engine, 105,565 miles
2006 GMC W3500 Sweeper truck, Izuzu 5.2 diesel engine, 76,532 miles
2003 GMC W4500 Sweeper Truck, NON-RUNNING. Schwarze sweeper system model 3471 with 36" dia. broom mounted on left side, powered by Isuzu 2.4 litre diesel engine IN RUNNING CONDITION.
2007 GMC W4500 Sweeper Truck, Isuzu 5.2 litre diesel engine, 70,431 miles, 4630 hrs. on truck, 3373 hours on sweeper engine
1999 GMC T7500 Sweeper Truck, Caterpillar 3116 diesel engine, 24,574 miles, NON-RUNNING, Elgin Geovac series 4 sweeper, S/N Y0254D, Intelli Touch controller, dual 30" rotary broom with mid mounted vac
Hobart model UWS 240 volt single phase food wrapping and labeling machine unit has minor cosmetic damage
Terex 2366, Year is unknown. Diesel Powered, 6F-3R Speed Gear Drive. 6x6, 6 Cylinder Deutz Motor.
Yale model GLP040ATNUAF084, approx. 4000 lb. propane powered fork lift. reading 959.1 on meter. Lift is in NON-RUNNING condition.
Komatsu propane fork lift, model FE20012W, 4000 # capacity
Daewoo propane fork lift model G20E3, 4000 # capacity.
Daewoo model G20E-3, propane powered fork lift, max lift capacity 4,000 lbs., max vertical lift 127", 4,208 hours on meter, key included, tank and forks NOT included
Nissan model PJ02A0PV, propane powered fork lift max lift capacity/vertical lift capacity unknown, 5,711 hours on meter, key included, tank NOT included, fork dimensions are 4" width x 40" length
Bil-Jax model ESP 19 24 volt rechargeable stock picker, key not included, unit has minor cosmetic damage
2009 Genie S-40 Refurbished Boom Lift, with 26 Hours since Refurbished Ford Dual Fuel Engine. New Tires, New Controls, All Systems Updated to meet 2009 Specifications, Propane or Gas
Genie TMZ-34/19 Towable Boom Lift, Manufactured 2002, 500 lb. Capacity, 24 Volt, takes 2" Ball, has cracked plastic
Broderson 8-1/2 Ton Crane, 20' Max Extend, Propane Overhead Valve Continental 4cyl Foam Filled Tires Model IC801B, Pintle Hitch, 1394 Metered Hours
Bobcat M720 Skid Steer, 5' Bucket, Newer Tires
Hyster Model s120xl, 12,000 pound x 160.0" maximum capacity L.P. Gas Forklift Truck, Overhead Guard, Hard Tires
Apache model A300AHT, 30,000 capacity fork lift with V8 engine (runs on propane), solid rubber tires, non-marking on front, 8" x 94" forks, approx. 120" max. lift height, 3886 hour on meter, (unit run
FADAL VMC6030 CNC VERTICAL MACHINING CENTER MODEL: 907-1, (1996), FADAL MODEL CNC88HS CONTROL CONSOLE, 3 AXIs OPERATION, 21 POSITION AUTOMATIC TOOL CHANGER, 30" X 60" T -SLOTTED POWER FEED TABLE, COOL
Yale Forklift, Model#GLP040AFNUAE084, 4000lbs Capacity, 3-Stage Mast with Side Shift, 42" Forks, with LP Tank, 5912 Metered Hours
Hyster Forklift, Model# S40XL, 4000lbs Capacity, 3-Stage Mast with Side Shift, 42" Forks, LP Tank
2009 Genie S-40 Refurbished Boom Lift, with 26 Hours since Refurbished Ford Dual Fuel Engine. New Tires, New Controls, All Systems Updated to meet 2009 Specifications, Propane or Gas
Genie TMZ-34/19 Towable Boom Lift, Manufactured 2002, 500 lb. Capacity, 24 Volt, takes 2" Ball, has cracked plastic
Broderson 8-1/2 Ton Crane, 20' Max Extend, Propane Overhead Valve Continental 4cyl Foam Filled Tires Model IC801B, Pintle Hitch, 1394 Metered Hours
Caterpillar Model V40 Propane powered forklift with 4000 pound max lift capacity, 158" max lift height, 24' load center, side shifter, 4" x 41" forks. 2025 hours on meter, weight 7354 lbs.
Antonino Mantello model B7 edge Machine with 170" travel
Quincy model QC25024D00002 climate controlled air compressor with approx. 200 gal. tank and 230/460 volt, 25 Hp, 760 RPM, Baldor industrial motor (in working condition) along with (1) Pyramid 2000 evo
Lincoln Impinger 2-tier commercial oven model 1132 120/208 volts 3-phase
Stoelting commercial ice cream maker model U431-409 208/230 volts 3-phase
Monarch model VMC 45B, 220/440 volt, 3 Ph vertical machining center with Dynapath Delta, 18 1/2" x 48" table, 30" X travel, 18" Y travel, 10" Z travel, chip conveyer, 4th axis, automated tool changer
Fanuc Robodrill model A-T14IA, 220/440 volt, 3 Ph, CNC drilling and tapping center with Fanuc series 16I-M controls, 19.69" X travel, 14.96" Y travel, 11.81" Z travel, 14 position tool changer, 15" x
Fanuc Robodrill model T21IFLB, 220/440 volt, 3 Ph, CNC drilling and tapping center with Fanuc 31IA5 control, 27.5" X travel, 15.7" Y travel, 12.9" Z travel, 21 place tool changer, 16" x 33" table
Sharnoa model HPM-30, 220/400 volt, 3 Ph vertical machining center with 30" X travels, 16" Y travels, 21.5" Z travels, side mounted 24 place tool changer, digital XYZ read out, 16" x 36" table (MFG. 0
Chevalier model FM-3VS, 220/440 volt, 3 Ph, 3 Hp vertical milling machine with 9" x 48" table, variable speed, 60-4500 spindle speed, Sony XY digital read out
W.F. Wells model L10, 115/230 volt, 1 Ph, 1.5 Hp horizontal band saw with 10" x 16" capacity, 1" blade, coolant
Sullair model ES-8, 220/440 volt, 3 Ph, 25 Hp screw type air compressor with approx. 100 gal. horizontal tank.
Lincoln model RL25 1236E, 110/220 volt, 1 Ph, 1 1/2 Hp, geared engine lathe with 12" x 36" capacity, 70 to 1500 RPM, 1.5" spindle,
Daewoo model G20E-3 type LP propane sit down fork lift, with a maximum load capcity of approx 4000# hours at approx 05060.5, key not included (Working condition unknown, could not test), unit appears
Yale GLP040AFNUAF084 propane sit down forklift, type LP, working condition unknown unable to test, Ignition and seat appear to have damage and in need of repair with a maximum load capacity of 4000#?s
Crown model RC3020-30 electronic rechargeable stand up fork lift, type E with cascade side shifter, 36 volt, with a maximum load capacity of approx 3960#, hours approx 10786.2
Crown model RC3020-30 electronic rechargeable stand up fork lift, type E with cascade side shifter, 36 volt, with a maximum load capacity of approx 3960#, hours approx 10625.8
Daewoo model G2DE-3 sit down propane fork lift type LP, with a maximum load capacity of approx 4000#, hours at approx 03963.6,
Komatsu model FG20C-12 sit down propane fork lift type LP, with a maximum load capacity of approx 4000#, hours approx 05656.2, key not included (Working condition unknown, could not test), seat and ig
Crown model RC3020-30 electronic rechargeable stand up fork lift, type E with cascade side shifter, with a maximum load capacity of approx 3960# (Working condition unknown, could not test), hours appr
Crown model RC3020-30 electronic rechargeable stand up fork lift, type E with cascade side shifter, with a maximum load capacity of approx 3960# (Working condition unknown, could not test), door panel
Daewoo model 620E-3 approx 4000# capacity propane powered fork lift key included, hours on unit 3170.5
Komatsu model FG 20C 11 approx 4000# capacity propane powered fork lift. key included, hours on unit 7217.7
Bil Jax model ESP19 approx 450# capacity 24 volt rechargeable stock picker lift key included, unit powers on, unit appears to work.
Crown stand up fork lift 3000 Series, 36 volt, type E key is included battery is included possibly needs repairs
Daewoo fork lift model G20E-3 type LP (working condition unknown, unable to test) repairs possibly needed, rust visible very used condition
Komatsu Fork lift model FG20C-12W type LP (working condition unknown, unable to test) propane tank NOT included visible rust and minor dents
Komatsu propane operated fork lift model FG20C-11 type LP very used condiiton (working condition unknown, unable to test) forks appear to be missing rust damage visilbe repairs possibly needed.
MEC 1632 Scissor Lift, 16ft Reach, In Working Condition
MEC 2548 Scissor Lift, 25ft Reach
Well Drilling Rig-1985 International S-1900 Well Drilling Rig, 215,634 Odometer Miles
2002 Sterling Elgin SC8000 street sweeper 29,270 Miles
MEC 2548 Scissor Lift, 25ft Reach, In Working Condition
2003 Skyjack SJ111 4626 Scissors Lift, Model SJ4626, 24-Volt, 3-Person, 850lb Capacity, 26' Platform Height, 225 Metered Hours
Fanuc S420-W Robot with R-ST Controller System, Robot Controller Type A05B-2350-BOO4, 480 Volt, 3-Phase
2000 JLG 33RTS, #2000264890 Scissor Lift, Dual Fuel, 4x4, Factory Reconditioned
1990 International 4800 x4x Utility Boom Truck, 466 Diesel Motor, 142,342 Odometer Miles, Auto Trans, 2-Door, 4x4, 50' Altec Boom with Bucket
Toyota Forklift Model 5FGL20, LP-no tank, 4,000 lb. Capacity, 2-Stage, 42" Forks, Side Shift, 18,476 Metered Hours, rip in seat
Toyota Forklift Model 5FGL20, LP-no tank, 4,000 lb. Capacity, 2-Stage, 42" Forks, Side Shift, 18,476 Metered Hours, rip in seat
1999 Woodchuck WC-17 12" Disc Chipper, Perkins Diesel Motor, 1891 Metered Hours, Pintle Hitch, Lights, Tire Tread 60%, side covers missing
1996 Sky Trak 6036, 8972 Metered Hours, Turbo, Diesel, 46" Forks, 6000lb Capacity, 36' Reach, Faded Paint, Rust, Runs and Operates
Hyster, model S50XM, year unknown, LP gas powered, side shift, motor 3.0 liter 4 cyl. Capacity 4600, hours 5077, fork length 60?, 3 stage, foot pedal forward/reverse, tape on arm rest, seat has rip, n
Hyster, model 60XM, year unknown, diesel powered, side shift, motor, ISUZU 4 cylinder, lift height 178?, capacity unknown, hours 9003, fork length 48?, 3 stage, steering wheel has rips by horn button,
Hyster, S155XL2, year unknown LP gas powered, side shift, 2 speed gear drive, motor V-6, Lift height 133?, capacity 14250, hours 1516, fork length 72?, 2 stage, side shift not working, steel 40? tank,
Caterpillar Model GP25K Hi/Low, 5,000lb 2-Stage, 44" Forks, Pneumatic Tires, LP - No Tank, Does Not Run, 9449 Metered Hours
Caterpillar Forklift, Model#GC25K, 5000lbs Capacity, 3-Stage Mast with Side Shift, 42" Forks and LP Tank, 06637 Metered Hours
Clark 3-Wheel Forklift, Model#TW25, 2500lbs Capacity, Lifts 106", 24volt with Battery & Charger, Solid Tires, 9783 Metered Hours
CAT Forklift Hi-Lo, Model #GP30, 6000LBS Capacity, Lifts 189", 3-Stage Mast, Side Shift, 72" Forks, Pneumatic Tires, 4334 Metered Hours, LP with Tank
Genie Boom Z-30/20 Heavy Duty Boom Lift, 1540 Hours, Built-In 115-Volt on Board Charger, 30' Platform Height, 500 lbs. Capacity, Tires have Tears, Boom Works, Drive Train Does Not Work
1987 Ford L8000 Vacuum Truck, Ford Motor, 94249 Odometer Miles
1997 Ford Boom Truck, 144' Reach Ford 8.3L Motor, 77,271 Odometer Miles, Manual 8-Speed Road Ranger Transmission, AM/FM, Air Brakes, Single Stack
Vermeer LM25 Cable Puller, Cable Puller Attachment Model VP25, 25 HP Kohler Gas Motor, 350 Hours
Terex SS 644C Extendaboom Forklift, 6000lbs Lift Capacity, John Deere Turbo Diesel Motor, Newer Paint, Good Tires, Broken Glass
Case W4 Articulating Off Road Forklift, 4x4, 4cyl. Diesel, 12' Fork Height, Lift and Tilt, 376 Metered Hours
1982 Condor 46N, LP gas powered, gas powered, 2X4, Hi-lo speed gear drive, motor 4 cyl Wisconsin, lift height 40?, capacity 500lbs, hours 3893, 85% tire tread left, 4? basket, foamed tired, fresh pain
Nissan LP Forklift,, Model CPH02A25FV, 3-Stage Mast, 42" Forks, Hour Meter Reads 9119, Hard Tires, 4400lbs Capacity
Caterpillar Forklift Model #GC20K, 4,000lb Capacity, Lifts 188", LP - with Tank, 3-Stage Mast with Side Shift and 42" Forks, 5797 Metered Hours
JLG Scissor Lift, Model #26-46E, 24-Volt Electric, Lifts 26'
2006 TCM Forklift, Model #FCG25-3HL, 5,000lb Capacity, Lifts 189", LP - with Tank, 3-Stage Mast with Side Shift and 42" Forks, 6408 Metered Hours
1998 Genie S-60 Boom Lift, Said to Be Refurbished in 2009, Diesel Motor, 1183 Hours, 4x4
Genie S-40 Boom Lift, Said to be Refurbished in 2009, Newer Tires, 25.4 Hours, Propane or Gas Ford Motor
2002 JLG man lift, model 3369 LE, hours 363, 48 volts, elevated height 33?, deck size 65? X 115?, platform extension 3?, wheel base 7? 6 ??, platform capacity, 1000 lbs, 21 amp automatic charger, 8-6
John Deere 482C Rough Terrain Fork Lift, 4x4, Lift, Tilt, Shift, John Deere Diesel Motor
Hyster Model KE Karry Krane 6000lbs Capacity Dual Front Wheels, Dual Rear Steer Wheels ,Propane Motor
Genie Boom Z-30/20 Heavy Duty Boom Lift, 1540 Hours, Built-In 115-Volt on Board Charger, 30' Platform Height, 500 lbs. Capacity, Tires have Tears, Boom Works, Drive Train Does Not Work
Yale Forklift Model G51P-040-CBS-U, Pneumatic Tires, 2-Stage Mast, LP (No Tank), Service Manual in (BDO), 4000lbs Capacity, 299 Metered Hours Showing
Clark ECS20 Electric Forklift with Charger, 3902 Metered Hours, Capacity 4,000#@24", 152 Max Lift, 3-Stage Clear View Mast with Free Lift, Side Shift, Non-Marking Tires, 36-Volt, GNB SCR Charger 100 M
Clark Model GCS20MB LP Forklift, 3-Stage Clearview Mast with Free Lifth, Auto Trans., Capacity 3,350# @ 24", Max Lift 188", Side Shift, Includes Tank, 42" Forks, Non-Marking Tires
Proth PSGS3060AH 12" x 24" Hydraulic Surface Grinder, 12" x 24" Electromagnetic Chuck Dresser, Power Feeds, (1996), with Coolant & Hydraulics
Lantech QX300 XL Wrapping Machine, 115volt, 50/60Hz, 64" DIA Table, G Series Controls, Variable Speed, Variable Force, Variable Roll Carriage Speed, 20" Film Poll
Lift Master, model 621-4-6 Year unknown, gas powered, 2X4, side shift, unknown speed gear drive, motor 3 cylinder, lift height 21? mast, capacity 6000 lbs, hours unknown, fork length 48?, tire approxi
1996 Multitech 2040XP Firewood Processor, powered by John Deere 4-Cylinder Diesel, Hour Meter reads 03451, Towable, Pintle Hitch Style, Sells with Towable 30' Conveyor, takes 2" Ball, Hydraulic Powere
Dreis & Krump (Chicago) Model BP0-414-6 4' Finder Brake with Multiple Fingers and Straight Rail Tool
JLG Commander 1432 Scissor Lift Model CM 1432, 14' Max Height, 500lb Max Capacity, 24-Volt
Wysong Model 1472 6' x 14ga Shear, Hydraulic Holdowns Foot Pedal
DoAll Model "16" 16" x 54" Engine Lathe, 8" 3-Jaw Chuck, Taper Attachment, Accurite Digital Read Out, Approx. 3" Hole, IN/MM Threading
Chevalier Model FSG-2A818 2-Axis Hydraulic Surface Grinder, New Approx 2003. 8" x 18" Electromagnetic Chuck with Neutrofier Sony 2-Axis Digital Read Out, Coolant
Lagun Model FTU-15 Variable Speed Vertical Milling Machine. ACU-Rite III 2-Axis Digital Readout. Power Drawbar
Clark Hi-Lo, Model C500YS80, 8000 lb. Capacity, 4-Cylinder Perkins Diesel Motor, 3800 Metered Hours, 2-Stage Mast, said to have been sitting for a couple years, runs and moves but needs brake work, ne
Toyota Forklift, Model #40-FBE15, 5913 Hours, 3-Stage, Lifts 187", 42" Forks, with Battery and Charger, 24-Volt
New Nachi Robot Model B02CH019 6-Axis CNC Material Handling Robot Maximum Reach 1370mm, Repeatability +/- 01mm, Motion Speeds 130? or 150? per Second, Maximum Payload 6 kg, 200/480 Volts, Control Uni
Caterpillar 3-Wheel Electric Hi-Lo, 3250# Capacity, 217" Lift Height, Model EP-18KT, 36 Volt, Solid Tires, 42" Forks, Side Shift, 7896 Hours
Toyota 5000# Hi Lo, Model 42-4EGC25, 106" Lift Height, Propane, 42" Forks, Hard Tires, Tank is Included
Crown Lift Truck Model 30RDTT-S, 36 Volt, 3,000lb Lift Capacity
Crown Lift Truck Model RD3520-30, 36-Volt, 3000lb Lift Capacity
Clark Walk-Behind Electric Forklift, Model ST40B, 24-Volt, 4000lift Capacity, with Mac Charger, Up, Down, Tilt, works
2008 S-130 Bobcat with Bucket, 753 Metered Hours, Hi and Lo Flow, Kubota Diesel 2.4L Motor With Cab Heate
2004 T-180 Bobcat with Tracks and Bucket, 1442 Metered Hours, Diesel
MEC Scissors Lift, Model 1932ES Manufactured 2000, Extendable Platform, 24 Volt, Max Height 18'10"
DoAll Model TF-14H Vertical Band Saw 440 Volt, 3-Phase, with 20-Gallon Hydraulic Power Unit, by Continental Hydraulics, Model 144221-F
Caterpillar Forklift Model #GP30K, 6,000lb Capacity, III Stage mast with Side Shift, with 42" Forks, Propane, Runs and Operates
Case 586E Rough Terrain Forklift, Cummins Diesel Engine, Auto Trans, 21' Mast with 48" Forks, 3857 Metered Hours
1989 GMC Diesel 7000 Bucket Truck, 8.2L Motor, 127,575 Odometer Miles
Yale fork truck model: GLC030AENEAE096 year unknown, propane Yale 4 cylinder motor, comes with tank, 3 stage side shift, forks 42", capacity 3000lbs., hours: 11836, solid tires, few nails in tires, mi
Toyota Electric Hi-Lo Forklift, Model 5FBCU25, 48 Volt, 4200 lb. Capacity @ 20", Lift Tilt Side Shift, 3-Stage Mast, Exide Gold Charger, 13596 Metered Hours
New 2010 Easy Kleen Magnum Gold 4000 PSI Pressure Washer, 15-HP Motor with Direct (3400 RPM) 12V Fully Self Contained, ? Electric Start ? Triplex plunger pump with stainless steel valves and brass man
New 2010 Easy Kleen Magnum Gold 4000 PSI Pressure Washer, 15-HP Motor with Direct (3400 RPM) 12V Fully Self Contained, ? Electric Start ? Triplex plunger pump with stainless steel valves and brass man
Electra-Saver II 40-HP Screw Air Compressor, Model ECHSHF, 460volt 3-Phase
Genie 1930 Scissor, Clean, Just Serviced, Works as it Should, 19' Platform Height, 25' Working Height, 30" Wide, Newer Batteries, 452 Hours
Clark Forklift, 8,000 lbs., Sells with Propane Tank, Model C500-YS80, Mast 86/123 Duplex, with Fork Positioner, 48" Forks
Sullair LS-12, 50HP rotary air compressor, New screw compressor and radiator installed, housing dented, 79,427 hours on meter, operating pressure 110 PSIG.
Blastcrete Model 3536 Mixer Pump, Self Contained/Kubota Diesel Motor, 2" Squeeze Pump, 9 cu.ft Mix, 12 cu.ft. Hopper, 100' of 2" 800# Hose, 200' of 1-1/2" 800# Hose, Clamps and Seals, 52 Metered Hours
Case Model 1840 Uni-Loader Skid Steer, Diesel Engine, 650x16 Tires, Lights, LED Panel, Quick Attach Bucket, 1386 metered hours.
Marvel Model 81/M25/M3M/M9 Fully Automatic Vertical Bandsaw with Chip Removal, Mitering, Power Vise,
Clausing Model 20/277 Floor Standing Drill Press, Vari-Speed 150-2000 RPM, 6" Quill Travel, T-Slot Adjustable Table, 3-phase, 460 volt.
Kaeser Model HS760, 600-HP Rotary Screw Air Compressor, 13,000 Load Hours
Bridgeport Vertical Mill, Vari-Speed, 60-4200 RPM, Power Cross Feed, Mitutoyo 2-Axis Digital Read-Out, 9" x 42" T-Slot Table, with 6" Machine Vise
Cincinnati Model 1010 Shear. 10-Gauge Capacity, Manual Back-Gauge, Stroke Counter, Foot Trip, Front Guard
2006 Nifty Boom lift 34? articulated telescoping boom max height 40 reach 20?, 12? footprint, GVW 2860, 500lb platform capacity, when stowed height 6?3?, 4?11? wide, 14? 7? length, platform size 25?x4
535 Ridgid Pipe Threader, 1/4" to 2" Pipe, Has New Seals, Rails, and Oil Pump, Has Good 1" to 2" Dies
Ridgid K-7500 Sewer Snake, 100 Volt, extra bits and 50' cable
535 Ridgid Pipe Threader, 1/4" to 2" Pipe, Has New Seals, Rails, and Oil Pump, Has Good 1" to 2" Dies
535 Ridgid Pipe Threader, 1/4" to 2"
Toyota Fork Lift, Scrubber 54" Forks LP, Hard Tires, 185" Lift, 4700 Capacity, Model 42-4F GC25, 7846 Metered Hours, Sells with Tank
Rigid K-7500 Sewer Snake, 100 Volt, extra bits and 50' cable
2006 Nifty Boom lift 34? articulated telescoping boom max height 40 reach 20?, 12? footprint, GVW 2860, 500lb platform capacity, when stowed height 6?3?, 4?11? wide, 14? 7? length, platform size 25?x4
Bandit 200, wood chipper, mid 90?s, Cummins 4.0 liter, diesel, 1804 hours, pintle hitch, 12? auto feeder, has oil pressure switch, has few minor bends
Clark Forklift, 8,000 lbs., Sells with Propane Tank, Model C500-YS80, Mast 86/123 Duplex, with Fork Positioner, 48" Forks, 2-Speed Trans, 2414.9 Metered Hours, cushion tire, electronic ignition, Has
Skyjack Scissors Lift, SJII 4626, 26' Max Height
2000 Genie GS-2032 Scissors Lift, 332 Metered Hours
Yale Forklift, Model#GLP060TENUAE86, 48" Forks, 15,386 Metered Hours, 5,000 lift capacity
TCM Forklift, Model#FG15N15, 42" Forks, 3978 Metered Hours, 3,000 lift capacity
TCM Forklift, Model# FCG25N6, 36" Forks, 8476 Metered Hours, 5,000lb lift capacity
SCMI planer, model: S520, 230 volt, 3 phaze
SCMI shaper table, model T130N, with adjustable slide table guide, 230 volt, 3 - phaze
SCMI shaper table, model T130N, with STEFF cutting head, model:2048, 230 volt, 3 - phaze
Maxtron 450 Miller Welder, 230/460V, Single or 3-Phase, with Miller 22A Wire Feeder, 400 Amp Gun
Sullair 1600 H Portable air compressor, 805 metered hrs., Detroit diesel 8V92 engine, operations flow, 1600CFM, working pressure, 150PSIG, works, has flat tire, needs batteries
2004 Caterpillar skid steer, Model 257B, Cat diesel engine model:3024c, rubber tracks, 68" wide bucket, enclosed cab, rear window is missing, side window on the bottom is missing, hour meter is not wo
1985 International Model 1954 Boom Truck, International DT-466, 7.6L Motor, 134,353 Odometer Miles, 2802 Metered Hours
Miller Arc Pak 350 Welder, with Wire Feed, 230V/460V, Single Phase
New 2010 Easy Kleen Magnum Gold 4000 PSI Pressure Washer, 15-HP Motor with Direct (3400 RPM) 12V Fully Self Contained, ? Electric Start ? Triplex plunger pump with stainless steel valves and brass man
Ingersoll Rand P-100 Towable Air Compressor, 4-Cylinder Gas Ford Motor, ,takes 2" Ball, runs and builds good air pressure
Clark American Floor Sweeper, Model #505-102, S/N:702202, LP Gas Powered, 0837 Metered Hours, New Battery
Bridgeport Series 2 CNC Mill, 3-Phase, Comes with Hard Drive and Display, Includes Extra Belts and Tooling, 48" Table, Boss 6 Controls/Digital Read-Out, Works/Operates, Floppy Drive, Worklight, Auto L
Cat Air Tire Forklift, Model #V40C 4,000 lb. Capacity, LP with Tank, 4765 Metered Hours, hydrostatic trans
1985 Kohler Generator, model 100ROZTI, 100 KW, 150.5 AMP, 277/480 Volt, 3 phase, 125 KVA, 599 Metered hours.
2000 JLG 800A, Diesel powered, 4X4, Hi-Lo speed gear drive, motor, Duetz 4 cylinder, hours 4171
2002 Genie, model Z-45/25, LP gas powered, gas powered, 4X4, Hi-Lo speed gear drive, motor: Ford 4 cylinder LRG 425 EFI, hours, 2537
2002 Genie, model S-40, LP gas powered, gas powered, 4X4, Hi-Lo speed gear drive, motor, Ford 4-cylinder, capacity 500lbs, hours 2435.
2000 JLG , model 33RTS 4X4X2, LP powered, gas powered, 4X4, Hi-Lo speed gear drive, motor, Ford 4 cylinder, water cooled propane/gas engine, lift height 33?, capacity 1500 lbs, hours 3323, tire approx
2001 Lull, model 644B-42. Diesel powered, 4X4, 4 founded and 4 reversed speed gear drive, motor Cummis 3.9 liter., hours 3116
Michael Byrne Hydraulic Power Unit, Model HPU-200,
Sullair Towable Air Compressor, Model 125-GPQ-2W-TO, 1363 Metered Hours
Michael Byrne 20" Boring Machine, Model H16-200
McLaughlin 16" Boring Machine, Model MCL-16. Sells with Misc. Bits, Rings, and Approx. (15) 4" Augers
2000 Ditch Witch JT920L Directional Drill Machine, 353 Metered Hours, 45-HP Diesel Engine, 13 GPM Fluid Flow, 182 RPM Max Spindle Speed, 12" Max Backreamer Diameter, 10' Pipe Length, 7000-10000lbs Cap
Marvel Band Saw, Series 81, Model 81-8/5m
Clark Forklift, Model #C500-120, 2-Speed Auto, 135" Lift Height, 12,000 lb. Lift Capacity, LP, 814 Metered Hours
Skyjack Scissors Lift Model 4626, 850lb Capacity, 26' Height, Extendable Platform
Fanuc S-420IW Robot with 1997 R53 Controller, Robot Model# 022/1500, R-J2 Controller Model# F-31999 with Teaching Pendant
Euromac Variable Angle Notcher, Model:AV220-6, 220/480 volt
Enco vertical mill, model #100-1520, MFG date 1995, 240/480 V, 3 phase
1999 Genie 65 2668-1C Man Lift, Kubota Gas, Dual Fuel Engine, Propane or Gas, 3102 Hours, 4x4. Lift was rebuilt by the factory in 2007
2001 Skytrak 8042, 01042 Metered Hours, 42' Reach, 8000 lb. Capacity
Deckel FP42NC, X45 x Y18 x Z18, Vertical and Horizontal Mill, Delta 20-Control
Clausing Kondia CNC FV-1 Machine, Y12 x X24 x Z5, Delta 20 Control
Chevaliar Knee Mill Model FM-63K, Y16 x X32 x Z7, Delta 40-Control
Pro-Form Pipe Bender, Proformer II, 230 Volt, 5hp, 3-phase, with Manuals, Dies of Misc Sizes
Bandit Towable Chipper, Model 90 Ford Motor, 1074 Metered Hours, 2-5/16" Ball
Upright X26N 6528, 7' Extendable Platform, no power, dead battery
ARPAC EZ-Load Shrink Wrap Machine, Model PR04002-1D,120volt, Manufactured in 2008, 4000lbs Capacity, appears to have little use.
New 2010 Easy Kleen Magnum Gold 4000 PSI Pressure Washer, 15-HP Motor with Direct (3400 RPM) 12V Fully Self Contained, ? Electric Start ? Triplex plunger pump with stainless steel valves and brass man
Case 530 Construction King Forklift, Runs, Main Lift Cylinder Leaks
1995 Ford F-Series Utility Truck with Man Lift, 7.5L V8 Motor, 140,942 Odometer Miles, 5-Speed Trans
Cincinnati model #9 Press Brake 225 ton x 10' long capacity, came out of operating shop where is was used as a punch press, works
Cincinnati model#14 Shear 3/16" x 10' long capacity, push button adjustable back stop, came out of operating shop, includes one extra re-sharpened shear knife, works
Tennant 550 Scrubber Vac, Continental Gas Engine, 1240 Metered Hours, Needs New Brushes
Toyota Electric Hi-Lo Forklift, Model 5FBCU25, 48 Volt, 4200 lb. Capacity @ 20", Lift Tilt Side Shift, 3-Stage Mast, Exide Gold Charger, Counter Weight is not Secure to Unit, Non-Working Condition
TB 420 Snorkel Lift, Model #TB-A420RFO, LP Gas or Gasoline Fuel, 33' Reach, 42' Platform Height
2002 Legacy Series Sky Track, Model 6036, Cummins 3.9L Diesel Motor, 2952 Metered Hours
1999 Peterbilt 357 Logger Boom Crane, 3406E CAT 550 HP Motor with a Overhaul on 04-21-08. ECM Miles 473,000, Odometer Miles 419,700
Yale Fork Lift, Model# GLC030AENVAE, 11,823 Metered Hours, 3000lbs Capacity, Propane, the Mast is 96/225 with Side Shift & LBR, 48" Forks, Hard Tires (fronts are non-marking), New Paint, Seat with Sea
Fanuc Robot S-420iw with RJ3 Controller
Genie Model PL1-30P Personal Lift, 30' Platform Height, 36' Working Height, New Battery
Mec Electric Scissor Lift, Model 2034HT, Built-In Charger, Works, 20' Platform, 26' Working Height, 34" Width, Runs & Operates Good Tires
Toyota Fork Lift Truck, Model 42-6FGU15, 3-Stage Mast, 266.1 Metered Hours, Side Shift, 3000lb lift capacity. Pneumatic Tires, Lift Height 189", 42" Long Fork, 83" tall to top of mast.
Caterpillar Lift Truck, Model M100B, 36-Volt, 10,000 lb. Max Capacity, 7444 Metered Hours
JLC 1932E2 Scissors Lift, Extendable Platform, Built-In Charger
Snorkel Scissors Lift, Model SL-20, Extendable Platform, Electric with built-in charger
Pettibone B66 Lift, 6000lbs Capacity, 36' Reach, 9781 Metered Hours, has scattered paint chips, the tires are a little weathered, has other normal wear
Cantek SRS 300 Straight Line Ripsaw, Model SRS 300, 3-Phase, 12" Blade, Fence with Maint Box.
Busy-Beaver Model 175 Chipper, Kohler Engine, 2" ball
Hypertherm Power Max 1000, G3 series plasma cutter, 200/480 volt, 3 phaze
Euromac Variable Angle Notcher, Model:AV220-6
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Miller, syncrowave, Tig Runner, MOD:250DX, 230/460 volt, 1 phaze
Case Comfort King 730 Tractor, Gas, Cab, PTO, 3-Point Hitch, Rear Hydraulic Remotes, 6289 Hours, Missing Some Glass on Cab, other windows cracked
6044 Pettibone All Terrain Forklift, 4x4, Extend-A-Boom, 2000 Diesel, 4 Wheel Steering, New Rubber, Serviced by Giar & Sons, 5689 Metered Hours, Maximum Lift Capacity 6000lbs (2722kg), 44' Max Lift He
1998 Lift King 4x4 Forklift, Model LK12ML42, 14' Lift Height, Diesel, Cab, Shuttle Shift 4-Speed Trans, Hydraulic Fork Positioner, 8' Forks, 12,000# Capacity, Unit Weight is 15,000# 5029 Metered Hours
Hyster Forklift, Model# J40XMT, 4000lbs Capacity, Lifts 189", 3-Stage Mast, Non-Marking Tires, with Battery Charger
Hyster Yard Type Forklift, Model# H50XL, 5000lbs Capacity, with LP Tank
Clark Forklift, Model#C500S80, 8000lbs Capacity, Lifts 170", 3-Stage Mast, Double Auxiliary Valve, Dual Fuel with LP Tank
1997 Fanuc 420i Material Handler Robot, 480volt, 3-Phase, RJ2 Controller
Commander Johansson Radial Drill Style 6790, A-Size, 440volt, 440volt 3-Phase, 1-3/4" Capacity, 2-1/2' Arm Length, MFG 1975
Bil Jax Work Force XLB-4725A Electric Towable Manlift, with Outriggers, 175 Metered Hours
1998 Genie Boom, Model Z-45/22. LP gas powered/gas powered, hydrostat drive, 4X4, Motor Ford 4 cylinder gas engine, hours 3899 hours, Capacity 500lbs, maximum height 45 feet, maximum reach 23 feet, sc
Atlas Copco 2006 Air Compressor, Runs, Model XA597(JD), 2.4 Diesel
1997 Daewoo /Grove truck mounted crane model: DTC21, max lift capacity 21 ton, four section boom 28?-94?, tele. Box JIB, Daewoo DE12Ti diesel engine, four outriggers-maximum span 19?, 24 volt electric
2000 JCB 532, All Terrain telehandler/forklift, 3542 Hours, JCB 3.9 Ltr, 4 cylinder turbo diesel engine, power shift transmission, 4 speed forward and reverse, 4 WD, front wheel, four wheel and crab s
1999 Freightliner, Model FL60 24? Box truck, Make of motor Cummin Diesel 5.9 liter, 6 cylinder, horse power 215 hp, and estimated miles 173,000, (123789 on odometer). Manual 6 speed, Cruise, AC, AM/FM
Tennant Model 465 Walk-Behind Self Propelled Floor Scrubber, 36 Volt, Works, Recently Serviced, Includes Batteries, 110 Volt AC Single Phase Input x 36 Volt DC Output Charger and Operator manual, 1263
Raymond Electric Straddle Reach Truck, Model# 21-R40TT, 3-Stage Mast, 85 Down, 180 Up with 36" Forks, 36volt, New Caster Wheels & New Handle Grips, 4000# Capacity, 1112 Metered Hours
Mitsubishi FG30 Propane Forklift, Hard Tires, 11829 Metered Hours, Runs, 6000# Capacity, 48" Forks, S/S, Dents on the engine cover, scratches
Grove 26-33E Electric Scissors Lift, Runs & Operates, no Brakes. Built-In Charger System, Platform Extensions
Ford 5610 Tractor with 5' Slide Wing Mower, 3-Point, PTO, ROPS, 4-Speed Trans with Hi-Lo Range. Has scattered paint chips, some surface rust, worn right rear tire, missing cap to one of the hydraulic
Farmhand 817 Grinder Mixer, has a Magnet on the Grinder with Screen
2009 Easy Kleen Magnum 4000, 4000 PSI Hot Water Pressure Washer (Unused)
2009 Easy Kleen Magnum 4000, 4000 PSI Hot Water Pressure Washer (Unused)
Mayville scissor lift model: MEC 2548HT 36 volt, hours unknown, capactiy 850, lift 24', deck approx. 8'x4', side damage, drop down platform, scattered scratches, nick & dents
TCM Forklift, Model #FCG28N6, 5,000 lb. Capacity, 4-Stage, Lifts 240", LP, 6958 Metered Hours
Hyster Forklift, Model #H110XL 11,000 lb. Capacity, New Dual Air Tires, Heated Cab, Gasoline, Lifts 197", 3-Stage, 48" Forks with Side Shift, 8855 Metered Hours, cracked windshield
JLC Scissors Lift, Model 2032E2 20' Platform Height
JLG Scissor Lift Model #3246 E2. 32' Platform Height, 2' Extension
JLG Scissor Lift Model#2646 E2, 26' Platform Height, 2' Extension
Fanuc Robot S-420iW Material Handling with R-J2 Controller, 480V, 3-Phase, Manufactured 1997
Morbark Timber Shear, Removed from Hydro-Ax, Can be Mounted on Excavator, Bobcat, Loader, Etc., No Broken Welds, All Hydraulics Work
Skytrak 6036 Extenda Boom Forklift, Diesel, 3-Speed Trans., 4x4, New Tires, Paint has Been Torched Up, 48" Forks, 5' Wide Carriage
MEC 33RT Scissors Lift 33" Platform, Gas, 4x4, Hydraulic Outriggers, 12 Volt, No Brakes, 2302 Metered Hours
Caterpillar ASV RC-30 Skidsteer, R-Series, Heated Cab with Quick Attach Forks, 1/4 Yard Bucket, Rubber Tracks, 1256 Hours, diesel
Clark Model C500135, 13.100 lb. 10 ft. 24?, 10,900lb. Lift 30?, 2 stage, side shift, 5? forks, L.P. gas, hour meter reads 698 hours, seat ripped
2009 Easy Kleen Magnum 4000, 4000 PSI Hot Water Pressure Washer (Unused)
2001 Genie TMZ 34/19 Towable Boom Lift, Electric, Manual Down Rigers
2000 Ingersoll Rand 185 CFM Air Compressor, John Deere Diesel Motor
1991Komatsu FG25-11 Fork truck 46? forks, side shift, 3 stage 170 mast, 93 hours metered, actual unknown
Edco GMS20-13H Block Saw, 13-HP Honda Gas Engine,20" Blade, Approx. 2-Years Old
Bobcat 720 Rubber Tire Skid Steer, Hydrostat Foot Controls, 2812 Metered Hours, Tires have Good Tread but show weather cracks, Wisconsin 4-Cylinder Gas Engine, 60" Bucket, Quick Attach, sometimes the
1998 Genie S-40 Boom Lift, 4x4 40' Cap, 4798 Metered Hours, Diesel Motor
Caterpiller ASV RC-30 Skidsteer, R-Series, Heated Cab with Quick Attach Forks, 1/4 Yard Bucket, Rubber Tracks, 1256 Hours, diese
Cleaver Brooks model CB 200-200, 460 volt, 3 Ph, 200 Hp, 15 Amp, 150 max. pressure PSI, natural gas powered packaged boiler, Mfg. 12/11/87, Input 8369000 BTU/hr. includes (1) approx. 100 gal feed wate
Atlas Copco model GA 37 AP, 132 PSI max. final pressure,220/440 volt, 3Ph, 50 Hp, 3600 R/Min. air compressor
Ludell model DC2200, 220/440 volt, 3 Ph, 750 min. BTU/Hr. input, 2200 max. BTU/Hr. input ultra efficient water heater with power flame burner, model CR2-G-20A, 220/440 volt, 3Ph, 5 amp, 3/4 Hp gas pow
Consolidated model 400G, 220/440 volt, 3 Ph, 400 # dry weight capacity, 2,700,000 max. BTU input, natural gas, 31 Hp laundry drying unit
Norman model 123H, 575 volt, 3 Ph, 400 # dry weight capacity dryer unit, (MFG. 8/26/88) includes transformer
TWashex model 600 FLA-P4, 220/440 volt, 3 Ph, 600 # capacity laundry washing unit with 60 # PSI max. water pressure, 100 # PSI max. steam pressure, 90-100 # PSI compressed air, (MFG. 1972) includes (3
Washex model 600 FLA-P4, 220/440 volt, 3 Ph, 600 # capacity laundry washing unit with 60 # PSI max. water pressure, 100 # PSI max. steam pressure, 90-100 # PSI compressed air
Washex model 46/110 FLA-P4, 220/440 volt, 3 Ph, 700 # capacity laundry washing unit with 75 # PSI max. water pressure, 100 # PSI max. steam pressure, 90-100 # PSI compressed air,
Caterpillar (CAT) model GC25K, 4350 lb capacity propane powered fork lift with 188" max. lift height, 4" x 42" forks, side shifter, solid rubber tires with non-marking rear tires, 4909 hours showing o
Komatsu model FG30HT-12, 6000 lb capacity propane powered fork lift with 138" max. lift height, pneumatic tires, 5" x 48" forks, 1558 hours showing on meter, (does not include propane tank, unit is in
Nissan model N015110, 48 volt, WITH CHARGER, 3200 # capacity, 3 wheel electric fork lift with 180" lift height, 4" c 42" forks, side shift attachment, single stick lift and tilt, 6588 hours on meter
Champion model VR10-12 commercial air compressor with tank , hours on unit 4479.4 and (1) Champion model CRN75A1 115 volt single phase compressed air dryer
Masterstone 4000 CNC with 13' long x 88" table, Masterstone control unit with Osai numerical controls, (4) separate air manifolds, (14) tool holders on either end (MFG. 2001) includes air lifting mech
Camma model FRESA-A-PONTE 16" master saw (programmable bridge saw with approx. 14' travel) with programmable guide laser, hand held remote, control center, 5 extra diamond blades, (MFG. 2002), (1) 16
Elephant model GRU-A-BANDIERA approx. 1000 # capacity lift with 18' fully extended arm (MFG. 2002)
Atlas Copco model GX22, 30 Hp, 220 volt, 3 Ph, air compressor with approx. 100 gal. tank and 5821 hours, and (1) Atlas Copco model FD60 air dryer (may need minor repairs) (air compressor in working co
Hyster model S80B 8,000lb capacity Fork Truck, with triple stage mast, LP Gas, runs and works
Clark model C500HY40 4,000lb capacity Fork Truck, single stage mast, LP gas, with a boom, pneumatic tire, runs and works
CAT model V40B 4,000lb capacity Fork Truck, LP Gas, pneumatic tire, single stage mast, runs and works
Solar Gas Turbine Gen Set. Model# T-1020S-8A 600V,60 CY,Cat Engine,726 Hrs
Yale Electric Fork Truck Type E, Model# ERC080HDN36SE084
DoAll Hydraulic Auto Horizontal Bandsaw, Model# C-5A 10" x 16" Capacity With Bar Feed Table
South Bend Lathe, Model# 440 8" x 60" Capacity, 2" Spindle Hole, Inch & Metric Threading 1800 RPM GAP, 12" - 3 Jaw Chuck
Taylor Winfield Spot Welder, Model# 68321, Type ENC 12-75 Air Operated, KVA 75 V 220, 19" Throat Foot Pedal Control
Onan Diesel Electric Gen Set, Model# 200.ODFP-17R, Time Rating-Stand By HZ 60, RPM 1800, KW 200, KVA 250, 3 Phase, V120/208 A694, V127/220 A
Norton (Warner & Swasey) Plain O.D. Grinder, Model# LCTU, 20 HP Spindle, 26" Grinding Wheel, Wheel Guard Dresser, Pick Feed Truing
Niagara A-60 Press, 60 Ton 4 Inch Stroke 100 SPM
Niagara A-60 Press, 60 Ton 4 Inch Stroke 100 SPM
Niagara 43 Ton O.B.I. Press, 5 Inch Stroke 85 SPM, Air Clutch
Niagara 43 ton O.B.I. Press 5 Inch Stroke 85 SPM, Air Clutch
Nachi Red Ring Gear Roller, Model# RGA, Duel Die System, Auto Parts Loader
Moore G-18 #3 Jig Grinder
Minster O.B.I. Press, Model# TR-24-2F-AU 60 ton 6" Stroke, 36" Bed, Light Curtains, Palm Button Controls, Wintriss Clutch/Brake Control
Marvel Vertical Bandsaw, Model# MV525APC,1 5/8" Blade Width, Auto Tilt, Auto Double Grip Bar Feed
Littell Coil Cradle & Straightener, Model# 852-5PD Cradle - 72" Max Diameter 50" Max Width, Straightener - .250" Max Thickness 52" Max Width, 40000# capacity, Peeler Attachment
Kearney & Trecker Horizontal Mill Machine Model# 630 TF-20, 19.5" x 114" T-Slot Table, 1500 Max RPM, Hartford Super Spacer, 12" Diameter Right Angle Table Attachment
Femco Drill, Model# WRD 50/1500 5' Arm 15" Column, Power Elevation 40 to 1920 Spindle RPM 7.5 HP, Coolant, 18" x 26" Two Sided Box Table, MFG. 1980
Devlieg 3B Jig Mill 3" Spindle36" x 60" T-Slot Table, Sony 3 Axis Digital Read Out, 48" Vertical Travel
Devlieg 3H-72 Spiralmatic Jig Mill Spindle, 35" x 72" T-Slot Table, Sony 3 Axis Digital Read Out
Cincinnati #6 Vertical Mill 1400 Max RPM, 20" x 104" Table, 40 HP
Chicago 225 ton Mechanical Press Break, Model# 506-D, S/N F-3819, 96" Capacity
Calavar Condor 68 Man Lift with Wisconsin Motor Model# VG4D for use with Gas or Propane. Max Platform Height 744 Inches, Max Horizontal Reach 600 Inches, Rated Load Radius 582 Inches, Hydraulic Operat
Magnaflux, Model# A-940L Control Circuit 115 Volts, Max Sec. Volts 19 AC, Max Output Amps 4000, Duty Cycle @ Max 5 Sec. On - 20 Sec. Off, Single Phase 460 Volts 50/60 Hertz, 98" Max Capacity
Raymond model EASL, 3000 # capacity, 24 volt electric stand up fork lift with 192" max. lift height, 4" x 42" forks, (hours unknown)
Drexel model SL-44-3-ESS, 36 volt, 3000 # capacity electric fork lift with 180" max. lift height, 4" x 48" forks,90 degree mast for side loading (hours unknown)
Schreck model RRH-S-E, 36 volt, 4200 # capacity stand up fork lift, 2 stage mast, scissor out fork attachment, side shift attachment, 30' max. lift capacity, 333 hours on meter
Cleveland model SD2-130-60-32, 130 ton capacity straight side double crank press, with air clutch, dual palm controls, 12" stroke, 6" adjustments, 25" shut height, 20 SPM, 60" x 32" bed area (MFG: 196
Cleveland model 80D-96-300, 300 ton capacity straight side double crank press, with air clutch, palm controls, tie rod construction, 14" stroke, 25" shut height, 17 SPM, 50" x 96" bed area, 20" window
Armstrong-Blum (Marvel) series 8, model MARK-1, 230 volt, 3 Ph, vertical band saw. Includes (1) adjustable height steel stand.
Kent model KRD3050 radial arm drill with approx. 6' arm, 15" column and box table
Apex Kent model KGS-510A11, 440 volt, 3 Ph 3600 RPM, 12" diameter surface grinder with a 39" x 19 1/2" chuck, (MFG. 1993), (1) 24" width x 4 1/2" height x 24" depth Starrett Crystal Pink surface stone
SuperMax model LG1643 engine lathe 440 volt, 3Ph with approx. 16" swing, 63" bed, chip tray variable speed, over head light, tailed stock, 8" diameter 3 jaw chuck and foot controls
Lagun Republic model FTV-2S vertical milling machine with a Sony digital axis readout, 50" table, 6" machinist vice and various tooling
Okuma model MC60VAE vertical machining center with 5000 RPM spindle, 50 taper, 20 ATC, 59.06" x 24.8" x 24.02" travels, chip conveyer and OSP 700M CNC unit
Hurco model BMC4020HT/M vertical machining center with 8000 RPM spindle, 24 ATC 40" x 20" x 24" travels full enclosure, 40 taper and Ultimax 4 dual screen CNC unit, (MFG. 1998). Includes (2) 8" Kurt m
Depo model MCTV-125EZ, 400 volt, 110 amp CNC vertical machining center dual pallet type, with (2) 23 x 51" pallets, (2) 16 position ATC, Heidenhaim CNC control, chip conveyor, power feed vertical head
Mitsubishi model M-V70E, 480 volt, 90 amp CNC vertical machining center with 23 3/4" x 47 1/4" table, (overall travels: X axis 49.13", Y axis 27.57" and Z axis 25.62"), 40 position ATC with TSUDAKO mo
Mori Seiki model SV-500 B/50, 460 volt, 3 Ph CNC vertical machining center with 23 1/2" x 52" table, (overall travels: X -axis 40", Y axis 20" and Z axis 20"), 30 position ATC, chip blaster high press
Mori Seiki model SV-500 B/50, 460 volt, 3 Ph CNC vertical machining center with 23 1/2" x 52" table, (overall travels: X -axis 40", Y axis 20" and Z axis 20"), 30 position ATC, chip blaster high press
Hurco model OEM-50, 460 volt, 3 Ph CNC vertical machining center with 27 1/4" x 66 1/2" table, 20 position ATC, ultramax 3 dual screen CNC control
Kent model KGS-410AHD, 440 volt, 3 Ph, 3 Hp hydraulic surface grinder
Gallmeyer & Livingston Grand Rapids model 450, 440 volt, 3 Ph, 12" x 24" hydraulic surface grinder with incremental down feed
Kent model KGS-410AHD, 440 volt, 3 Ph, 3 Hp hydraulic surface grinder, 15 3/4" x 39 1/2" electromagnetic chuck, over wheel dresser
Lucas model 42B, 220/440 volt, 3 Ph, 20 Hp, 5" table type boring mill with 48" x 86" table, 9 - 1200 RPM
Clausing Kondia model FV-1 variable speed 440 volt, 3 Ph, vertical milling machine with 12" x 48" power feed table and Newall Sapphire 2 axis DRO,
Condor/Calavar model 2035 battery powered scissor lift with 750 lb lift capacity
Raymond model 4-D, 24 volt battery powered fork lift 4000 lb lift capacity 247" max lift height 4" width x 40" height forks
Adige model TT640, 220/440 volt 3Ph saw unit, capacity of O.D. 8mm to 80mm with a max. cutting length configuration of 1500mm - 3000mm - 4500mm with 18' over/ under carriage system.
Tru-Cut #ES-H-500, 220/440 volt, 3 phase, Tube Cutting SystemTube. O.D.: 1" - 3" Tube Wall Thickness:: .03 - .125" (7% of Tube O.D.) Cut Length:: 20" (Using Exit Conveyor) Cut Length w/ Tru-Motion Off
Dake model 6-450, 50 ton hydraulic press.
Daewood propane forklift model G20E-3 type PL mast type FFL tire type S
Bil Jax scissor lift model ESP19 115 volt (working condition unknown)
Daewoo model G20E-3 propane powered ride-on fork lift max lift capacity 4,000 lbs max vertical lift 127" fork dimensions 4" width x 39 1/2" length unit shows 4,920 hours on meter key and propane tank
Yale model GLP040AFNUAF084 propane powered ride-on fork lift with max lift capacity 4,000 lbs max vertical lift 128.7" fork dimensions 4" width x 42" length unit shows 6,906 hours on meter key is incl
Yale model GLP040AFNUAF084 propane powered ride-on fork lift with max lift capacity 4,000 lbs max vertical lift 128.7" fork dimensions 4" width x 42" length unit shows 4,940 hours on meter key is incl
Yale model GP040AFNUAF084 propane powered fork lift with maximum lift capacity 4.000 lbs and maximum vertical lift 129" fork dimensions 4" width x 42" length unit shows to have 2,130 hours on meter ke
Yale propane powered forklift model GLP040AFNUAF084 , visible of rust and dings/dent over all fair condition, solid tires
Crown stand alone fork lift model RC3020-30 model E 36 volt key is included
Crown stand alone fork lift model RC3020-30 model E 36 volt key is included unit appears to be in working order possibly needs to be serviced and/or repaired
Crown stand alone fork lift model RC3020-30 model E 36 volt key is included unit appears to be in working order possibly needs to be serviced and/or repaired
Genie model GS1930 scissor lift very used condition minor dents visible maximum working height 25 ft maximum platform height 19 ft system voltage is 24 volts
Genie model GS1930 scissor lift used condition minor dents visible maximum working height 25 ft maximum platform height 19 ft system voltage is 24 volts
Nissan model PJ02A20PB type LP sit down propane fork lift with a maximum load capacity of 3360# (Working condition unknown, could not test), appears to be in need of repair, hours unknown, unit does n
Nissan model KAPH02A25PB type LP sit down propane fork lift with a maximum load capacity of 4350# (Working condition unknown, could not test), appears to be in need of repair, hours unknown, unit does
Daewoo model G20E-3 4000# load capacity gas powered fork lift (Working condition unknown, could not test), appears to be in need of repair, hours unknown, unit does NOT include key
Yale model GLP040AFNUAF084 approx 4000# capacity propane powered fork lift key not included, unit requires repair, some corrosion noted, forks not included
Nissan model KAPH02A25PV approx 4000# capacity propane powered fork lift hours on unit 6373.8, key not included, some corrosion noted, unit requires repair
John Bean model EHP SYSTEM IV rim clamp tire changer, unit appears to be complete unit and in like NEW condition,
Komatsu Air tire Forklift, Model #FG20-11. Nissan LP gas engine, single speed manual transmission, 42 in. forks, 128 in. lift height, 4000 lbs. capacity, 9344 hours on meter, new tires and recent pai
Acura Seiki model VMC B100B, 50" x 100" CNC vertical bridge mill, 46" x 100" table, 50"; between uprights, 100" X axis, 50" Y axis, 20" Z axis, 27" max. height under spindle, 20 position ATC, Mitsubus
Acura Seiki model VMC B100B, 50" x 100" CNC vertical bridge mill, 46" x 100" table, 50"; between uprights, 100" X axis, 50" Y axis, 20" Z axis, 27" max. height under spindle, 20 position ATC, Mitsubus
Fadal model 8030 CNC vertical machining center with 80" X axis, 30" Y axis, 34" Z axis, travel 30" x 80" table, 40 taper spindle, 21 position ATC, flood coolant, Fadal CNC 88 control (MFG.1992)
Mustang C-32 CNC vertical machining center, 18" x 43" table, 32" X axis, 20" Y axis 24" Z axis, travels cat 40 taper, Vickers/Siemens Acramatic 2100 CNC control with control wand manufactured in 07/20
Ingersoll Rand model 2475N7.5, 230 volt, Single phase, 7.5 Hp industrial 2 stage air compressor with 175 psi maximum pressure and 80 gal. tank.
Hobart commercial meat grinder model MG2032 208 volt 3-phase
True model GDM-72 115 volt single phase retail food display refrigerator
Hussmann model RM-4 120 volt 17 door retail food display refrigerator, comes in 4 parts, left and right end cap units included
Hussmann model RM-4 120 volt 17 door retail food display refrigerator, comes in 4 parts . left and right end cap units included
Corob model TATOCOLORVL 115 volt electric paint mixer at approx 37 1/2" width x 51" height x 24" depth (Working condition unknown, could not test), unit appears to be in need of repair
Webber MT, Model CF-2 plate compactor with a 6Hp. Subaru gas engine
2007 Atlas Copco, model XAS375 T# towable 123 PSIG/375 CFM air compressor. with a 4.5 ltr. Diesel engine, computerized controls, requires 2" ball and 120 hrs on digital meter in Like New Condition
Ingersoll Rand towable 185 CFM air compressor, 1983, JD Diesel with pintle style hitch (runs)
Champion model VR10-12 10 horsepower, 120 gallon vertical tank 460 volts air compressor
1996 International 4700 boom truck, 230 hp DT466 diesel engine, automatic transmisssion, GVW 27,500 lbs. 297,800 miles, 42ft. TECO single man bucket, 2 hyd. outriggers, upper boom has cracks in the fi
Pelton & Crane model 2120 dentistry chair with foot controls, overhead dentist light, delivery systems with touch pad controls, lights, J-boxes, left/right delivery, Kavo Fiber Optics, assistant stati
Pelton & Crane model 1585 dentistry chair with foot controls, overhead dentist light, delivery systems with touch pad controls, lights, J-boxes, left/right delivery.
Coats model 5060AX tire changer, unsure if all parts are present
Yale model GLC0LCNSBE085 propane powered fork lift with 8000 # max. capacity, 185" max. lift height, 6" x 48" forks, 9709 metered hours, hard rubber wheels, (non marking tires on rear)
W.F. Wells model W-9-1A1, 230/460 volt, 3 Ph horizontal band saw with semi-automatic, 8" x 16" capacity, dual vertical column, auto-feed, coolant, 20" x 10' , 6" stock feed table with analog controls
Worthington model BN, 230/460 volt, 3 Ph, air compressor with 20 Hp motor and approx. 80 gal. capacity tank
Comp Air model CL25SS/BP, 460 volt, 3 Ph air compressor with 25 Hp motor, 110 max. PSI. Includes (1) approx. 100 gal. capacity holding tank
Cincinnati Bickford 220/440 volt, 3 Ph radial arm drill with 9" diameter column, 3" arm, 180 to 1500 RPM power down feed spindle, 13" x 18" 24" t-slotted riser table
Bridgeport model VMC760-16, 220/440 volt, vertical machining center with approx. 6000 RPM BT40 spindle, 19" x 39 1/2" table, 16 position automatic tool changer, Bridgeport DX-32 control, full enclosur
Bridgeport 220/440 volt, 3 Ph series 1 vertical milling machine with 2 Hp, 60 to 4200 RPM spindle, 9" x 42" table, 2 axis acu-rite digital read out, setup gear
Bridgeport 220/440 volt, 3 Ph series 1 vertical milling machine with 2 Hp, 60 to 4200 RPM spindle, 9" x 42" table, 2 axis acu-rite digital read out, setup gear, 6" machinist vice
Bridgeport 220/440 volt, 3 Ph vertical milling machine with 1 1/2 Hp, 60 to 4200 RPM spindle, 9" x 32" table, 2 axis acu-rite digital read out, 6" Wilson machinist vice
Yale model SEC030ABN24SE083, 24 volt electric fork lift with 3000 # max. capacity, 190" max. lift height, 4" x 42" forks, side shift, 911 metered hours, hard rubber wheels, (1) GNB model FER100 12-475
Methods model SLANT50, 480 volt, 3 Ph CNC turning center with approx. 3500 RPM spindle with 3 jaw chuck, hydraulic tail stock, 10 position turret, yasnac LX3 CNC control, full enclosure, foot peddle,
Methods model SLANT50, 480 volt, 3 Ph CNC turning center with approx. 3500 RPM spindle with 3 jaw chuck, hydraulic tail stock, 10 position turret, yasnac LX3 CNC control, full enclosure, foot peddle,
Dake model 50-H, H frame press, 50 ton, manual, 12" x 32" adjustable height bed, free standing
Okuma type LS, 480 volt, 3 Ph, geared head engine lathe with 22" swing, 56" center to center, 23 to 1200 RPM, 1 1/2" diameter though head spindle, saddle with tool post, tail stock, chip pan, 3 jaw ch
Hansford Davis model 5, 480 volt, 3 Ph keyseater broach, 20 1/2" x 30 3/4" t-slotted table, single verticle broach, clamps, bat guide, free standing unit.
Shearp model 1760K, 220 volt, 3Ph geared head engine lathe with 17" swing, 60" center to center, 50 to 1800 RPM, 2" diameter through head spindle, saddle with tool post, tail stock, chip pan, back spl
Stoelting model U431-309 208/230 volt 3-phase ice cream maker with lower freezer storage and attached mixer
Middle by Marshall model PS536 208 volt 3-phase stackable conveyor ovens on locking casters with digital temp control
Coats model 5060AX rim clamp tire mounter unit appears to be in fair condition
Komatsu FG 20c-11 sit down propane forklift 4,000 lb capacity hours unknown
Crown model RC3020-30 approx 2500# capacity 36 volt electric forklift key not included, battery not included, unit has minor damage
Komatsu model FG20C-12W approx 4000# capacity propane powered forklift some corrosion noted, key included, unit has minor damage
Nissan model MPL02A25LV approx 3150# capacity propane powered forklift some corrosion noted, key not included, driver guard requires repair, drivers seat has minor damage
Komatsu model FG 20C 11 approx 4000# capacity propane powered forklift some corrosion
Yale model GLP040AFNUAF084, approx 4000# capacity propane powered forklift some corrosion noted, key and folks not included, drivers seat is damaged
Genie model GS-1930 aerial platform lift maximum height 25 ft maximum platform height 19 ft maximum capacity weight 500 lbs 24 volt batteries included
Hobart model 0300 115 volt single phase mixer, comes with bowl and attachments, unit has minor damage (Working condition unknown)
Hyster model H60XL, 5450 # capacity propane powered fork lift with 177" max. lift height, 5" x 42" forks, side shift attachment, solid rubber tires, 4540 hours on meter (in working condition - has new
Yale model GLP080LJNGBE089, 7600 # capacity, propane powered fork lift with 185" max. lift height, 5" x 48" forks on rotating carriage, solid rubber tires, (hours on meter unknown)
Hyster model H80XM, 8000 # capacity propane powered fork lift with 173" max. lift height, 5" x 47" forks on rotating carriage, solid rubber tires, (hours on meter unknown)
Mercier-Freres model MSX-6, 480 volt, 3 Ph splitter with dust collector
Scimatic model MSX-6 & Mercieer splitter station both with 3 Ph electrical motor
Crown upright forklift RC3000 series truck type A.
Crown model RC3020-30 approx 3000# capacity 36 volt rechargeable stand up fork truck hours on unit 7188.4, unit works
Komatsu, Model FG205HT, 5830 lb capacity propane powered fork lift, with 3 stage mast (183" max lift height) side shift, hard rubber tires,
Komatsu, Model FG15ST15, 3480 lb capacity propane powered fork lift, with 3 stage mast (188" max lift height) side shift, hard rubber tires, 10375 hours on meter, in running condition.
Komatsu, Model 15ST15, 3000 lb capacity propane powered fork lift, with 3 stage mast (170" max lift height) side shift, hard rubber tires, 1356 hours on meter, in running condition.
Cumberland, model B-29, 3 knife, open rotor, 100 hp. Granulator
ERMAFA model E2.125 GI co-rotating, extruder with Keller model E2.12+24-0 transmission, VEM 750 Hp, 440 volt DC drive motor, transformer and control panels, barrels and spare parts
Sterko 35 ton chiller unit with outside heat exchanger unit.
Cumberland B-37, 3 knife open rotor, 150 Hp granulator with 21" x 36" shroud
Cumberland model 37-B, 5 knife, staggered bed, open rotor granulator or cutting chamber.
COMPLETED! Cumberland model B-24, 18" x 24", 3 knife open rotor granulator
Hobart model 6614, 200/230 volt 3 Ph commercial meat bandsaw, saw blade is not included
Komatsu model FG200-11, propane powered 4,000 lb. capacity fork lift with maximum vertical lift height of 128" and fork dimensions of 4" x 42" length, unit has 9,341 hours on meter
Hyster model H40XMS approx. 4000 # capacity propane powered fork lift
Champion model VR10-12 460 volt 3 phase air compressor with tank and (1) Champion model 35CNDA100 compressed air conditioner
1994 International 2 WD auger truck (digger) with a Altec boom, diesel engine, manual transmission, 5853 hours on hour meter, 105301 miles on 6 digit odometer, AM/FM stereo, rear dully's, Chelsea P.T.
2000 Ford F-550 XL Super duty boom truck with automatic transmission, Triton V 10 engine, extendo mirrors, AM/FM digital stereo, 12 volt accessory power supply, driver and passenger side air bags, rea
1996 MEC model 1632, 24 volt electric scissor lift, 16' max. platform height, max. lift capacity 500 #'s, non-marking hard rubber tires, 40" extendable platform,
Case model 560 diesel trencher with a model D-125 hydraulic front 16" bucket, 6' straight blade mounted to front with individual controls, 4' chain trenching attachment with individual controls, 4 whe
Case 860 turbo cable plow diesel engine, 4 wheel independent steering, front reel carrier, 575 hours on 4 digit meter
Yale model ERC060RGN36TE084, 36 volt, 6000 # max. capacity electric fork lift with 187" max. lift height, 4" x 48" forks, solid rubber tires, 4755 hours on meter, (in running condition) Exide Workhog
Bliss model C-75 OBI press, 75 ton capacity, 24" x 36" bed, 18 1/2" x 29" ram, 3 1/2" slide adjustment, 6" stroke, 15 1/2" shut height, air clutch, air brake, (No press control, NOT in service) includ
Kent model 10-135-PMA strip welder, 10" max. width sliding tig torch head, various speed control, Lincoln precision tig 225 power source all mounted on portable car
2000 Southerland model FTP-110 gap frame press (110 ton capacity), 1880 mm x 700 mm bed, 1360 mm x 56 mm ram, 90 mm slide adjustment, 180 mm stroke, 400 mm shut height, 35 - 65 strokes/min; air clutch
Minster, model 4, OBI Press 32 ton , with 16" x 24" bed, 13" x 20" ram, 2.25" slide adjustment, 2" stroke, 12 shut height, 100 strokes per minute, air clutch, air brake, Minster press control, palm bu
1983 Ardcor model S10-2-10 roll form mill, with 2" diameter, spindles, 9-stand on 10" centers, 15 hp. Main drive motor, 10" center to center auto guard control, and coolant container. Includes (1) mo
Minster, model 5, 45 ton capacity, Gap Frame Press, with 18" x 28" bed, 14" x 24" ram, 2.50" slide adjustment, 4" stroke, 12" shut height, 9 strokes per minute, air clutch, air brake, Minster press co
1963 Bliss model C-45 OBI Press, 45 ton capacity, 19 1/2" x 29 1/2" bed, 16" x 26" ram, 3" slide adjustment, 6" stroke, 17 1/4" shut height, air clutch, air brake, 14" max width servo driven feeder, C
1983 Grob model 4V-18 vertical band saw with 18" throat, 10" max thickness, 24" x 28" tilt table, built in blade welder/grinder
Sutherland model FCP-60H, 60 ton capacity, Gap Frame Press, (bolster area is 900 c 520 mm. Die height is 270 mm.) 55-110 S.P.M, 10 x 4 hp main motor, 70mm slide adjustment, with a AMS model XL100 seri
Econopak model 12CRS, 3000 Lb. capacity, coil machine, 52" max coil diameter, Mandrel expansion range = 25 1/2" - 20 1/2" STK width = 12", Feed length = 999.999", power supply is 110 volt.
Johnson model 5-FW-AC OBI press, 56 ton capacity, 19" x 29 1/2" bed, 12" x 12" ram, 3" slide adjustment, 4" stroke, air clutch, air brake, servomatic 12" max width servo driven feeder, Jobber Plus pre
Willis model 618 hand feed surface grinder 6" x 18" travels, 3450 RPM spindle, 6" x 18" magnetic chuck
1968 Bliss model C-35 OBI press, 35 tom capacity, 17" x 26 1/2" bed, 9" x 12 1/2" Ram, 2 1/2" slide adjustment, 2" stroke, 1 1/4" shut height, air clutch, air brake and floor mounted jobber plus press
Entron model EN1000 microprocessor based welding control unit with 2 hand safety finger controls
LeROI CompAir model CL30SSAH, 100 PSI, air compressor unit, includes approx. 100 gal. holding tank.
Kobelco model KA50E, 480 volt, 3Ph, 50 Hp rotary screw air compressor, includes (1) approx. 200 gal. holding tank and (4) approx. 20' lengths of pipe with shut off valves and rubber hose.
Coats tire changer, 5060AX
Hobart commercial meat saw, model 5801, 120/230 volt, 3-phase, fair condition
Hussmann refrigerator/freezer unit, model ES1-8U, 120 volt, 99" width x 47" depth x 53" height, fair condition
Hussmann refrigerator/freezer unit, model ES1-8U, 120 volt, 99" width x 47" depth x 53" height, fair condition
Hussmann refrigerator/freezer unit, model ES1-8U, 120 volt, 99" width x 47" depth x 53" height, fair condition
Stoelting model SF144-38I 230 volt single phase frozen drink dispenser
Komatsu model FG20C-12W approx 4000# capacity propane powered forklift, unit has some corrosion, unit powers on
Progressive model PRA-100-18, 460 volt, 3 Ph, 100 KVA resistance welding machine with 18" throat and 8" gap
Progressive model 602ES4, 440 volt, 3 Ph, 150 KVA resistance welding machine, with 18" throat and 8" gap (max. welding force at 80 PSI, obtainable on this machine is 4000 #'s)
Taylor Winfield model ERC-12, 440 volt, 3 Ph, 150 KVA resistance welding machine
Taylor Winfield model PROJ, 440 volt, 3 Ph, 150 KVA resistance welding machine
Clark model C500-40, 4000 # capacity propane powered fork lift with 130" max. lift height, 5" x 42" forks, 9404 hours on meter, non-marking solid rubber tires
Lamson Corporation 480 volt, 3 Ph 10,000 CFH exothermic generator with control panel that includes variable pump controls, fan controls and alarm, main disconnect, all pump motors, water pipe, chiller
McQuay model AFCO 63 N27, 460 volt, 3 Ph air cooled fluid cooler, (previously run on ethylene glycol) total DIMS: 183" width x 42" height x 88" depth
Woodmaster Model 3820 Dual Drum Sander, 230 Volt, Single Phase
Delta 5-Speed Shaper, Model RS-15, with Roller Feeder, 230/460 Volts, 3-Phase Motor
Daewoo model G20E-3, propane powered 4000 lb. capacity fork lift with max. vertical floor height of 173", fork dimensions of 4" width x 39" height unit has 5,446 hours on meter
True Manufacturing Company refrigerator unit, model GDM-72F, 1-phase, 115/208/230 volt, 78" width x 30" depth x 79" height, fair condition
Hobart, model 6614, 200/230 volt 3 Ph stainless steel commercial food preparing meat saw with 3 HP motor
Hobart mixer/grinder, model 4346, 200 volt, 3 phase, in good condition, 31" width x 53" height x 25" depth, (working condition unknown, unable to test)
Bizerba, model SE12 D, 120 volt 1 Ph commercial meat slicer (unit appears to be in good condition)
Stoelting model U431-309, 208/230 volt commercial ice cream and smoothie machine with lower cooler
Hobart model 5801, 200/230 volt commercial meat saw
Mitsubishi model FGC30, 6000 # capacity propane powered fork lift with 6" x 60" forks, 130" max. lift height, 1296 hours on meter, solid rubber non-marking tires,
Quickwood type D2, 220/440 volt, 3 Ph, Finishing brush sander. includes (1) 10? long x 33" width, (1) 4' long x 20" width and (1) 5' long x 43" width section of roller conveyor
Komatsu model FG20C-12W approx. 4000 # capacity propane powdered fork lift with 128" max. lift height and (2) 4" x 42" forks
Daewoo model G20E approx. 4000 # capacity propane powered ride on fork lift with 173" max. lift height, 4" x 42" length forks
Champion model VR10-12, 460 volt, 3 Ph, 127 gal. Air compressor, 4378.7hours on meter,
HYSTER 6,000 lb. capacity fork lift, model # S60XL, triple stage mast with side shift, LP gas, battery draws down,needs jump started..
Geka Hydracrop-100-S combination 3 hole punch press/24" press brake/notching press, can cut a 6" x 6" x 1/2" 90 degree piece of angle iron or a 24" x 5/8" piece of flat stock, 2" piece of bar stock, 2
Lincoln Electric Powerwave 455 welder,(appears to be wired 480 volt, 3 Ph) along with (1) Lincoln Electric power feed unit, (voltage unknown) includes (1) 24" width x 42" height x 37 1/2" depth steel
Marvel model 81/5 heavy duty industrial band saw with incremental tilt, hydraulic clamps, 1 1/2" blade, (1) 60" long x 39 1/2" height x 30" depth section of heavy duty steel roller conveyor and (1) 45
Franklin Manufacturing Inc. model W5100X18, 100 ton hydraulic punch press (stroke: 2.00", max. hole diameter: 1.50", max. material thickness: 1.0") includes various sized punches, (1) 98" width x 39 1
W.A. Whitney Corp. model 822-920, 45 ton capacity hydraulic angle shear, (pump is wired 480 volt, 3 Ph, 10 Hp) includes ALL heavy duty roller conveyor
Lincoln Electric Powerwave 455 welder (appears to be wired 480 volt, 3 Ph) along with (1) Lincoln Electric power feed unit, S/N U1020334184 (voltage unknown) Also includes custom fabricated 26" width
Bigg model 2-CNC, 480 volt, 3 Ph, CNC pipe bender with 4 various sized heads (1 1/4" - 130 degree, 2" - 130 degree, 1 1/4" - 90 degree, 1/2" - 90 degree) unit has a Ercolina top-bender microprocessor
Vicon Model 8000 HVAC Plasma Cutting System, 5 x 10' cutting area, 28 gauge to 1/2 in. thick plate material capacity, DIMS: 144" length x 90" width x 35" height along with (1) Hypertherm Powermax 1000
Chicago Steel model 204, size W31, manual bending brake
Caterpillar model 150B, 5000 # capacity, 106" lifting height, propane powered fork lift with side shift and 4 x 48" forks
Roto-Die model 10 hydraulic bender, DIMS: 140" width x 48" depth (works)
Yale sit-down ride on forklift, model GLP040AFNUAF084, propane forklift, capacity 4,000#, does not include lp tank, fork height 129"
Yale model GLP040SVXNUSF084 propane powder fork lift, 4000 # lift capacity, 126" lift height, 4 x 42" forks, single stage mast, side shift
Lincoln Impinger model 11332-00-U-K1841 stainless steel oven with 19" conveyor
Coats model 5060AX commercial tire changer, no other information available
Hobart model D300T, 115 volt, 10.2 amp, 3/4 Hp commercial food mixer with 3 attachments
Devlig, model 3H-72 Jigmil (Manual Machine tool, mill-drill, tap, bore) X travel = 72", Y travel = 48", Z travel = 16" (35" x 72" platen runs in and out (2 squared)16" in/out does not include angles o
Terex model TA30N, (Marklift CH30KBN) 48 volt man lift with extendable boom, solid rubber tires and a 120/220 volt input built in battery charger (needs New batteries) (max. work load including occupa
Schaeff model W55WSF186TS0, 5500 # capacity, 36 volt electric stand up fork lift with 5 x 48" forks, 186" max. lift height, built in digital scale, side shifter (hours on meter unknown) includes Hobar
Hyster model RC150, 15,000 # capacity propane powered fork lift with 2 stage mast, 6 x 46" forks, pneumatic dual front tires, 13 hours shown on meter (not actual reading), and (1) extra fuel tank (uni
WFWells model W-9, portable horizontal band saw with a 9" x 12" capacity, coolant (unit is wired for 440 volt 3 phase)
1997 Kaeser model AS44 air compressor (rotary screw type) 40 horsepower, sigma profile controls, fuel enclosure
1998 Hyster model S50XM propane power fork lift with a 4950# max lift capacity, 189" max lift height, 4" x 42" forks, side shifter, solid tires (hours unknown)
Fadal model 5020A vertical machining center with a 15 horsepower motor, 10000 rpm CAT 40 spindle, 20" x 56" T-slotted table, 50" x 20" x 20" XYZ travels, Fadal CNC 32MP controller, 24 position automat
Fadal model 4525-922-1 vertical machining center with a 15 horsepower motor, 10000 rpm spindle, 25" x 54" T-slotted table, 45" x 25" x 24" XYZ travels, Fadal CNC 32MP controller, 24 position automatic
Fadal model 4020A-917-1 vertical machining center with a 10 horsepower motor, 7,500 rpm CAT 40 spindle, 20" x 49" T-slotted table, 40" x 20" x 20" XYZ travels, Fadal CNC 32MP controller, 21 position a
EW Bliss model C-60 60 ton OBI press with a 21" x 32" bed, 12' x 17" ram, 4" stroke, 3" slide adjust, 14" max shut height, electric clutch, electric break, palm buttons and bliss press control manufa
Elumatec model SA142-36 18" diameter cold saw, 30" max feed length semi automatic operation, pneumatic clamping, full enclosure, 12" x 60" elevator roller conveyor , manufactured 2001
Brother model TC-32B QT CNC tapping center, 10 horsepower motor, 16000 rpm CAT 30 spindle, 2 position rotary table with 18" x 24" tables, 21" x 15" x 16" XYZ travels, comes with a Brother CNC controll
Burr King model 45-106 4.5 cubic ft. vibratory finishing machine with a 16" x 18" x 36" top loaded vibratory hopper and end discharge
DoAll model C-916M, 480 volt, 3 Ph horizontal band saw with 159" band length (in working condition) along with (1) 10' long x 29" height x 21 1/2" depth roller conveyor stand with 8" clamp and model C
Miller Syncrowave 350 constant current AC/DC Tig welder with cart (input 200/230/460 volt, 1 Ph
Cincinnati model 1810 shear (capacity 1/4" x 10' mild steel) wired 220/440 volt, 3 Ph
Case 580 B Diesel Loader, With Backhoe. Starts & Runs. 1355 Metered Hours
Busy-Beaver Model 175 Chipper, Kohler Engine, 2" ball
John Deere 710B 1-Yard Backhoe/Loader, (2) New Batteries,
Nissan LP Fork Lift, model: KCPH02A25PB auto trans, non-marking hard tires, 3 stage mast, 187" max lift height, side shift, 4,711 metered hours, 40" forks, 4,400 lb capacity at 24" load center
2000 ATLAS COPCO air compressor, model: GA18, 25hp, 103.9cfm, 132psi, comes with great lakes air dryer and air tank
Caterpillar, propane fork lift, Model:T50B, serial: 12V1965, 3-stage mast, 5000 pound lift capacity at 24" load center, hour meter reads 2,809,
ACCUSHEAR hydraulic sheer, Model: 625012, Date code 7 04, 460 volts, 3 phaze, 20hp, Approx dimensions: 14' x 90" x 7' tall, capacity thickness .250, cut length 12, oil press 3500, min clearance .002,
ACCUPRESS hydro-mechanical press brake, Model:7017515, 480 volt, 175 ton, bed length 12', control volt 120, hyd, oil pressure 3800, date of manufacturing 0704, 3 phaze, Approx: 178" long x 60" wide x
HYD-MECH vertical tilt frame band saw, Model:V18,
Spartan Iron Worker, Mod: IW66DSPARTAN, s/n: IW66D-246,460 volt, 3 phaze
Hypertherm Power Max 1000, G3 series plasma cutter, 200/480 volt, 3 phaze
Euromac Variable Angle Notcher, Model:AV220-6
JET, Vertical milling machine, MOD: JVM-836-3,
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included,
Miller, Delta Weld, MOD: 302, CV-DC welding power source, 200/230/460 volt, 3 phaze, with Miller MOD: 22A, 24 volt, wire feed, tank not included
Parker Parflange model 1040, 440 volt, 3 Ph flanging
Nachi Fujikoshi EVHED 244230 Tempering furnace:Furnace Specs:Load: 500 Kg @ 700 C, +/- 5 CLoad size: 600 MM wide x 1050 MM long x 750 MM high680 L/min water cooling requiredvacuum purge, nitrogen flow
Nachi Fujikoshi model EHB 3VCHardening furnace (vacuum purge system) Furnace Specs: 1350 C max tempLoad rating: 75 KG @ 1250 C, 150 KG @ 1050CLoad size: 450 mm wide x 450 mm high x 600 mm longHot zone
Mitsubishi model DWC110HA, Wire EDM includes a Dia-trans 402/201 volt, 21.5/43.1 amp transforme
Mitsubishi model DWC90H wire EDM, includes model HE-UV300-01 unit cooler and Dia-trans 402/201 volt, 21.5/43.1 amp transformer
Okuma model LH35-N CNC, flatbed lathe with Okuma model OSP-U100L controls (24" swing, 10' between centers, chip conveyor, twin turret, steady rest and 4 1/2" spindle hole) wired 22/440 volt, 3 Ph
Okuma model LH35-N CNC, 3 Ph flatbed lathe with Okuma model OSP-5020L controls (24" swing, 10' between centers, chip conveyor, twin turret, 3 steady rests and 4 1/2" spindle hole) wired 22/440 volt, 3
Okuma model LH35-N CNC, flatbed lathe with Okuma model OSP-7000L controls (24" swing, 10' between centers, chip conveyor, twin turret, 3 steady rests and 4 1/2" spindle hole) 220/440 volt 3 phase
Ridgid model 802, 115 volt, portable threading machine with forward and reverse and (8) various threading heads sized from 1/8" to 2"
Ridgid model 300, 1220 volt pipe threader with steel roller attached and tristand along with (1) Ridgid adjustable height tripod with rollers.
Atlas Copco model G37PLUS, 50 Hp air compressor,
Atlas Copco model G37PLUS, 50 Hp air compressor,
Lincoln Electric Square Wave Tig-350, AC/DC tig and stick arc welder with custom fabricated cabinet full of misc. welding rod (208/230/460 volt, 1 Ph input, 350 amp AC/DC, 40 percent duty cycle at 34
Magnaflux model GD-96 magnetic particle inspection machine with a 10' long x 30" depth bed (capacity 15" diameter x 8' long) includes cabinet and all controls
Upton model BCG-2517 gas fired furnace (max. temperature 1350 degrees F, 1000000 BTU) Interior DIMS: 14' long x 4' width x 36" height with 72" long x 29" width chain driven carrier and wheel conveyor
Upton model BCG-2517 gas fired furnace (max. temperature 1350 degrees F, 1000000 BTU) Interior DIMS: 14' long x 4' width x 36" height with 72" long x 29" width chain driven carrier and wheel conveyor
TCM model FCG25N6T propane powered 4600 # capacity fork lift with 4 x 48" forks, solid rubber tires, 189" max. lift height, 19041 hours on meter,
Simon Silver-Eagle model 32/21DF, propane/gas powered man lift (500 # max. capacity platform load) with 5' width x 30" depth steel platform, 38' max. working height, approx. 16' max. boom extension, 2
Bryant 48" tall (220 volt, 3 Ph) center hole grinder with 115 volt controls
Jones Lamson classic 130 optical comparator coordinate measuring machine with Quadra-chek 200 read out unit with tail stocks and Novalite projection unit
Heald model 361 rotary grinder with a 31" diameter magnetic chuck incremental down feed, overhead light, coolant pump, 15 Hp spindle motor (wired 440 volt, 3 Ph)
Monarch model 610 (1610 x 54), wired 460 volt, 3 Ph engine lathe with 16" swing, 12" 3 jaw chuck, attached cutting tool on rotary base, 80" long bed, steady rest, various chuck attachments, chip tray
Monarch model 62 (1610T x 30), wired 460 volt, 3 Ph lathe with Futaba Pulscale XY axis read out, 12" diameter 3 jaw chuck, approx. 60" bed, 36" travel, chip tray, coolant pump, overhead light, various
Warner & Swasey 2A model M-3470, wired 460 volt, 3 Ph, saddle type turrett lathe with 5" spindle hole, 15" 3 jaw chuck with power wrenching, chip tray, various tooling includes (1) 72" width x 32" he
Marvel series 15A heavy duty industrial horizontal band saw with 30" adjustable width capacity with height selector controls, hydraulic clamps additional 10' long x 25" width roller table and Marvel m
Okuma model LB25, wired 440 volt, 3 Ph, CNC lathe slant bed with tail stock, Turbo model 6475-8390 chip conveyor 12" 3 jaw hydraulic chuck, Okuma controls,
OKK model V-1, 5 axis machining center with 12 station automatic tool changer, chip conveyor, Nikken 5th axis tilting rotary table and Mitsubishi controls includes (1) 60" width x 35 1/2" height x 30"
Mitsubishi model DWC110H wire type EDM machine with Mitsubishi controls and a type DWC-110 electrical discharge machine includes pumps and coolers and hand held remote
Nachi Redring model SF900, wired 460 volt, 3 Ph, gear grinder (incomplete - some parts missing) with Allen-Bradley 8600 CNC controls
Nachi Redring model SF900, wired 460 volt, 3 Ph, gear grinder with Allen-Bradley 8600 CNC controls,
Ryerson/Chicago model PB-8135, 440 volt, 3 Ph, 96" brake with electronic controls
DoAll model 1612-3, 220 volt, 3 Ph heavy duty band saw with a 30 1/2" x 24" table, 125" max. band length, 3/4" blade and attached DoAll model DBW-8, 220 volt band welder and grinder
Devlieg/Spiramatic Jigmil model 3H-48 with a 440 volt, 3 Ph AC motor, Futaba Pulscale CMA unit
Kearney & Trecker/Milwaukee model 630/TF-20 horizontal mill with a 12" diameter 3 jaw chuck, 106" width x 20" depth bed (20,000 amp capacity, wired 220 volt, 3 Ph), Over-Arm Arbor and Arbor Supports
Peck, Stow & Wicox Co. (PEXTO) model 10-U-8, 8' width shear (capacity 10 gauge soft steel, believed to be wired 440 volt, 3 Ph)
Howa Sangyo type 1000, 440 volt, 3Ph, lathe with (2) 5" steady rests, approx. 48" travel, 9" 3 jaw chuck, coolant pump, chip tray, attached precision cutting tool and steel guards
Stoelting, 208/230 volt 3 Ph, commercial ice cream machine, and refrigeration unit, model U431-309
Genie, GS1930, high lift scissor lift, voltage unknown, maximum lift height of 19 feet, platform capacity retracted 500 lb., platform extended capacity 250 lbs.
Stoelting model SF144-38I, 230 volt, 1 Ph frozen drink dispenser
Weka type DK22, 110 volt core drill with portable stand and (2) used core bits (1 - 7 in. diameter and 1 - 3 in. diameter)
Mayville scissor lift model: MEC 2548HT 36 volt, hours unknown, capactiy 850, lift 24', deck approx. 8'x4
2008 John Deere 320 Skid Steer, Power Tatch, New 12 x 16.5 Tires, 2000lbs Rated Operating Capacity. 4-Cylinder John Deere Turbo Diesel Engine, 3045.3 Metered Hours, No Bucket
Case W24, Rubber Tire Loader, Approx. 2-Years Old, Case Diesel Motor, No Brakes, Newer Paint, Runs, Fender, rust through, 40-50% Rubber, the Tires are Weather Checked
Hyster Forklift, Model #H110XL 11,000 lb. Capacity, New Dual Air Tires, Heated Cab, Gasoline, Lifts 197", 3-Stage, 48" Forks with Side Shift, 8855 Metered Hours, cracked windshield
JLC Scissors Lift, Model 2032E 20' Platform Heigh
JLG Scissor Lift Model #3246 E232' Platform Height, 2' Extension, Runs and Operates
JLG Scissor Lift Model#2646 E2 26' Platform Height, 2' Extension, Runs and Operates
Skytrak 6036 Extenda Boom Forklift, Diesel, 3-Speed Trans., 4x4, New Tires, Paint has Been Torched Up, 48" Forks, 5' Wide Carriage
MEC 33RT Scissors Lift33" Platform, Gas, 4x4, Hydraulic Outriggers, 12 Volt, No Brakes, 2302 Metered
Case Model 1845C Skid Steer Uni-Loader with diesel engine, S/N: JAF0295626. 4 X 36 in. forks, 4009 hours on meter, hydraulic coupler control and headlights
2001 Bobcat, 773 skid steer loader, 4201 metered hours, EROPS, diesel engine, hydraulic remote, 31 X 15.5-15 tires
CROWN RR5010-35, 3.500# NARROW AISLE FORKLIFT 210" LIFT, REACH FRONT, 202 HRS. W/ EXIDE LOAD HOG CHARGER
ROUGH TERRAIN FORKLIFT, KD MANITOU MDL. M230CP, DIESEL PWRD., 5,500 LB. @ 24" LOAD CENTER, 180" MAX. LIFT, 3,475 LB. @ 24" LOAD CENTER, 264" MAX. LIFT, MDL. 4524-4595-4543 3-STAGE MAST, 42"L. FORKS, S
ROUGH TERRAIN FORKLIFT, KD MANITOU MDL. S502TC-D, NEW 1994, DIESEL PWRD., 5,000 LB. @ 24" LOAD CENTER, 144" MAX. LIFT, 2,750 LB. @ 24" LOAD CENTER, 252" MAX. LIFT, MDL. 2308-2387-2339 3-STAGE MAST, SI
ROUGH TERRAIN FORKLIFT, CASE MDL. 586E, 6,000LB. CAP., DIESEL PWRD., 48"L. FORKS, 2-STAGE SIDE-SHIFT 22" MAST, SIZE: 19.5L-24 ROUGH TERRAIN TIRES
ROUGH TERRAIN FORKLIFT, CASE MDL. 586C, 6,000LB. CAP., DIESEL PWRD., 48"L. FORKS, 2-STAGE SIDE-SHIFT 22" MAST, SIZE: 19.5L-24 ROUGH TERRAIN TIRES
FORKLIFT, HYSTER 35,000 LB. CAP., MDL. H350B,35,000 LB. @ 24" LOAD CENTER, DIESEL ENGINE, AUTO. TRANS., CAB W/HEAT, 8" FORKS, SIDE-SHIFTER
FORKLIFT, HYSTER 6,000 LB. CAP., MDL. H60C, LP GAS ENGINE, OIL CLUTCH TRANS., 12 INCH LIFT, 48 INCH FORKS, FORK POSITIONERS
FORKLIFT, TCM 6,000 LB. CAP., MDL. FGC30-4HL,LP PWRD., 130" MAX. LIFT HEIGHT, 42"L. FORKS, SIDE-SIFTER
FORKLIFT, CLARK 8,000 LB. CAP., MDL. C500Y80S, LP PWRD., 8,000 LB. @ 24" LOAD CENTER, 147" MAX. LIFT HEIGH
FORKLIFT, HYSTER 10,000 LB. CAP., MDL. H100XL, LP GAS ENGINE, AUTO. TRANS., 11 FOOT LIFT, 48 INCH FORKS, FORK
SIDE-LOADER FORKLIFT, ELWELL PARKER SHAWLOADER 60,000 LB. CAP., 20' TTL. BED LENGTH, 8'L. FORKS, HYD. OUTRIGGER SUPPTS., MDL. 560, CUMMINS DIESEL ENGINE, 2-STATION OPERATOR"S CONTORL PULPIT
HYDRAULIC ROUGH TERRAIN CRANE, LINKBELT MDL.YC18, MDL. LH318 6 CYL. 95 HP GASOLINE ENGINE, 18,000 LB. @ 6' RADIUS, HYD. OUTRIGGERS, SIZE: 14.00-24 R0UGH TERRAIN TIRES, HYD. 3-SECTION BOOM, 22' OVERALL
HYDRAULIC ROUGH TERRAIN CRANE, LORAIN MDL. ERI-180, 40,000 LB. G.V.W.R., DETROIT DIESEL ENGINE, HYD. 45' 3-SECTION BOOM, SIZE: 17.5-25 ROUGH TERRAIN TIRES, SWING-UP FLY BOOM, 15.12" GROUND CLEARANCE,
Whiteman Model WPB-16 Gas Powered Concrete Buggy
Haulotte Ciseaux Compact 12 battery electric 12m scissor lift Year: 2004
Haulotte Cissaux H12SX diesel driven 4 wheel drive 12m scissor lift Year: 2004
Haulotte Ciseaux H18SX diesel driven 4 wheel drive 18m scissor lift Year: 2004
Haulotte Ciseaux H12SX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 663
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2005 Hours: 749
Haulotte Ciseaux H12SX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2004 Hours:
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2004 Hours: 1723
Haulotte Ciseaux H12SX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours:
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2005 Hours: 809
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2005 Hours: 456 Fleet No: DS463 c/w Hydraulic stabiliser legs slide out extending platform (double end)
Haulotte Ciseaux H18SX diesel driven 4 wheel drive 18m scissor lift Year: 2005 Hours: 160
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2004 Hours: 871
Haulotte Articulee HA16PXNT diesel driven 4 wheel drive 16m articulated boom lift Year: 2004 Hours:
Haulotte Ciseaux BR Compact 12DX diesel driven scissor lift Year: 2004
Haulotte Ciseaux BR Compact 12DX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 823
Haulotte Ciseaux BR Compact 12DX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 1171
Haulotte Ciseaux BR Compact 12DX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 1036
Haulotte Ciseaux BR Compact 10DX diesel driven 4 wheel drive 10m scissor lift Year: 2004 Hours: 1411
Haulotte Ciseaux BR Compact 10DX diesel driven 4 wheel drive 10m scissor lift Year: 2004 Hours: 622
Haulotte Ciseaux BR Compact 10DX diesel driven 4 wheel drive 10m scissor lift Year: 2004 Hours: 1041
Haulotte Ciseaux BR Compact 12DX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 1105
NISSAN MDL- CWGP02L305 FORKLIFT, ELECTRIC, DUAL PALLET FORKS, 3530 LB CAP., CUSHION TIRES, 8464 HRS.,
NISSAN MDL- CWGP02L305 FORKLIFT, ELECTRIC, DUAL PALLET FORKS, 3530 LB CAP., CUSHION TIRES, 4638 HRS
NISSAN MDL- CWGP02L305 FORKLIFT, ELECTRIC, DUAL PALLET FORKS, 3530 LB CAP., CUSHION TIRES, 5069 HRS.,
NISSAN OPTIMUM 30 MDL- PJ01A15PV FORKLIFT, LPG PROPANE, 3300 LB CAP., CUSHION TIRES, 11663 HRS.,
NISSAN OPTIMUM 60 UGJ02A31PV FORKLIFT, LPG PROPANE, 4300 LB CAP., CUSHION TIRES, 10126 HRS.,
NISSAN 50 MDL- MPL02A25LV FORKLIFT, LPG PROPANE, 4750 LB CAP., CUSHION TIRES, 5157 HRS
NISSAN 55 MDL- MCPL02A28LV FORKLIFT, LPG PROPANE, 5000 LB CAP., CUSHION TIRES
NISSAN 30 MDL- MCP01A15LV, FORKLIFT, LPG PROPANE, 2550 LB CAP., CUSHION TIRES,
NISSAN OPTIMUM 50 MDL- CP102A25PV FORKLIFT, LPG PROPANE, 4750 LB. CAP., CUSHION TIRES, 11662 HRS
NISSAN OPTIMUM 80 MDL- BF03A35V FORKLIFT, LPGPROPANE, 6775 LB. CAP., CUSHION TIRES, 6933 HRS.
NISSAN OPTIMUM 60 MDL-UGJ02A3OEV FORKLIFT, LPG PRPOPANE 3300 LB CAP., DUAL PALLET FORKS, CUSHION TIRES, 6187 HRS.,
Toyota 5FGC30 5300LB Cap 3-Stage LPG Forklift
Toyota 5FGU30 6000LB Cap 3-Stage LPG Forklift
Toyota 7FGU30 6000LB Cap 3-Stage LPG Forklift
WHITE 4300 LB. CAPACITY MODEL MA45 LP FORK LIFT TRUCK: W/3-Stage Mast; Solid Tires
TCM Model FCG25-3HL Forklift, 4,300 lb. Cap., Cushion Tire, LP, 3-Stage Mast, SideShift, 42 In. Forks, 440 Hrs.
JLG Model 1930ES Electric Scissor Lift, New 2008, 18 Ft.8 In. Max. Platform Ht.,500 lb. Cap, 77 Hrs.
JLG Model 1930ES Electric Scissor Lift, SN 0200142131, New 2006, 18 Ft.8 In. Max. Platform Ht.,500 lb. Cap, 142 Hrs.
2001 Genie Model GS-4390 Rough Terrain Scissor Lift 4WD, Solid Pneumatic Tires, 69 In.x152 In., Platform, 1,500 lb. Cap., Dual Fuel, LP orGas, 43 ft. Max Platform Ht., Extendable Platform
1999 Genie Model Z45/25 Rough Terrain Boom Lift4WD, Pneumatic Tire, 45 Ft. Max.Platform Ht., 24 Ft. Max. Horz. Reach, 500 Lb. Cap.,Dual Fuel, LP or Gas, 2,525 Hrs.
2003 JLG Model 450AJ Series II Rough TerrainBoom Lift 4WD, Pneu. Tires, 45 Ft. Max.Platform ht., 24 Ft. Max. Horz. Reach, 500 lb. Cap.,Dual Fuel, LP or Gas, 1,713 Hrs.
2002 Foster 18 ft. Tandem Axle Trailer, 80 In. Wide, Fold-Up Ramps, GVWR 14,000 lb.
Link Belt Crane Model HC108b 40 Ton Capacity, Hydraulic Outriggers, Hook Block, 75 ft. of Boom, Cummins Diesel for Crane and Driving Engine
GROVE STEVEDORE HYDRAULIC CRANE M-S4000 4000 LB CAPACITY, HYDROSTATIC, ELECTRIC, 0 DEGREE - 80 DEGREE LIFT, 1156 HRS, NEW TIRES, W/ IBC 36 VOLT BATTERY CHARGER
TOYOTA 3000 LB LP FORK TRUCK M-42 6FGCU15 189" LIFT HEIGHT
TOYOTA 3000 LB LP FORK TRUCK M-426FGCU15 171" LIFT HEIGHT
1972 PETTIBONE M-25, 4X4 CRANE W/ 4-CORNER OUTRIGGERS, 25' TELESCPOIC BOOM, 360 DEGREE RANGE OF MOTION, 6839 HRS, DIESEL
RAYMOND, 204DR40TT, 4000 LBS. 2-STAGE 4-DIRECTIONAL BATTERY POWERED SIDELOADER (FORKLIFT), 211" MAX. LIFT, 849 HOURS, CHARGER INCLUDED,
TOYOTA, 7FGU25, 5000 LBS, 3-STAGE LPG FORKLIFT WITH SIDE SHIFT, 189" MAX LIFT, 5183 HOURS
TOYOTA, 7FGU25, 5000 LBS, 3-STAGE LPG FORKLIFT WITH SIDE SHIFT, 189" MAX LIFT, 5600 (APPROX) HOURS
TOYOTA, 7FGU25, 5000 LBS, 3-STAGE LPG FORKLIFT WITH SIDE SHIFT, 189" MAX LIFT, 5683 HOURS
TOYOTA, 7FGU25, 5000 LBS, 3-STAGE LPG FORKLIFT WITH SIDE SHIFT, 189" MAX LIFT, 5602 HOURS
NISSAN, MCUGL02F36LV, 6700 LBS. 3-STAGE LPG FORKLIFT WITH SIDESHIFT, 191" MAX LIFT, 1959 HOURS
NISSAN, MCUL02A33LV, 5700 LBS. 3-STAGE LPG FORKLIFT WITH SIDESHIFT, 175" MAX LIFT, 1349 HOURS
HYSTER, S120XM, 12000 LBS, 3-STAGE LPG FORKLIFT WITH SIDESHIFT, 208" MAX LIFT, 6825 HOURS
Mitsubishi Mdl.FGC25 5,000 Lb. Forklift 2 Stage Mast, Propane Driven, Cushion Tires, 40 Inch Forks
Mitsubishi Mdl.FGC25 5,000 Lb. Forklift 2 Stage Mast, Propane Driven, Cushion Tires, 40 Inch Forks
Juneheinrich EFG-DF20 2,000kg electric forklift truck, year of manufacture 2000.
JLG Wheeled ELECTRIC ACCESS PLATFORM - Telescopic Boom Cherry Picker - Model N40 - TWO PERSON Capacity - SWL 230KG - Year 1996 - Operating Height 45ft
JLG 2646E Self-Propelled ELECTRIC SCISSOR LIFT - Extendable Access Platform - TWO PERSON Capacity - SWL 340 KG - Year 1997 - Approx Working Height 9.7M / 32ft
BRODERSON 17,000 LB. CAP. CARRY DECK MOBILE CRANE LP. MODEL 1C802D
BRODERSON 17,000 LB. CAP. CARRY DECK MOBILE CRANE LP. MODEL 1C802D
Hyster LP gas 700x12 tires approx. 5000 lb. fork lift 3 stage mast w/ side shift
Komatsu model 30 large tired 28.9x15 5000 lb.LP gas fork lift w/ 3 stage mast 8756 hours
Halla Model LF30 6000 lb. LP gas fork lift w/815-15-7.0 tires, 3 stage mast side shift 4767 hrs
Caterpillar 5,000 Lb. Model T500SH Lpg ForkliftTruck
Komatsu 7,000 Lb. Mdl FG35BCS-7H Lpg ForkliftTruck
Mec Model 1932 Aerial Work Platform
Jlg Model 1932 Aerial Work Platform
Toyota Model 5FGC25, 4700 Lbs. LP GasFork Lift Truck
DAEWOO 4000 LB FORK TRUCK LP, 127" LIFT HEIGHT, SIDE SHIFT, G2424 ENGINE, M-G20-E
2004 YALE 6000LB ELECTRIC FORKTRUCK SIDE SHIFT, E-CUSHION TIRES, 211" LIFT HEIGHT
CLARK WIRE CAGE M-C-500-120, 12,000 lb, 2 - STAGE, WIDE MAST, DUAL FRONT HARD TIRES, PROPANE, R.O.P.S,
JLG Articulating Aerial Lift, Reach45', Capacity 500 Lbs Model# 45HA
HYSTER 4750 lb Fork Lift Model# E60BS
CATERPILLAR 8,000 Lb Fork Lift,Electric, Side Shift, Max Lift 156", Forks 48" Model# M80
AUTO LIFT 30,000 Lb. Fork Lift, LPG,Side Shift, Max Lift 127", Forks 60" Model# L5-300-30
FORKLIFT, CATERPILLAR 5,000 LB. CAP., MDL. B50B, LPG GAS ENGINE, SOLID CUSHION TIRES, 7' HT. DBL. STAGE MAST, 144" LIFT HEIGHT, 45"L. FORKS
FORKLIFT, TOYOTA 5,000 LB. CAP., MDL. 7FGCU25, NEW 2005, LPG ENGINE, 83" 3-STAGE MAST, 189" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 5,000 LB. CAP., MDL. 7FGCU25, NEW 2005, LPG ENGINE, 83" 3-STAGE MAST, 189" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 5,000 LB. CAP., MDL. 7FGCU25, NEW 2007, LPG ENGINE, 83" 3-STAGE MAST, 189" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 5,000 LB. CAP., MDL. 7FGCU25, NEW 2007, LPG ENGINE, 83" 3-STAGE MAST, 189" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, YALE 6,000 LB. CAP., MDL. GLP060TFNUAE087, PROPANE ENGINE, SOLID CUSHION TIRES, 7' HT. TRIPLE STAGE MAST, 187" LIFT HEIGHT, 60"L. FORKS
FORKLIFT, TOYOTA 6,000 LB. CAP., MDL. 7FGCU30, NEW 2006, LPG ENGINE, 84" STANDARD MAST, 130" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 10,000 LB. CAP., MDL. 7FGCU45, NEW 2006, LPG ENGINE, 87" 3-STAGE MAST, 187" LIFT HEIGHT, 42" FORKS, CUSHION TIRES
FORKLIFT, TOYOTA 10,000 LB. CAP., MDL. 7FGCU45, 2006, LPG ENGINE, 87" 3-STAGE MAST, 187" LIFT HEIGHT, 42" FORKS, CUSHION TIRES
FORKLIFT, TOYOTA 12,000 LB. CAP., MDL. 7FGCU55, NEW 2006, LPG ENGINE, 87" STANDARD MAST, 132" LIFT HEIGHT, 42" FORKS, CUSHION TIRES
FORKLIFT, YALE 12,000 LB. CAP., MDL. GLP120MSNGBE091, 2001, 91" 3-STAGE MAST, 180" LIFT HEIGHT, 42" FORKS, PNEU. TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 17,000 LB. CAP., MDL. T1700D, NEW 2002, DIESEL ENGINE, 212" STANDARD LIFT HEIGHT, 8' FORKS, PNEU. TIRES, FORK POSITIONER
FORKLIFT, TAYLOR 25,000 LB. CAP., MDL. TY250M, 453 DETROIT DIESEL ENGINE, 13 FOOT LIFT, 136 INCH LOWERED HEIGHT, SIDE-SHIFTER, PWR. SHIFT TRANS
FORKLIFT, TAYLOR 36,000 LB. CAP., MDL. TY360S, 36,000 LB. AT 35 INCH LOAD CENTER, 471 DETROIT DIESEL ENGINE, 20 FOOT LIFT, 100 INCH WIDE CARRIAGE, 110 INCH SHORT WHEEL BASE, PWR. SHIFT TRANS., SIZE: 1
FORKLIFT, HYSTER 62,000 LB. CAP., MDL. H620B,GMC DIESEL ENGINE, 197 INGH STANDARD MAST, 220 INCH LIFT HEIGHT, 8 FOOT FORKS, PNEU. TIRES
CROWN 4,500 LB. NARROW AISLE ELECTRIC REACH TRUCK
CROWN 3,500 STAND-UP RIDER SIDE SHIFT
Nissan PH02A200 LPG ride on forklift, capacity 1750 kgs, maximum lift height 4750mm, run hours 2,593 with all weather canopy
JLG 2032-F2 SCISSOR LIF
DAEWOO FORKLIFT
TOYOTA 7FGU25 LP GAS FORKLIFT 189 HT, SS, 4500 LB,
TOYOTA 7FGU25 LP GAS FORKLIFT 189 HT, SS, 4500 LB
TOYOTA 7FGU25 LP GAS FORKLIFT 189 LIFT HT
TOYOTA 7FDU70 13500 LB FORKLFT DIESEL, 8 ftFORKS, 219 LFT HT
GENIE GTH-1048 ALL TERRAIN TELESCOPING FORKLIFT
CLARK 6,000LB CAP. MODEL DCS30I DIESELFORKLIFT W/ TWO STAGE MAST; SOLID TIRES; 4,050 HRS
TOYOTA 7FGCU25 5000 LBS LPG LIFT TRUCK, 189"MAX. LIFT 4605 HOURS, CLAMP READY (3500LBS.)
TOYOTA 7FGCU25 5000 LBS LPG LIFT TRUCK, 189"MAX. LIFT 5054 HOURS, CLAMP READY (3500LBS.)
TOYOTA 7FGCU25 5000 LBS LPG LIFT TRUCK, 189"MAX. LIFT 5032 HOURS, CLAMP READY (3500LBS.)
HYSTER, S150A 15000 LBS LPG LIFT TRUCK WITH 129 MAX LIFT, 2258 HOURS
TOYOTA 7FGCU25 5000 LBS LPG LIFT TRUCK, 189"MAX. LIFT 4605 HOURS, CLAMP READY (3500LBS.)
HYSTER S155XL2 14000 LBS LPG LIFT TRUCK WITHSIDE SHIFT 147 INCH MAX LIFT, TOTAL HRS 5143.9
KOMATSU MODEL FG25S, 3-STAGE FORKLIFT, PROPANE
HYSTER PIONEER 60, ALL TERRAIN, HEAVY DUTY TOW MOTOR, 2-STAGE, PROPANE, PNEUMATIC TIRE, 6,000 LB. CAPACITY, WITH FRONT MOUNT SNOW BUCKET
Jet-A 450 GPM Towable Hydrant Dispenser for Commercial & Military Aviation, Solar Power Source
Skycart 900 GPM Hydrant Dispenser for Commerical & Military Aviation, Jet Refueler, Kubota DieselEngine, Primary & Secondary Control Valve
Toyota Model 42-4FG25 Forklift, Pneu. Tire, LP, 3-Stage Mast, Side Shift, 4,300 lb. Cap.
Toyota Model 42-5FG25 Forklift Pneu.Tire, LP, 3-Stage Mast, Side Shift, 4,300 lb.Cap.
FORKLIFT, CLARK 8,000 LB. CAP., MDL. IT80, 42"L. FORKS, SGL. STAGE MAST, 138" HT., GASOLINE ENGINE, YARD TIRES
Hyster Elec Stand-Up Forklift, M/N E30CR 3,000 Lb Cap, 106" Height, Solid Tires, 2-Stage Mast, R.O.P.S., 36 Volt, 2077 Hours, w/Charger
Hyster Elec Forklift, M/N E60XL 6,000 Lb Cap, 159" Height, Solid Tires, 3-Stage Mast, R.O.P.S., 48 Volt, Sideshift, 2141 Hours, W/Charger
Clark Propane Forklift, Model G 3,000 Lb Cap, 108" Height, Solid Tires, 2-Stage Mast, R.O.P.S., 1735 Hours
Hyster Model E50XL-27 Fork Lift, 187" Lift, 36 volt, 5000# Cap,
Hyster Mod.120XM 12,000# Gasoline Forklift ?
Hyster Mod.S50 5,000# Propane Forklift
NISSAN APPROX. 5000# CAPACITY GAS OPERATED FORKLIFT TRUCK, SINGLE MAST, HARD TIRES,
DATSUN MODEL QGF02 6000# CAPACITY DIESEL OPERATED FORKLIFT TRUCK, HARD RUBBER TIRES, SINGLE MAST,
CATERPILLAR 8000# CAPACITY DIESEL OPERATED FORKLIFT TRUCK, PNEUMATIC TIRES, DOUBLE MAST, SIDE SHIFTER,
NISSAN MODEL KUGH02 5600# CAPACITY GAS OPERATED FORKLIFT TRUCK, HARD RUBBER TIRES, DOUBLE MAST
NISSAN MODEL KPO1 3000# CAPACITY GAS OPERATEDFORKLIFT TRUCK, HARD RUBBER TIRES, SINGLE MAST,
NISSAN MODEL 60 6000# CAPACITY GAS OPERATED FORKLIFT TRUCK, HARD RUBBER TIRES, DOUBLE MAST,
DATSUN MODEL FO1 TYPE LP GAS OPERATED FORKLIFT TRUCK, HARD RUBBER TIRES, SINGLE MAST,
Toyota Model 42-4FG25 Forklift, Pneu. Tire, LP, 3-Stage Mast, Side Shift, 4,300 lb. Cap.
Toyota Model 42-5FG25 Forklift Pneu.Tire, LP, 3-Stage Mast, Side Shift, 4,300 lb.Cap.
FORKLIFT, CLARK 8,000 LB. CAP., MDL. IT80, 42"L. FORKS, SGL. STAGE MAST, 138" HT., GASOLINE ENGINE, YARD TIRES
Hyster Elec Stand-Up Forklift, M/N E30C 3,000 Lb Cap, 106" Height, Solid Tires, 2-Stage Mast, R.O.P.S., 36 Volt, 2077 Hours, w/Charger
Hyster Elec Forklift, M/N E60XL 6,000 Lb Cap, 159" Height, Solid Tires, 3-Stage Mast, R.O.P.S., 48 Volt, Sideshift, 2141 Hours, W/Charger
Clark Propane Forklift, Model G 3,000 Lb Cap, 108" Height, Solid Tires, 2-Stage Mast, R.O.P.S., 1735 Hours
Hyster Model E50XL-27 Fork Lift, 187" Lift, 36 volt, 5000# Cap
MEC 1932ES Sissor man Lift 500# Cap., 18' 10" Lift, Model 1932 ES, 1998, 24 VDC
Hyster Mod.120XM 12,000# Gasoline Forklift 48" Forklength, 185" Max Height, Solid Tires, Over ? Head Guard
Hyster Mod.S50 5,000# Propane Forklift 48" Forklength, 188" Max Height, Solid Tires, Over ? Head Guard
Crown RD3020-30 3000lb Electric Lift
Raymond EASI 4000lb Electric Lift w/Charger
Raymond EASI 4000lb Electric Lift w/Charger
Raymond 537-CSR30T 3000lb Electric Order Picker Lift w/Charger
TOYOTA 3,000 LB. LIFT TRUCK MODEL 7FGCU18, S/N 62840, LP 189" LIFT SIDE SHIFT SOLID TIRES
KOMATSU 3,580 LB. LIFT TURCK MODEL FG205T-11 188" LIFT LP SOLID TIRES SIDE SHIFT
YALE 4,000 LIFT TRUCK MODEL GLC040AFNUAE082 LP 129" LIFT SIDE SHIFT SOLID TIRES
CLARK 6,000 LB. LIFT TRUCK MODEL G, LP 147" LIFT PNEUMATIC TIRES
HYSTER 25,000 LB. LIFT TRUCK MODEL H250XL DIESEL 161.5" LIFT PNEUMATIC / DUAL FRONT TIRES HEAT CAB
HYSTER 28,000 LB. LIFT TRUCK MODEL H280X. LP 147.6" LIFT FORK SHIFT IN & OUT PNEUMATIC DUAL FRONT TIRES, HEAT CAB
CLARK 4000LB LP FORK TRUCK ENCLOSED CAB, 8,585 HRS, 188" LIFT HEIGHT, MODEL-GPX40, INDOOR/OUTDOOR
Crown Electric Fork Lift Truck, model 35SCTT 3000 lb, 1563 hrs, w/ side-shift, triple-mast, battery & charger
TOYOTA ELECTRIC FORKLIFT 2500LBS CAP WITH 6FT FORK EXTENTIONS 3 STATE MEST. W CHARGER
HYSTER 80 ELECTRIC FORKLIFT 8000LBS CAP WITH 8FT FORK EXTENTIONS & CHARGER
Komatsu Model FG20-6 Rough Terrain Forklift 4,000 lb. Cap., Gas, Manual Transmission, DualWheels on front, 2-Stage Mast
Toyota Model 42-5FG25 Forklift 4,600 lb. Cap., Pneumatic Tires, LP, 3-Stage Mast
MEC Electric Scissor Lift, 30in.x96in. Platform, Charger
3500# Caterpillar 35 GPI LPG Fork Lift, 3 Stage Mast, Side Shift, 42' Forks, Pneumatic Tires, ROPS
5000# Caterpillar 50 LPG Fork Lift, Model GC25, 3 Stage Mast, Side Shift, 42" Forks, ROPS
5000# Yale GLP050RENUAE086 LPG Fork Lift, Side Shift, 3 stage Mast, 42" Forks, Windshield, ROPS
500# Hyundai Model HLF25 II LPG Fork Lift, Side Shift, 3 Stage Mast, 42" Forks, Cab Enclosure, ROPS
YALE MODEL ERC060FCN48SE07 6000# SIT DOWN ELECTRIC FORKLIFT TRUCK, WITH SOLID TIRES, 172'' REACH
Mitsubishi Mdl. FG25 Propane Fired Forklift,5000 Lb. cap., double mast with side shift, Ser. #AF17B00215
Mitsubishi Mdl. EDR36 3000 Lb. Cap. Stand-UpForklift, 36 volt, dual stage mast w/fork extension mode
COMMANDER 750-LB. SCISSOR LIFT W/ ON BOARD CHARGER
5000-LB. ELECTRIC LIFT TRUCK, SOLID TIRES, MODEL ERC050RFN365E084, 42" FORKS, 194" LIFT, 3-STAGE MAST W/ 36-VOLT
3000-LB. LIFT TRUCK, LP, SOLID TIRES,MODEL S30XL, 42" FORKS, 174" LIFT, 3-STAGE MAST
5000-LB. LIFT TRUCK, LP, SOLID TIRES,MODEL 42-6FGCU25, 42" FORKS, 189" LIFT, 3-STAGE MAST
3000-LB. LIFT TRUCK, LP, SOLID TIRES, MODEL GC515, 42" FORKS, 188" LIFT, 3-STAGE MAST
5000-LB. LIFT TRUCK, LP, SOLID TIRES,MODEL S50XC, 42" FORKS, 128" LIFT, 3-STAGE MAST
4000-LB. LIFT TRUCK, LP, SOLID TIRES, MODEL GCS-25-1, 48" FORK, 188" LIFT, 3-STAGE MAST
3000-LB. LIFT TRUCK, LP, SOLID TIRES, MODEL T30D, 36" FORKS, 154" LIFT, 3-STAGE MAST
5000-LB. LIFT TRUCK, LP, SOFT TIRES, MODEL H50XM, 48" FORKS, SIDE SHIFT, 129" LIFT, 2-STAGE MAST
5000-LB. LIFT TRUCK, LP, SOFT TIRES, MODEL H50XM, 48" FORKS, SIDE SHIFT, 129" LIFT, 2-STAGE MAST
8,000-LB. LIFT TRUCK, LP, SOLID TIRES 60" FORKS
60,000-LB. AT 36", 23,800-LB. AT 114" & JIB STAND
LIFT 40/60 LIFT TRUCK,38,200-LB. AT 96" WHEEL BASE, 55,600-LB. AT 146" WHEEL BASE, LP, SOLID TIRES, ROPS
5,800 LB. FORKLIFT MODEL GLP060T 3-STAGE SIDE SHIFT, SOLID TIRES, PROPANE
5,800 LB. FORKLIFT MODEL GLPO60T 3-STAGE SIDE SHIFT, SOLID TIRES, PROPAN
5,800 LB. FORKLIFT, MODEL GLP060T 3-STAGE SIDE SHIFT, SOLID TIRES, PROPANE
4,775 LB. FORKLIFT MODEL C50BXPS 3-STAGE, SIDE SHIFT, SOLID TIRES, PROPANE
4,775 LB. FORKLIFT MODEL C50BXPS 3-STAGE, SIDE SHIFT, SOLID TIRES PROPANE
5,000-LB. FORKLIFT, MODEL H-50XM 2-STAGE, SIDE SHIFT, ALL TERRAINE TIRES, PROPANE
5,000-LB. FORKLIFT, MODEL H-50XM,2-STAGE, SIDE SHIFT, ALL TERRAINE TIRES, PROPANE
Gas Forklift, Type LP, Capacity 1080k
forklift, mdl. FG20S, LP, 4000 lb. capacity
MDL. CGC25 FORKLIFT, 4600 LB. CAP., 189in LIFT HEIGHT, SOLID TIRES, LP GAS AND SIDE SHIFTER
MDL. T80D FORKLIFT,W/ 8000 LB. CAP., TRIPLE MAST, SOLID TIRES, LP GAS
MDL. GLC050 FORKLIFT, 4800 LB. CAP., 189in LIFT HEIGHT W/ SOLID TIRES AND LP GAS
MODEL V-60 FORKLIFT LPG HYDROSTATIC 6000 LB CAPACITY / 2 STAGE MAST / 28-9-15 FR FRONT / 6.5-10 REAR TIRES
MODEL V-40 FORKLIFT LGP HYDROSTATIC 4000 LB CAPACITY / 2 STAGE MAST / 7.0-12FR FRONT / 6.5-10 REAR TIRES
MODEL NRR40 ELECTIRC FORKLIFT C/W CHARGER / 4000 LB
2002 BT MODEL RRB2 ELECTRIC FORKLIFT NO CHARGER / 4000 LB CAPACITY / SOLID TIRES / *IKEA*
MODEL LK8M22 4 CYL PERKINS DSL 8000LB CAPACITY / 2 STAGE MAST / SIDE SHIFT / 16.9-24.0 FRONT / 11:00-16 REAR TIRES / *CORRPRO CANADA*
MODEL 50 4 CYL GAS HYDROSTATIC 5500LB CAPACITY / 2 STAGE MAST / 12-16NHS FRONT / 9.5-15L REAR TIRES
ELECTRIC PLATFORM SCISSOR LIFT MODEL KRX20 W/ BUILT IN CHARGER
3,500 LB. ELECTRIC FORKLIFT ROPS SIDE SHIFT SOLID TIRE W/ CHARGER
5,000 LB. ELECTRIC FORKLIFT ROPS SIDE SHIFT SOLID TIRE W/ CHARGER
AC 4480 LB. FORKLIFT LP ROPS SIDE SHIFT SOLID TIRE
AC 4480 LB. FORKLIFT LP ROPS SIDE SHIFT SOLID TIRE
AC 4480 LB. FORKLIFT LP ROPS SIDE SHIFT SOLID TIRE
AC 4480 LB. FORKLIFT LP ROPS SIDE SHIFT SOLID TIRE
4900 LB. FORKLIFT LP ROPS SIDE-SHIFT CUSHION TIRES
8,000 LB. FORKLIFT LP ROPS SIDE SHIFT SOLID TIRE
8000 LB. FORKLIFT LP-ROPS SIDE SHIFT SOLID TIRE
del ME030LAN12CS090 Electric Walk Behind Forklift, 3,000 lb. Cap, 12-Volt, Charger
Forklift, Est. 10,000 lb. Cap., LP, Hard Tire, 3-Stage Mast, 5 Ft. Forks
Hyster Model S150A Forklift 15,000 lb. Cap., LP, Hard Tire, New Tires, 2-Stage Mast, 6Ft. Forks
Model GLC060TENUAE083 Forklift , 6,000 lb. Cap., LP, Hard Tire, 3-Stage Mast, 42 In.Forks
ELECTRIC SNORKEL LIFT 500 LB CAP MODELZ 30/20 HD PLATFORM HT. 31'
Forklift, Propane, 5,000 Lb Capacity, Side Shift Attachment, 189" Height, Solid Tires, m/n FCG25F9, Hours: 7,659
Forklift, Propane, 2,650 Lb Capacity, Side Shift Attachment, 189" Height, m/n FCG18T8T, Hours: 4,783
Electric Fork Truck Mycros 13C 2500LB Capacity
V160D 6000LB Fork Truck Propane
COSEN AH-7652H HORIZONTAL AUTOMATIC HYDRAULICDOWNFEED BANDSAW, 24'' MAX. CAPACITY, 7-1/2 HP MOTOR, 42-390 FPM, HYDRAULIC SHUTTLE, PROGRAMMABLE FOR MULTIPLE PULLS, COMPLETE WITHHYDRAULIC AUTOMATIC CLA
Schleuniger OC 3950 cutter with Schlenniger PF2000 pay off pre-tensioner machine.
Stryker Tower laparoscopy system SB 2 definition with 19 in. flat panel Comprises Stryker tower Stryker 40L highflow insufflator mod 40H Stryker SDC HD high definition digital capture module mod SDHD
C & M MODEL 60-HD VERTICAL BALER C & M MODEL 60-HD VERTICAL BALER / COMPACTOR
GARDNER DENVER AIR DRYER GARDNER DENVER MODEL RNG150A2 150 SCFM Refrigerated Compressed Air Dryer
GARDNER DENVER AIR COMPRESSOR GARDNER DENVER MODELL EBH996 50 HP Electra Saver II Skid Mounted Air Compressor
JOHN BROWN MODEL 2025 THERMOFORMER JOHN BROWN MODEL 2025 Thermoformer With 20" x 25" Capacity, Athena Digital Controls
JOHN BROWN MODEL 2025 THERMOFORMER JOHN BROWN MODEL 2025 Thermoformer With 20" x 25" Capacity, Athena Digital Controls
BAUMER HFS 11 CONTOUR SAW ALBRECTH BAUMER TYPE HFS 11 CONTOUR CUTTING SAW
FORREST MODEL 480 HORIZONTAL BLOCK / FOAM SAW FORREST MODEL 480 HORIZONTAL BLOCK / FOAM SAW
EDGE MODEL 10-84-VB FOAM SAW EDGE MODEL 10-84-VB 84" Horizontal Rolling Table Foam Saw With 84" w x 146" Table
EDGE MODEL E-2 FOAM SAW EDGE VERTICAL ROLLING TABLE FOAM SAW MODEL E2 72" Max. Between Frame & Fence, 120" x 137" Table
EDGE MODEL C-2 FOAM SAW EDGE MODEL C-2 48" Vertical ROLLING TABLE Foam Saw S/N 500580 With 96" w x 89" L Table
EDGE MODEL 10 FOAM SAW EDGE MODEL 10 HORIZONTAL ROLLING TABLE FOAM SAW With 72" W x 96" L Cutting Table
EDGE SWEETS MODEL A-1 FOAM SAW EDGE SWEETS MODEL A-1 Vertical Rolling Table Foam Saw : With 80" Wide x 132" L Cutting Table, Fence
TTARP MODEL HL-609 60" Heat Laminating System Powered Infeed Roller, 4" x 62" Laminating Capacity, 12' Infeed Table with Powered Infeed, 48" Outfeed Table With Powered Wind-Up, Maximum 400 Degree F H
TTARP MODEL P3232PC20 45 Ton DIE CUTTER 32" x 32" Platen, 4" Thick Cutting Capacity, 7" Max Daylight, 7' 7" Infeed Conveyor Length With Dual Cutting Guides, 7' 7" Outfeed Conveyor Length, 29" Wide Co
TTARP MODEL P3228PC20B 45 Ton DIE CUTTER 28" x 32" Platen, 4" Thick Cutting Capacity, 7" Max Daylight, 7' 7" Infeed Conveyor Length With Dual Cutting Guides, 7' 7" Outfeed Conveyor Length, 29" Wide
GUIDOLIN DAVIDE MDL GD654 D 35 Ton DIE CUTTER GUIDOLIN DAVIDE MODEL GD 654 D 35 Ton Die Cutting / Kiss Cutting Machine (2003): Powered Unwind & Rewind Stands, 600 mm x 600mm Cutting Surface, 30-100
SHODA MODEL NC516V-1632 CNC MACHINING CENTER SHODA MODEL NC516V-1632 CNC VERTICAL MACHINING CENTER (1995): With 51" x 82" Table With Vacuum Holddown, 16-Position Automatic Tool Changer, ITO Model IRS-
SHODA MODEL NC516P-2134 FOUR HEAD CNC ROUTER SHODA MODEL NC516P-2134 FOUR HEAD CNC ROUTER (2002): With Dual 62" x 102" Tables With Vacuum Holddown, (4) 3.5 KW Router Heads With 2 KW Piggyback Heads, (
TYLER MODEL 1988-79 48" LAMINATING PRESS TYLER MODEL 1988-79 48" Wide Laminating Press
TURNER MODEL R721 LEATHER SPLITTER / SKIVER TURNER MODEL R721 LEATHER SPLITTER / SKIVER
APPLETON MODEL A300 AUTOMATIC CORE CUTTER APPLETON MODEL A300 AUTOMATIC CORE CUTTER
EDGE MODEL C-2 FOAM SAW EDGE MODEL C-2 TILTING VERTICAL ROLLING TABLE Foam Saw
BEVEL GEAR BLANK CHECKER, GLEASON MDL. 15, 10" MAX. NOMINAL PITCH CIRCLE DIA., FACE ANGLE & BACK ANGLE INSPECTION AXES
KODAK DIGI MASTER E150 PRODUCTION SYSTEM (6) PAPER BINS, E SERIES PRINTER, 1150 FINISHER, BOURG HCSK ACCESS STACKER, BOURG BDF STITCHER, FOLDER TRIMMER, #2
2006 HP INDIGO 5000 6-COLOR DIGITAL PRESS W/ DONALDSON ULTRAFILTER
HP DESIGN JET 5000 PS WIDE FORMAT PRINTER W/ASSORTED INKS & SPARE HEAD
CANON IMAGE PROGRAF IPF8000S LARGE FORMAT PRINTER
ROLAND XC-540 SOLJET PRO III PRINT & CUT SIGNMAKER 12-COLOR
FLETCHER 3100 WALL MOUNTED CUTTER
1999 GBC PRO-TECH F-60 PLUS 60" LAMINATOR
1984 POLAR 76EM PAPER CUTTER, 30"
SCREEN PLATE-RITE PT-8100 CTP,RAMPAGE SHOOTER
2006 KODAK TRENSETTER 800II CTP AUTO LOADER, STACKER, POLY CHROME PLATE PROCESSOR, DELL POWER EDGE SERVER
1997 HEIDELBERG SM102-6-P3 28 1/4" X 40 1/2"SPEEDMASTER 6-COLOR OFFSET PRESSPERFECTOR, TECHNOTRANS AQUA PRESS CENTRAL FOUNTAIN TANK, SEMI AUTO PLATE CHANGE, CPC104, MIDLAN I-R DRYER, 113 MIL IMPRESSIO
1995 HEIDELBERG SPEEDMASTER SM74-9-P3 20.5 X29 1/8" SPEEDMASTER 6-COLOR OFFSET PRESS PERFECTOR, 107 MIL. IMPRESSIONS
AB DICK 9985 FULL 2-COLOR OFFSET PRESS, 11" X17" 79 MIL. IMP., CRESTLINE DAMPENING
1997 HALM JET JP-TWOD-6D SUPERJET 2-COLOR PERFECTOR HS ENVELOPE PRESS, BOTTOM FEEDER
2006 HEIDELBERG PM-52-5-P PRINTMASTER 20" 5-COLOR OFFSET PRESS PERFECTOR BETWEEN 2/3, BALDWIN CENTRAL FOUNTAIN TANK, BALDWIN GRAPHISET I-R DRYER, CPC CLASSIC CENTER CONSOLE, EASYPLATE PLATE CHANGER, P
CROWN RR5010-35, 3.500# NARROW AISLE FORKLIFT 210" LIFT, REACH FRONT, 202 HRS. W/ EXIDE LOAD HOG CHARGER
GBC/SICKINGER USP13 UNIVERSAL SPEED PUNCH
POLAR L600W-3 CLASSIC LIFT, 4,000# CAP
2006 POLAR 115X PAPER CUTTER 451/4", AIR TABLES
2005 STANDARD HORIZON AFC-546-AKT 21" X 29" CROSS FOLDER (6) AUTOMATED BUCKLE FOLD PLATES, KNIFE FOLD, LOWER BUCKLE PALTE, AFC-544AKT
ROSBACK 240 AIR FED PERFORATOR,PILE FED
HHS C-420 COLD GLUE SYSTEM
2007 MBO Z2 KNIFE FOLDER
2006 MBO B21-C, 21 X 33" CONT. FED FOLDER B21-2-21/4 8-PAGE ANGEL, TECHNIFOLD TRI CREASE ATTACHMENT, HANG-ON A56
Lot 81: 2007 MBO B30E-30/6, 30" X 50" CONT. FED 6/4/4FOLDER, B30E-2-30/4 8 PAGE, B26E-3-15/4 16 PAGE UNIT, A76 STACKER
ADVENT AAT-92 AUTOMATIC PILE FED TAB LAMINATE& DIE CUT MACHINE
SICKINGER STL-1000 TWIN LOOP BINDER
1986 POLAR 76-EM 30" PAPER CUTTER
HORIZON HT-70 3-KNIFE TRIMMER
HORIZON BQ440 4-CLAMP PERFECT BINDER 1MM - 40MM
FORKLIFT, HYSTER 6,000 LB. CAP., MDL. H60C, LP GAS ENGINE, OIL CLUTCH TRANS., 12 INCH LIFT, 48 INCH FORKS, FORK POSITIONERS
FORKLIFT, TCM 6,000 LB. CAP., MDL. FGC30-4HL,LP PWRD., 130" MAX. LIFT HEIGHT, 42"L. FORKS, SIDE-SIFTER
FORKLIFT, CLARK 8,000 LB. CAP., MDL. C500Y80S, LP PWRD., 8,000 LB. @ 24" LOAD CENTER, 147" MAX. LIFT HEIGH
FORKLIFT, HYSTER 10,000 LB. CAP., MDL. H100XL, LP GAS ENGINE, AUTO. TRANS., 11 FOOT LIFT, 48 INCH FORKS, FORK
ROUGH TERRAIN FORKLIFT, KD MANITOU MDL. M230CP, DIESEL PWRD., 5,500 LB. @ 24" LOAD CENTER, 180" MAX. LIFT, 3,475 LB. @ 24" LOAD CENTER, 264" MAX. LIFT, MDL. 4524-4595-4543 3-STAGE MAST, 42"L. FORKS, S
ROUGH TERRAIN FORKLIFT, KD MANITOU MDL. S502TC-D, NEW 1994, DIESEL PWRD., 5,000 LB. @ 24" LOAD CENTER, 144" MAX. LIFT, 2,750 LB. @ 24" LOAD CENTER, 252" MAX. LIFT, MDL. 2308-2387-2339 3-STAGE MAST, SI
ROUGH TERRAIN FORKLIFT, CASE MDL. 586E, 6,000LB. CAP., DIESEL PWRD., 48"L. FORKS, 2-STAGE SIDE-SHIFT 22" MAST, SIZE: 19.5L-24 ROUGH TERRAIN TIRES
ROUGH TERRAIN FORKLIFT, CASE MDL. 586C, 6,000LB. CAP., DIESEL PWRD., 48"L. FORKS, 2-STAGE SIDE-SHIFT 22" MAST, SIZE: 19.5L-24 ROUGH TERRAIN TIRES
FORKLIFT, HYSTER 35,000 LB. CAP., MDL. H350B,35,000 LB. @ 24" LOAD CENTER, DIESEL ENGINE, AUTO. TRANS., CAB W/HEAT, 8" FORKS, SIDE-SHIFTER
SIDE-LOADER FORKLIFT, ELWELL PARKER SHAWLOADER 60,000 LB. CAP., 20' TTL. BED LENGTH, 8'L. FORKS, HYD. OUTRIGGER SUPPTS., MDL. 560, CUMMINS DIESEL ENGINE, 2-STATION OPERATOR"S CONTORL PULPIT
ARTICULATED WHEEL LOADER, CATERPILLAR MDL. 980, ALL WEATHER CAB, 48" X 124" BUCKET, MICHELIN 26.5R25 TIRES
HYDRAULIC ROUGH TERRAIN CRANE, LINKBELT MDL.YC18, MDL. LH318 6 CYL. 95 HP GASOLINE ENGINE, 18,000 LB. @ 6' RADIUS, HYD. OUTRIGGERS, SIZE: 14.00-24 R0UGH TERRAIN TIRES, HYD. 3-SECTION BOOM, 22' OVERALL
HYDRAULIC ROUGH TERRAIN CRANE, LORAIN MDL. ERI-180, 40,000 LB. G.V.W.R., DETROIT DIESEL ENGINE, HYD. 45' 3-SECTION BOOM, SIZE: 17.5-25 ROUGH TERRAIN TIRES, SWING-UP FLY BOOM, 15.12" GROUND CLEARANCE,
PLATE BLASTING MACHINE, PANGBORN ROTOBLAST MDL. ES1707, 9' WORK OPENING, 2' MAX. PART HEIGHT, (4) MDL. RK 20 HP BELT DRIVEN BLAST HEADS, 100"W. X 30'L. VARIABLE SPD. PWR. ROLLER INFEED CONVEYOR, (9) 1
HORIZONTAL BANDSAW, W.F. WELLS MDL. B-25-2, 1-1/2" BLADE SIZE, 24" MAX. CUTTING DIA., 25" X 40" MAX. RECTANGULAR CAP., 60 DEG. PWR. MITER, DUAL VISE CLAMPING ARRANGEMENT, VARIABLE SPD. BLADE DRIVE, 30
CNC COORDINATE RAIL DRILL, HEARN MDL. SDT7BE,HUNT GM-3000 PC BASED CNC CONTROL, 72" MAX. DRILLING WIDTH, 144" MAX. DRILLING LENGTH, DRILL SPDS: 75-1200 RPM, H.D. GEARED HEAD DRILL DRIVE, FABRICATED ST
HYDRAULIC SHEAR, PACIFIC 10'-1", MDL. 1000R10, 8' SQUARING ARM, FRONT OPERATED PWR. BACKGAUGE W/INDICATOR, 16" THROAT DEPTH, 8' X 10' BALL FIELD TABLE
HYDRAULIC PRESSBRAKE, CINCINNATI 400 T. X 10', 16' OVERALL LENGTH OF BED & RAM, 10"-6" DIST. BTN. HOUSINGS, 18" STROKE, 8"W. BED W/REMOVABLE BED FLANGES, 19" THROAT DEPTH, (4) REAR SUPPT. ARMS, ELEC.
IRONWORKER, MUBEA MDL. KBL-104-7F, 2" ROUND BAR CAP., 4" X 4" X 3/8" ANGLE SHEAR CAP., 10" X 1/2" PLATE SHEAR CAP., 2-3/8" SQ. BAR CUTTING CAP., 20" THROAT DEPTH, COPING ATTACH., CHANNELS HEAR BLADES,
SINGLE END PUNCH, PIRANHA 120 T. CAP., MDL. SEP20, 21-1/2" THROAT DEPTH, 26"W. X 22" F-B SCALE GAUGING TABLE, 10 HP INDEPENDENT HYD. PWR. SUPPLY UNIT, FOOT PEDAL CONTROL, ASSORTED PUNCHES & DIES
Somero Copperhead Model S-9210 Laser Screed w/10 ft. Head & 8 ft. Head
GAGE MASTER MODEL 29/GMX IES, 13'' OPTICAL COMPARATOR WITH COMPUTER CONTROLS, & 4'' X 15'' TABLE
ULTRAMATIC MODEL SVD 3.5 30'' DIAMETER VIBRATORY BOWL FINISHER WITH POLY LINER, FEED/DAM
ROTO-FINISH MODEL JOB H 1886 56'' DIAMETER VIBRATORY BOWL FINISHER WITH POLY LINER, FEED/DAM, CONTROLS WITH TIMER
HURRICANE MODEL 5024 STAINLESS STEEL PASS-THRU PARTS WASHER, W/R/BO WITH 24'' WIDE S.S. CONVEYOR, APPROXIMATELY 22'' HIGH CAPACITY, DRY-OFF, WASH & RINSE PUMPS
TDK/KANETIC MODEL CLM-03 KLS0021 A, 2-AXIS CNC LASER MARKER WITH 10W, CLASS 4 LASER EMITTER, 75MM X 75MM MARKING RANGE, 0.4 ~ 30MM CHARACTER HEIGHT AND WIDTH, 1000MM/S (MAX.) MARKING SPEED, X AND Y VA
TECHNO WASINO MODEL JI CNC TURNING/CHUCKING CENTER WITH S.ROBO-0 GANTRY AND FANUC 21I-T CNC CONTROL
TECHNO WASINO MODEL J5 CNC TURNING/CHUCKING CENTERS WITH 8'' 3-JAW CHUCKS, 16.5'' SWING, 12- POSITION TURRETS, CHIP CONVEYORS, SPINDLE SPEEDS TO 3000RPM, S.ROBO-1 GANTRY PARTS LOADERS/UNLOADERS, FANUC
TECHNO WASINO MODEL J5 CNC TURNING/CHUCKING CENTERS WITH 8'' 3-JAW CHUCKS, 16.5'' SWING, 12 POSITION TURRETS, CHIP CONVEYOR, SPINDLE SPEEDS TO 3000RPM, S.ROBO-1 GANTRY PARTS LOADERS/ UNLOADERS, FANUC
TECHNO WASINO MODEL J5 CNC TURNING/CHUCKING CENTERS WITH 8'' 3-JAW CHUCKS, 16.5'' SWING, 12- POSITION TURRETS, CHIP CONVEYOR, SPINDLE SPEEDS TO 3000RPM, S.ROBO-1 GANTRY PARTS LOADERS/ UNLOADERS, FANUC
MONARCH MODEL VMC-20V VERTICAL HIGH SPEED LIGHT MILLING & TAPPING CENTER WITH (2) 15'' X 25 1/2'' PALLETS & PALLET CHANGERS, 16-POSITION ATC, #30 TAPER SPINDLE SPEED TO 15000RPM, 19.7'' X AXIS TRAVEL,
MONARCH MODEL VMC-20V VERTICAL HIGH SPEED LIGHT MILLING & TAPPING CENTER WITH (2) 15'' X 25 1/2'' PALLETS & PALLET CHANGERS, 16-POSITION ATC, #30 TAPER SPINDLE SPEED TO 15000RPM, 19.7'' X AXIS TRAVEL,
DEKA MODEL HRG 122228 DRILL WITH CAPACITY UPTO 24 SPINDLES, ADJUSTABLE TABLE
TIMESAVERS MODEL 960-1MW 9'' WIDE WET BELT SANDER, WITH VARIABLE FEED SPEEDS & HEIGHT ADJUSTMENT, PAPER FILTRATION,
SMW SPACE SAVER 2200 MAGAZINE BAR FEEDER, MODEL SPAC.2200 MFG 2006
MORI SEIKI MODEL SL-25B/500 CNC SLANT BED TURNING CENTER WITH 10'' 3-JAW CHUCK, 2.75'' BAR CAPACITY, 25'' CENTER DISTANCE, 13.78'' SWING, 10-POSITION TURRET, CHIP CONVEYOR, FANUC 10
SMW SPACE SAVER 2200 MAGAZINE BAR FEEDER, MODEL ML-565
MORI SEIKI MODEL F-L2 CNC SLANT BED TURNING CENTER WITH 10'' 3-JAW CHUCK, 13.5'' TURNING CAPACITY, 2 5/8'' BAR CAPACITY, 27'' CENTER DISTANCE, 10-POSITION TURRET, TOUCH PROBE, PARTS CATCHER AND CONVE
MORI SEIKI MODEL SL-35B/750 CNC SLANT BED TURNING CENTER WITH 12'' 3-JAW CHUCK, 23.6'' SWING, 35'' CENTER DISTANCE, 3.5'' BAR CAPACITY, 10-POSITION TURRET, CHIP CONVEYOR, MORI SEIKI MF-T6 CNC CONTROL
SMW SPACE SAVER 2200 MAGAZINE BAR FEEDER, MODEL SPAC.2200,MFG 2007
MORI SEIKI MODEL SL-35B/750 CNC SLANT BED TURNING CENTER WITH 12'' 3-JAW CHUCK & COLLET SPINDLE NOSE, 23.6'' SWING, 35'' CENTER DISTANCE, HYDRAULIC STEADY REST, 3.5'' BAR CAPACITY, 10-POSITION TURRET,
SMW SPACE SAVER 2200 MAGAZINE BAR FEEDER, MODEL SPAC.2200, MFG 2006
MORI SEIKI MODEL SL303A/700 CNC SLANT BED TURNING CENTER WITH 12'' 3-JAW CHUCK, 32'' CENTER DISTANCE, 12-POSITION TURRET, RENISHAW TOUCH PROBE, PARTS CATCHER & CONVEYOR, CHIP CONVEYOR, MORI SEIKI MSG
MITSUBISHI MODEL M-H40C HORIZONTAL MACHININGCENTER WITH (2) 16'' X 16'' PALLETS, 360 DEGREE ROTATION, #40 TAPER SPINDLE SPEEDS TO 4000RPM, 22'' X AXIS TRAVEL, 23.6'' Y AXIS TRAVEL, 24.4'' Z AXIS TRAVE
MORI SEIKI MODEL MH-50 HORIZONTAL MACHINING CENTER WITH (2) 19 3/4'' X 19 3/4'' PALLETS, 360 DEGREE ROTATION, #50 TAPER SPINDLE SPEEDS TO 6000RPM, 31.5'' X AXIS TRAVEL, 25.6'' Y AXIS TRAVEL, 29.5'' Z
KAESER MODEL KRD 400 AIR DRYER, WITH RECEIVING TANK
KAESER MODEL CS 121 ROTARY SCREW AIR COMPRESSOR, 100HP, 110 PSIG, 458 CFM
MORI SEIKI MODEL SL-5 CNC SLANT BED CHUCKER WITH 12'' 3-JAW CHUCKS, 25'' SWING, 12-POSITION TURRET, CHIP CONVEYOR, FANUC 6T CNC CONTROL
MATSUURA MODEL RA-IIF VERTICAL MACHINING CENTER WITH (2) 15'' X 23 1/2'' PALLETS & PALLET CHANGER, #40 TAPER SPINDLE SPEEDS TO 8000RPM, 23.62'' X AXIS TRAVEL, 16.14'' Y AXIS TRAVEL, 18.5'' Z AXIS TRAV
DEKKERMATIC MODEL MCV-550D V-2 VERTICAL MACHINING CENTER WITH 16'' X 33'' TABLE, #40 TAPER SPINDLE SPEEDS TO 8000RPM, 16.5'' X AXIS TRAVEL, 11.8'' Y AXIS TRAVEL, 11.8''/9.8'' Z AXIS TRAVEL, ENCLOSURE,
MORI SEIKI MODEL MV-55/50 VERTICAL MACHININGCENTER WITH (2) 20 1/2'' X 55'' PALLETS & PALLET CHANGER, #50 TAPER SPINDLE SPEEDS TO 4000RPM, 41.34'' X AXIS TRAVEL, 21.65'' Y AXIS TRAVEL, 22.05'' Z AXIS
MORI SEIKI MODEL MV-40/40 VERTICAL MACHININGCENTER WITH (2) 15'' X 35'' PALLETS & PALLET CHANGER, #40 TAPER SPINDLE SPEEDS TO 4000RPM, 31.5'' X AXIS TRAVEL, 16.19'' Y AXIS TRAVEL, 20.12'' Z AXIS TRAV
MORI SEIKI MODEL MV-40 B VERTICAL MACHINING CENTER WITH (2) 15'' X 35 1/2'' PALLETS & PALLET CHANGER, #40 TAPER SPINDLE SPEEDS TO 8000RPM, 31.5'' X AXIS TRAVEL, 16.14'' Y AXIS TRAVEL, 20'' Z AXIS TRAV
KAESER MODEL SMII AIR COMPRESSOR
KAESER KRD 300 AIR DRYER
KAESER MODEL SIGMA PROFILE AS30, 25 HP ROTARYSCREW AIR COMPRESSOR, 110 PSIG, 115 CFM
KAESER MODEL SIGMA PROFILE AS30, 25HP ROTARYSCREW AIR COMPRESSOR, 110 PSIG, 115 CFM
MORI SEIKI MODEL TV-30 VERTICAL HIGH SPEED LIGHT MILLING & TAPPING CENTER WITH (2) 11 3/4'' X 19 3/4'' PALLETS & PALLET CHANGERS, 10 POSITION ATCS, #30 TAPER SPINDLES SPEED TO 8000RPM, 16.5'' X AXIS T
MORI SEIKI MODEL TV-300 VERTICAL HIGH SPEED LIGHT MILLING & TAPPING CENTER WITH (2) 11 3/4'' X 19 3/4'' PALLETS & PALLET CHANGERS, 20 POSITION ATC, #20 TAPER SPINDLE SPEED TO 8000RPM, 16.5'' X AXIS TR
MITUTOYO MODEL CRYSTA-APEX C 574CNC CMM W/19.88'
MORI SEIKI MODEL SH-50 HORIZONTAL MACHINING CENTER WITH (3) 19 3/4'' X 19 3/4'' PALLETS, .001/1.0 DEGREE ROTATION, #40 TAPER SPINDLE SPEEDS TO 12000RPM, 24.8'' X AXIS TRAVEL, 23.6'' Y AXIS TRAVEL, 25.
MORI SEIKI MODEL SH-50 HORIZONTAL MACHINING CENTER WITH (3) 19 3/4'' X 19 3/4'' PALLETS, .001/1.0 DEGREE ROTATION, #40 TAPER SPINDLE SPEEDS TO 12000RPM, 24.8'' X AXIS TRAVEL, 23.6'' Y AXIS TRAVEL, 25.
MORI SEIKI MODEL SH-50 HORIZONTAL MACHINING CENTER WITH (2) 19 3/4'' X 19 3/4'' PALLETS, .001/1.0 DEGREE ROTATION, #40 TAPER SPINDLE SPEEDS TO 12000RPM, 24.8'' X AXIS TRAVEL, 23.6'' Y AXIS TRAVEL, 25.
MORI SEIKI MODEL SH-50 HORIZONTAL MACHINING CENTER WITH (2) 19 3/4'' X 19 3/4'' PALLETS, .001/1.0 DEGREE ROTATION, #40 TAPER SPINDLE SPEEDS TO 12000RPM, 24.8'' X AXIS TRAVEL, 23.6'' Y AXIS TRAVEL, 25.
MITSUBISHI MODEL MH4A HORIZONTAL MACHINING CENTER WITH (2) 16'' X 16'' PALLETS, 360 DEGREE ROTATION, #40 TAPER SPINDLE SPEEDS TO 10000RPM, 22'' X AXIS TRAVEL, 20'' Y AXIS TRAVEL, 19.7'' Z AXIS TRAVEL,
MONARCH VMC 150B VERTICAL MACHINING CENTER WITH (2) 30'' X 60'' PALLETS & PALLET CHANGER, #50 TAPER SPINDLE SPEEDS TO 6000RPM, 50'' X AXIS TRAVEL, 30'' Y AXIS TRAVEL, 36'' Z AXIS TRAVEL, 40ATC, DUAL C
MORI SEIKI MODEL MV-653/50 VERTICAL MACHININGCENTER WITH (2) 24'' X 67'' PALLETS & PALLET CHANGER, #50 TAPER SPINDLE SPEEDS TO 6000RPM, 60'' X AXIS TRAVEL, 25.9'' Y AXIS TRAVEL, 25.5'' Z AXIS TRAVEL,
EDM SOLUTIONS MODEL CR-7, 16 AMP, HOLE POPPERWITH 12'' X 24'' WORK TABLE, ALL VARIABLE SPEEDS, FEEDS, CREATOR CJ100D PLC CONTROL WITH D.R.O AND HEIDENHAIN X/4 D.R.O
BAASEL LASERTECH STARMARK 65 2-AXIS CNC LASERMARKER, 65 WATT LASER CONVEYOR, WORK TABLE, LASER ENCLOSURE
JONES & SHIPMAN 1310 MODEL 63594 UNIVERSAL CYLINDRICAL GRINDER WITH SWING-DOWN INTERNAL ATTACHMENT, 8'' X 20'' CAPACITY
PROTH MODEL PSGS 3060BH 12'' X 24'' HYDRAULICSURFACE GRINDER, ELECTROMAGNETIC CHUCK
KBC GRIP-1340G 13'' X 40'' ENGINE LATHE, 8''3-JAW CHUCK SPEEDS TO 2000RPM, INCH/METRIC THREADING
ECONOMASTER MODEL GW1440 14'' X 36'' ENGINE LATHES, SPINDLE SPEEDS TO 1800RPM, INCH/METRIC, 5C COLLET WITH SPINDLE NOSE
TOS MODEL SN50C GAP BED ENGINE LATHE, 20''/28'' X 82'' CENTERS, 12'' 3-JAW CHUCK, TAPER ATTACHMENT SPINDLE SPEEDS TO 2000RPM, INCH/METRIC THREADING
SUPERMAX MODEL YCM-16VS 2-AXIS CNC KNEE MILL,9'' X 54'' TABLE, R-8 SPINDLE WITH VARIABLE SPEEDS TO 4200RPM, KURT POWER LOCK, TRACK A.G.E 2 CNC CONTROLS
TOS MODEL SN55B GAP BED ENGINE LATHE, 22''/30'' SWING X 164'' CENTERS, WITH 16'' 4-JAW CHUCK, SPINDLE SPEEDS TO 1000RPM, INCH/METRIC THREADING, 3'' BORE
PEERLESS MODEL C-33A, AUTOMATIC FEED HORIZONTAL BAND SAW WITH ROLL FEED VISE, 12'' X 10'' CAPACITY, VARIABLE BLADE SPEEDS
BEHRINGER MODEL HBP303A AUTOMATIC HORIZONTALBAND SAW WITH BUNDLE ATTACHMENT, 13'' X 13'' CAPACITY, 1 1/2'' BLADE WIDTH, POST DESIGN, CHIP CONVEYOR, VARIABLE BLADE SPEEDS, BEHRINGER PLC CONTROLS
DOALL MODEL 1611-H 16'' VERTICAL BAND SAW WITH BUTT WELDER & GRINDING ATTACHMENT, 24'' X 30'' HYDRAULIC FEEDING TILT TABLE, VARIABL
Haulotte Ciseaux Compact 12 battery electric 12m scissor lift Year: 2004
Haulotte Cissaux H12SX diesel driven 4 wheel drive 12m scissor lift Year: 2004
Haulotte Ciseaux H18SX diesel driven 4 wheel drive 18m scissor lift Year: 2004
Haulotte Ciseaux H12SX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 663
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2005 Hours: 749
Haulotte Ciseaux H12SX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2004 Hours:
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2004 Hours: 1723
Haulotte Ciseaux H12SX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours:
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2005 Hours: 809
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2005 Hours: 456 Fleet No: DS463 c/w Hydraulic stabiliser legs slide out extending platform (double end)
Haulotte Ciseaux H18SX diesel driven 4 wheel drive 18m scissor lift Year: 2005 Hours: 160
Haulotte Ciseaux H15SX diesel driven 4 wheel drive 15m scissor lift Year: 2004 Hours: 871
Haulotte Articulee HA16PXNT diesel driven 4 wheel drive 16m articulated boom lift Year: 2004 Hours:
Haulotte Ciseaux BR Compact 12DX diesel driven scissor lift Year: 2004
Haulotte Ciseaux BR Compact 12DX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 823
Haulotte Ciseaux BR Compact 12DX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 1171
Haulotte Ciseaux BR Compact 12DX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 1036
Haulotte Ciseaux BR Compact 10DX diesel driven 4 wheel drive 10m scissor lift Year: 2004 Hours: 1411
Haulotte Ciseaux BR Compact 10DX diesel driven 4 wheel drive 10m scissor lift Year: 2004 Hours: 622
Haulotte Ciseaux BR Compact 10DX diesel driven 4 wheel drive 10m scissor lift Year: 2004 Hours: 1041
Haulotte Ciseaux BR Compact 12DX diesel driven 4 wheel drive 12m scissor lift Year: 2004 Hours: 1105
Seewer Rondo SSO 62 Ecostar, sheeter with automatic flour duster, width of conveyor belts 615mm, table length overall
Polin Roto gas fired rack oven type 8080891SC type 411157/AM/050 415v 3 phase 50Hz 2.6Kw digital controller
Esmach ISE 160A spiral mixer removable bowl 160kg capacity
Kemper spiral mixer type SP50 L max. 50 kg flour, 2 speeds, 2 timers stainless steel bowl + spiral, safety device 415 v, 3 phases, 50 cycles
Esmach ISE/F 130F spiral mixer with approx. kg. 130 dough capacity approx. kg. 75-80 flour capacity
Seewer SFS6S pastry brake width of conveyor belts 640 mm table length overall 2720 mm roller length 660 mm
Compumill Mod HMC 410 Horz 4 Axis CNC MachineCenter
Compumill Mod HMC 410 Horz 4 Axis CNC MachineCenter
MAZAK HTC400 CNC HORIZONTAL MACHINING CENTER
MAZAK VTC200B CNC VERTICAL MACHINING CENTER
Moore Mod.G18 Precision Jig Grinder
Okamoto Mod. Accugar124N 12 x 24 Hyd. SurfaceGinder
Mazak Ace 17 22 x 60 Geared Gap Lathe
Clausing Colchester Triumph 2000 15 23 x 50 Geared Gap Lathe
Hardinge Mod. HC Chucker
Hardinge Mod DSM 59 Second Operation Lathe
NISSAN MDL- CWGP02L305 FORKLIFT, ELECTRIC, DUAL PALLET FORKS, 3530 LB CAP., CUSHION TIRES, 8464 HRS.,
NISSAN MDL- CWGP02L305 FORKLIFT, ELECTRIC, DUAL PALLET FORKS, 3530 LB CAP., CUSHION TIRES, 4638 HRS
NISSAN MDL- CWGP02L305 FORKLIFT, ELECTRIC, DUAL PALLET FORKS, 3530 LB CAP., CUSHION TIRES, 5069 HRS.,
NISSAN OPTIMUM 30 MDL- PJ01A15PV FORKLIFT, LPG PROPANE, 3300 LB CAP., CUSHION TIRES, 11663 HRS.,
NISSAN OPTIMUM 60 UGJ02A31PV FORKLIFT, LPG PROPANE, 4300 LB CAP., CUSHION TIRES, 10126 HRS.,
NISSAN 50 MDL- MPL02A25LV FORKLIFT, LPG PROPANE, 4750 LB CAP., CUSHION TIRES, 5157 HRS
NISSAN 55 MDL- MCPL02A28LV FORKLIFT, LPG PROPANE, 5000 LB CAP., CUSHION TIRES
NISSAN 30 MDL- MCP01A15LV, FORKLIFT, LPG PROPANE, 2550 LB CAP., CUSHION TIRES,
NISSAN OPTIMUM 50 MDL- CP102A25PV FORKLIFT, LPG PROPANE, 4750 LB. CAP., CUSHION TIRES, 11662 HRS
NISSAN OPTIMUM 80 MDL- BF03A35V FORKLIFT, LPGPROPANE, 6775 LB. CAP., CUSHION TIRES, 6933 HRS.
NISSAN OPTIMUM 60 MDL-UGJ02A3OEV FORKLIFT, LPG PRPOPANE 3300 LB CAP., DUAL PALLET FORKS, CUSHION TIRES, 6187 HRS.,
Toyota 5FGC30 5300LB Cap 3-Stage LPG Forklift
Toyota 5FGU30 6000LB Cap 3-Stage LPG Forklift
Toyota 7FGU30 6000LB Cap 3-Stage LPG Forklift
Sebright Model 7460-PC Compactor With Extra Bin
Fox Mfg Model 60 Bailer
Global 36DT Trash and Cardboard Compactor
Coats 6401 Direct Drive Truck Balancer Machine
Coats Rim Clamp 5060EX Tire Machine
Coats HIT5000 Tire Machine
Coats HIT5000 Tire Machine
Sullair 16B60H 60 Hp Air Compressor
Zeks Heat Sink 1000HSFA400 Air Dryer
Quincy QSI-1000 Air Compressor
Orion H669 Pallet Wrapping Machine
Grieve TB500 Electric 500 Degree Oven
DoAll TF1421 Heavy Duty Band Saw
Haberle H350 Metal Cutting Circular Saw
MK Enterprise EM2 Machine Lathe
PALLMAN TS8-9 GRINDER/ CRUSHER; 32"; 100 HP
Charmilles robo fil 2020 wire edm
Charmilles robo fil 510 wire edm
Parker Majestic model 2Z surface grinder w/ Walker 6x12 permanent magnetic chuck, Sony 2 axis DRO
DURO DYNE MODEL PLS POWERED LINER SIZER W/60" Capacity; Power Raise and Lower of Roller; Controls
PEXTO 52" MODEL 152-K 16 GAUGE POWER SHEET METAL SHEAR:
LION MODEL 1836 CLEAT FOLDER
TENNSMITH 48" MODEL V4812 12 GAUGE CAPACITY FINGER BRAKE
FECO ROTO-DIE 10' MODEL 10 HYDRAULIC BENDER
WYSONG 62" MODEL B-16 BENDING ROLL W/14-16 Ga. Capacity; Drop End; 1 1/2 HP AC Motor & Control
NIAGRA 10' 10 GAUGE MODEL NO. HL-10 CAPACITYPOWER SHEAR
LOCKFORMER 5' X 20' (APPROX.) CAPACITY, MODELVULCAN 1000 B SINGLE HEAD CNC PLASMA CUTTER W/Hypertherm Powermax 1000 G3 Series Plasma Cutting System63" X 20'6" Tank; Free Standing CNC Control Panel
WHITE 4300 LB. CAPACITY MODEL MA45 LP FORK LIFT TRUCK: W/3-Stage Mast; Solid Tires
BILZ 1SG3000 THERMO GRIP UNIVERSAL TOOL SHRINK FIT TOOL HOLDER INSERTION UNIT - TOOL SETTER [USED FOR HSK100A TOOLHOLDERS]
PUCK MASTER MCT 225H HYDRAULIC CHIP COMPRESSION/SHREDDER RECYCLING SYSTEM, COMPLETE WITH NEW LONDON ENGINEERING STEEL TRAK UNDERGROUND ELEVATED CHIP CONVEYOR APPROX. 100' LONG, SHRED MASTER TOP LOADIN
MAKINO A88 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-34.4'', Y-31.5'', Z-23.2'', FULL 4TH AXIS, MX. WORKPIECE SWING: 39.4'', MAX HEIGHT: 51.2'', COMPLETE WITH PALLET CHANGERS, HSK100A SPINDLE TAPER,
MAKINO A88 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-34.4'', Y-31.5'', Z-38.2'', FULL 4TH AXIS, MX. WORKPIECE SWING: 39.4'', MAX HEIGHT: 51.2'', COMPLETE WITH PALLET CHANGERS, HSK100A SPINDLE TAPER
MAKINO A88 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-34.4'', Y-31.5'', Z-38.2'', FUL 4TH AXIS, MX. WORKPIECE SWING: 39.4'', MAX HEIGHT: 51.2'', COMPLETE WITH PALLET CHANGERS, HSK100A SPINDLE TAPER,
MAKINO A88 CNC HORIZONTAL MACHINING CENTER, TRAVES: X-34.4'', Y-31.5'', Z-38.2'', FULL 4TH AXIS, MAX. WORKPIECE SWING: 39.4'', MAX HEIGHT: 51.2'', COMPLETE WITH PALLET CHANGERS, HSK100A SPINDLE TAPER
MAKINO A77 MK2 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-31.496'', Y-29.527'', Z-30.315'', B-1'' (INDEX), MAX. WORK SWING: 35.826'', MAX. HEIGHT: 39.370'', COMPLETE WITH PALLET CHANGER, WITH [2] 25'
MAKINO A77 MK1 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-31.496'', Y-29.527'', Z-30.315'', MAX. WORK SWING: 35.826'', MAX HEIGHT: 39.370'', COMPLETE WITH FULL 4TH AXIS, PALLET CHANGER, WITH [2] 25''
SULLAIR LS-20 100 HP SKID PACKAGED ENCLOSED SCREW TYPE AIR COMPRESSOR, COMPLETE
QUINCY QSI-500 QS1500ACA31ED 100 HP SKID PACKAGED ENCLOSED SCREW TYPE AIR COMPRESSOR, COMPLETE WITH POWER SYNC CONTROLS
MAKINO A66/60 MK4 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-31.5'', Y-27.5'', Z-25.196'', 4TH AXIS PALLET ROTATION, MAX WORK SWING: 34.96'', MAX HEIGHT: 34.433'', PALLET CHANGER WITH [2] 19-1/2'' X
MAKINO A66/60 MK3 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-31.5'', Y-27.5'', Z-25.196'', 4TH AXIS PALLET ROTATION, MAX WORK SWING: 34.96'', MAX HEIGHT: 34.433'', COMPLETE WITH PALLET CHANGER WITH
MORI SEIKI SV-50/40 CNC MACHINING CENTER, TRAVELS: X-35.1'', Y-20.1'', Z-20.1'', COMPLETE WITH PALLET CHANGER, WITH [2] 19'' X 37'' PALLETS, CAT 40 TAPER SPINDLE, 10,000 RPM SPIDLE, 30-POSITION ATC, T
MORI SEIKI SH-50 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-24.8'', Y-23.6'', Z-25.6'', B AXIS-1 DEGREE, MAX. WORK SWING: 28.7'', MAX. HEIGHT: 27.5'', COMPLETE WITH PALLET CHANGER WITH [2] 19.7'' X
MORI SEIKI SH-50 CNC HORIZONTAL MACHINING CENTER, TRAVELS: X-24.8'', Y-23.6'', Z-25.6'', B AXIS-1 DEGREE, MAX. WORK SWING: 28.7'', MAX. HEIGHT: 27.5'', COMPLETE WITH PALLET CHANGER WITH [2] 19.7'' X
OKUMA LB-15II-MW CNC TURNING CENTER, COMPLETEWITH 12-STATION TURRET, LIVE TOOLING, 1-1/2'' SPINDLE BORE, 4500 RPM SPINDLE, WITH PENDANT PROGRAMMABLE CONTROLS, HENNIG MDL. KM01315-00 ELEVATED CHIP CONV
TIMESAVERS 1111-11-0 WET TYPE 9'' WIDE PASS THROUGH BELT SANDER,
PEMSERTER SERIES LT/4 PNEUMATIC PRESS, WITH FOOT PEDAL CONTROLS
PEMSERTER SERIES LT/4 PNEUMATIC PRESS, WITH FOOT PEDAL CONTROLS
Ingersoll Rand Model AirSource Plus 185 Trailer Mounted Air Compressor, New 2006, Diesel Engine, 270Hrs
Ingersoll Rand Model P375WCU Air Compressor,375 CFM, New 1998 3393 Hrs.
Ingersoll Rand Model P375WCU Air Compressor,375CFM, New 1998 2871 Hrs.
Ingersoll Rand XP375WIR Trailer Mounted Air Compresor, New 2005, Diesel Engine, 937 Hrs
Sullivan-Palatek D45006CA CAT Diesel TrailerMounted Air Compressor Max. Pressure 100 PSIG,3910 Hrs.
Miller Trailblazer 302 CC.CV/AC/DC Welder Generator, 10,000 Watts
Miller Trailblazer 302 CC.CV/AC/DC Welder Generator, 10,000 Watts
Miller "Big Blue 251D" CC.DC Welder/Generator
Miller "Big 40 Diesel" CC.DC Welder/Generato
TCM Model FCG25-3HL Forklift, 4,300 lb. Cap., Cushion Tire, LP, 3-Stage Mast, SideShift, 42 In. Forks, 440 Hrs.
JLG Model 1930ES Electric Scissor Lift, New 2008, 18 Ft.8 In. Max. Platform Ht.,500 lb. Cap, 77 Hrs.
JLG Model 1930ES Electric Scissor Lift, SN 0200142131, New 2006, 18 Ft.8 In. Max. Platform Ht.,500 lb. Cap, 142 Hrs.
2001 Genie Model GS-4390 Rough Terrain Scissor Lift 4WD, Solid Pneumatic Tires, 69 In.x152 In., Platform, 1,500 lb. Cap., Dual Fuel, LP orGas, 43 ft. Max Platform Ht., Extendable Platform
1999 Genie Model Z45/25 Rough Terrain Boom Lift4WD, Pneumatic Tire, 45 Ft. Max.Platform Ht., 24 Ft. Max. Horz. Reach, 500 Lb. Cap.,Dual Fuel, LP or Gas, 2,525 Hrs.
2003 JLG Model 450AJ Series II Rough TerrainBoom Lift 4WD, Pneu. Tires, 45 Ft. Max.Platform ht., 24 Ft. Max. Horz. Reach, 500 lb. Cap.,Dual Fuel, LP or Gas, 1,713 Hrs.
Fascut Model FS600 Rebar Cutter/Bender
Fascut Model FS600 Rebar Cutter/Bender
Panasonic AW-005A Complete weld cell with power source
TOYOTA 3000 LB LP FORK TRUCK M-42 6FGCU15 189" LIFT HEIGHT
TOYOTA 3000 LB LP FORK TRUCK M-426FGCU15 171" LIFT HEIGHT
1972 PACIFIC HYDRAULIC PRESS PRESS BRAKE , M-J110-10 TON, 10"/102" CAPACITY, HURCO AUTO BEND 7 BACK GAUGE & CONTROLS, 3/16"X9' BRAKE CAPACITY
1989 KOMATSU 200 TON C-FRAME PRESS M-CBW200-2 1989, 30-50 SPM, 9.84" STROKE, 4.72" ADJ, 94"X33"X6" BOLSTER, WINTRESS WPC 1000, CLUTCH BRAKE CONTROLS, WINTRESS PROGRAMMABLE CAM OUTPUTS, HONEYWELL PB CO
1963 NIAGARA 40 TON OBI PRESS M-E 4 1/2 4" ADJ SLIDE, 25"X42" BOLSTER, ECCENTRIC GEARED, OPEN BACK, HONEYWELL PB CONTROLS, LILGHT SAFETY CURTAIN, WINTRESS WPC 1000 CLUTCH BRAKE CONTROLS
1992 L&J OBI PUNCH PRESS M-45 2" STROKE, 3" ADJ SLIDE, 14.5" SHUT HEIGHT, 36"X24" BOLSTER, AIR CLUTCH, PB CONTROLS
LITTELL STRAIGHTNER & COIL CRADLE M-412-7PD-C40 CRADLE-4000 LB, 60" OD, WIDTH 12", STRAIGHTNER-.125 THICK 12" WIDE
1981 MINISTER 60 TON PRESS M-P2-60-36, BOLSTER LR-FB 36"X25", SPM-200, TON-60, LENGTH OF STROKE-3", W/ SERVO FEEDER SLIDE ADJ-3"
LITTELL STRAIGHNTER & COIL CRADLE M-312-7PDL-C40 CRADEL-4000 LB CAP, 60" OD, 12' WIDTH, STRAIGHNTER-THICKNESS .050X12", .070X2'
1983 MINISTER 60 TON PIECE MAKER PRESS M-P2-60 BOLSTER LR-FB 36"X25", SPM-0-280, 60 TON, KENGTH OF STROKE-3". SLIDE ADJ-3", W/VAMCO SERVO FEED, M-PCFS-14
ROWE CANDLE & CAR M-7520-DSJ, MAX WEIGHT 7500 LBS, MAX 20" WIDE, OD 60" OD, CAR, M-BG4-12, MAX WEIGHGT 12,000 LBS, MAX 20" WIDE, OD 60" OD
1975 NIAGARA 250 TON PRESS M- BP2-250-60-36, SPM- 0 - 60, STROKE NA, ADJ NA, BOLITER LA FB 60X36" W/ VAMEO SERVO FEED, M- CFS-30 II
1975 B&K SLITTER LINE M- BKS-20 MOTOR HP 15 DC, MOTOR RPM1750, SPINDLE GEAR RATIO 1:1, DRIVE REDUCTION RATIO 10:1, MAX WIDTH - 54", MAX CUTTER SPACE 50", MAX CUTTER DIA 11.78", MIN CUTTER DIA- 10.00",
1988 LVD PRESS BRAKE M-55BH06 MAX CAP PPCB 50/20 MNC, 7' BED
1988 LVD PRESS BRAKE M-55BH06MNC MAX CAP, PPCB 50/20 MNC, 7' BED
1989 CHICAGO D&K 50-75 TON PRESS BRAKE MODEL 46-C 6' BED, HURCO AUTO BEND 4, BACKGAGE W/ CONTOLS
1984 MONARCH CNC VERTICAL MILL M-VMC-150 32"X81" TABLE, X=74", 3500 RPM, #45ASA TAPER, NO ATC, GE 2000 CNC, CONTROLS
1970 CARLTON RADIAL ARM DRILL 4' ARM X 11" COLUMN, MODEL 1 AL CLAMPING & ELEVATION, 80-2000 RPM, 7.5 HP, 24"X30"X20" PLAIN, 20"X20"X12" TILTING
HAAS VF-3 CNC VERTICAL MACHINE CENTER (1995; W/Cat. 40 Taper; 20 ATC; Programmable Coolant Nozzle; 18" X 48" "T" Slot Table; 15-HP High Torque Spindle; Haas CNC
MARVEL MODEL 8/M8/M9/S TILTING HEAD VERTICAL BAND SAW W/26 To 272 FPM Blade Speed; 33" X 42" "T" Slot Working Table Area; Work Vise; Chip Pan; Extra Blades
Atlas Copco GA 11V SD FF Work Place air system, 7347 recorded hrs
Griggio SC3200 sliding table saw
Selco WNT600 single beam panel saw c/w self-feed, in-feed roller and Zebra labeller
A&H, AHFSTA12012H, 10HP, HI FLOW PISTON STYLEAIR COMPRESSOR
RAYMOND, 204DR40TT, 4000 LBS. 2-STAGE 4-DIRECTIONAL BATTERY POWERED SIDELOADER (FORKLIFT), 211" MAX. LIFT, 849 HOURS, CHARGER INCLUDED,
TOYOTA, 7FGU25, 5000 LBS, 3-STAGE LPG FORKLIFT WITH SIDE SHIFT, 189" MAX LIFT, 5183 HOURS
TOYOTA, 7FGU25, 5000 LBS, 3-STAGE LPG FORKLIFT WITH SIDE SHIFT, 189" MAX LIFT, 5600 (APPROX) HOURS
TOYOTA, 7FGU25, 5000 LBS, 3-STAGE LPG FORKLIFT WITH SIDE SHIFT, 189" MAX LIFT, 5683 HOURS
TOYOTA, 7FGU25, 5000 LBS, 3-STAGE LPG FORKLIFT WITH SIDE SHIFT, 189" MAX LIFT, 5602 HOURS
NISSAN, MCUGL02F36LV, 6700 LBS. 3-STAGE LPG FORKLIFT WITH SIDESHIFT, 191" MAX LIFT, 1959 HOURS
NISSAN, MCUL02A33LV, 5700 LBS. 3-STAGE LPG FORKLIFT WITH SIDESHIFT, 175" MAX LIFT, 1349 HOURS
HYSTER, S120XM, 12000 LBS, 3-STAGE LPG FORKLIFT WITH SIDESHIFT, 208" MAX LIFT, 6825 HOURS
1991, FOCUS, PF-80, PROGRAMMABLE AUTOMATIC BAR STOCK SAW, .25" TO 1.25" CAPACITY
2005 KASTO, KASTOTWIN A5, DUAL COLUMN TWIN BLADE AUTOMATIC HORIZONTAL BANDSAW, 440V
1980 AMADA, H-1080, SEMI-AUTOMATIC HORIZONTALBANDSAW, 550V
2001 HYDMECH, H18A, AUTOMATIC HORIZONTAL BANDSAW
1998 KASTO, SBA 400 AU, DUAL COLUMN AUTOMATICHORIZONTAL MITERING BANDSAW, 220V
1999 KASTO, KASTOTWIN A4, DUAL COLUMN AUTOMATIC HORIZONTAL BANDSAW, 440V
2005 BOMAR, INDIVIDUAL 510-330 GA, SEMI-AUTOMATIC HORIZONTAL BANDSAW, 400V
2003 HACO, TS3006, 16GA X 10' SHEAR WITH SQUARING ARM AND SP8 FRONT OPERATED POWER BACKGAUGE, 575V
Capco MODEL GCT Type II 2007 8'' x 12' long belt transfer count conveyor c/w Capco model GCT II incline belt conveyor c/w semi circular canning table
Scan Coin MODEL SC Active 2800-CA8 2002 highspeed count sorer, 0.55'' to 1.50'' diameter range, 0.04'' to 0.14'' thickness range, (1) gallon input hopper capacity, (9) programmable bag holders
De La Rue MODEL Mach 9CDE Coin counting & sorting machine, 0.61'' to 1.51'' coin size diameter, .04'' to 0.12'' coin size thickness, 5,000 coins inspection pan capacity, 4,500 coins per minute process
De La Rue MODEL Mach 9CDE Coin counting & sorting machine, 0.61'' to 1.51'' coin size diameter, .04'' to 0.12'' coin size thickness, 5,000 coins inspection pan capacity, 4,500 coins per minute proces
Laurel MODEL LAC-16HD 2004 Heavy duty coin wrappers, 15mm to 38mm acceptable coin diameter range, 1mm to 3.5mm acceptable coin thickness range, (40) rolls per minute wrapping speed, (3,000) coins per
Laurel MODEL LAC-16HD 2004 Heavy duty coin wrappers, 15mm to 38mm acceptable coin diameter range, 1mm to 3.5mm acceptable coin thickness range, (40) rolls per minute wrapping speed, (3,000) coins per
De La Rue MODEL 1840 2007 HD high speed coinwrapping machine, coin size range 0.60'' to 1.50'' diameter, 0.04'' to 0.14'' thickness, (20,000) coins input hopper capacity, 1,000 foot roll paper roll ca
De La Rue MODEL 1820006 2008 Coin wrapping machine, 0.60'' to 1.30'' coin size range, (5,000) coins input hopper capacity, 1,000 foot roll paper roll capacity, (1,500) coin per minute count speed, (6)
De La Rue MODEL 1820006 2008 Coin wrapping machine, 0.60'' to 1.30'' coin size range, (5,000) coins input hopper capacity, 1,000 foot roll paper roll capacity, (1,500) coin per minute count speed, (6)
Hobart H600/110 bowl mixer with 3 assorted bowls
Tekno Stamap SRL bowl mixer, model MESC.PLANETARIA LT60-W-AA, model no. V380/50/3
Polin Roto 8095 200SC stainless steel walk-inrotary oven, 1 trolley capacity, extraction to atmosphere
Refrigerator True TC-72 3dr stainless steel exterior copper color finish 1/2HP 115V 1Ph NSF approved
display case refrigerated chocolate merchandiser 60x24x48in with sliding door. Humidity and temp control. by Alternative Air and Store fixtures. Model AACCC-60-R sn 0021650 120V 10amps mfg date 1/25/0
melter Savage Bros Co model 0917-40 sn 09-3111 with lid. 1/8 HP 15 rated amps 12 RPM 115 rated voltage 1 Ph 60 Cycles 1500 heaters watts 115V date of manufacture 5/3/2007 with lid and agitator
melter Savage Bros Co model 0917-40 with lid. 1/8 HP 15 rated amps 12 RPM 115 rated voltage 1 Ph 60 Cycles 1500 heaters watts 115V date of manufacture 5/3/2007 with lid and agitator
candy cooker Savage Bros Co model 2410 with lid. 1/6 HP 14 rated amps 28 RPM 1 phase 60 cycles 230V 3000 heater watts date of manufacture 6/12/2007 with Baldor Electric Industrial motor and stand with
candy cooker Savage Bros Co model 2410 with lid. HP 1/6 HP 14 rated amps 28 RPM 1 phase 60 cycles 230V 3000 heater watts date of manufacture 5/5/2007 with Baldor Electric Co motor and stand with lid a
Mitsubishi Mdl.FGC25 5,000 Lb. Forklift 2 Stage Mast, Propane Driven, Cushion Tires, 40 Inch Forks
Mitsubishi Mdl.FGC25 5,000 Lb. Forklift 2 Stage Mast, Propane Driven, Cushion Tires, 40 Inch Forks
Century Mdl. 74H-16 Horizontal Hone (1995), 16' Head Stroke, Approx. 38 Inch Max Swing, 2 Work Holding Vices, 20 HP Tool Drive Motor, Operators Control Panel
Century Mdl. 74H-16 Horizontal Hone (1995), 16' Head Stroke, Approx. 38 Inch Max Swing, 2 Work Holding Vices, 20 HP Tool Drive Motor, Operators Control Panel
Clausing Kondia FV-1 CNC Vertical Mill, Prototrak MXT CNC Control, Hard Slide Ways, 9 Inch x 48Inch Table, Variable Speed , 60-400 RPM, Power Draw Bolt, 6" Machine Vice, Accurite DRO for Z Axis
Toolmex TUR560 22" x 126" Engine Latheing, 126" Centers, 27 Speeds, 18-1800 RPM, 3.5" Thru Hole, Thread Dial, Rapid All Directions, Hard ways, 4 Pos. Turret Post, (3) Steady Rests, 15.5" 4 Jaw Chuck,
(1997) Tos SUS 80 32" x 140" Engine Lathe140" Centers, 22 Speed, 7.1 - 900 RPM, 3" Thru Hole, Inch/Metric Threading, Thread 31.5" Swing, 140" Centers, 22 Speed, 7.1 - 900 RPM, 3" Thru Hole, Inch/Metri
Mazak 40N/ATC/MC Integrex CNC Lathe. Mazatrol T-3 CNC control, 80" Centers, 3 Jaw Chuck, 30 Position Automatic Tool Changer, Chip conveyor, Hydraulic Steady Res
(1978) Dainichi 36? x 204" Engine Lathe.Model DLG-SHB 63X500(Geared Head), 24" 4 Jaw, 16" Steady Rest
Leblond 3220-25 35? x 300? Engine Lathe. (Geared Head) , 24" 4 Jaw Chuck, 20" Steady Rest, 12" Steady Rest, 4 Way Tool Post, Tailstock
(1992) Tos SU125 53? x 300? Engine Lathe(Geared Head), 31" 4 Jaw Chuck, 24" Steady Rest, 20" Steady Rest, Trak Model 102 (2) Axis Digital Readout, Tool Post, 4 Way Rapid
(1997) Tos SUS 80 32" x 140" Engine Lathe. 31.5" Swing, 140" Centers, 22 Speed, 7.1 - 900 RPM, 3" Thru Hole, Inch/Metric Threading, Thread Dial, 33" Dia. 4-Jaw Chuck, 12" Dia. Cap. Roller Bearing Stea
Kirstew model K710 ASC strip and crimp machine.
Schleuinger MP8015 co-axial cable stripper.
Schleuinger MP257 co-axial cable stripper.
Juneheinrich EFG-DF20 2,000kg electric forklift truck, year of manufacture 2000.
Provatec 745 Stainless Steel -- FORMING MACHINE -- 3-Phase Power
Bilwinco BW214W Stainless Steel 14 MULTIHEAD WEIGHING MACHINE
1993 High Performance DIXIE UNION SL 490 MEAT SLICING MACHINE -- Fully Programmable
JLG Wheeled ELECTRIC ACCESS PLATFORM - Telescopic Boom Cherry Picker - Model N40 - TWO PERSON Capacity - SWL 230KG - Year 1996 - Operating Height 45ft
JLG 2646E Self-Propelled ELECTRIC SCISSOR LIFT - Extendable Access Platform - TWO PERSON Capacity - SWL 340 KG - Year 1997 - Approx Working Height 9.7M / 32ft
1982 Lowe Industries 66 Cubic Foot Ribbon Blender, Model CD66HD, Stainless Steel. Center bottom outlet. Driven by a 25hp motor with reducer.
APV Anhydro Spray Dryer, Stainless Steel. Approximately 124'' diameter x 72'' straight side x 132'' coned bottom. Gas heated, APV Model CB160
Kewanee Boiler Model H3S-100-KGO Firing RangeGas 1389-4185, Firing Range Oil 10.0-29.9 w/ Gas/Oil Burner Model KF2. 0-962-GO, 3-HP Blower
1998 Willemin CNC Vertical Milling Machine, Type (Model) W138 w/8-Position ATC and NUM DRO Controls. 4th Axis, Travels: X 31.5'', Y 8.3'', Z 6.3'', Spindle Taper ISO 25, Control Num 750 Spindles: Hori
1997 Willemin CNC Vertical Milling Machine, Type (Model) W138 w/8-Position ATC and NUM DRO Controls. 4th Axis, Travels: X 31.5'', Y 8.3'', Z 6.3'', Spindle Taper ISO 25, Control Num 750 Spindles: Hori
1997 Willemin CNC Vertical Milling Machine, Type (Model) W138 w/8-Position ATC and NUM DRO Controls. 4th Axis, Travels: X 31.5'', Y 8.3'', Z 6.3'', Spindle Taper ISO 25, Control Num 750 Spindles: Hori
1998 Willemin CNC Vertical Milling Machine, Type (Model) W138, w/8-Position ATC and NUM DRO Controls. 4th Axis, Travels: X 31.5'', Y 8.3'', Z 6.3'', Spindle Taper ISO 25, Control Num 750 Spindles: Hor
Lantech Pallet Wrapper Machine, M/N Q300, w/5' Dia. Turntable, 9' Mast, 1 PH w/Ramp
2007 Lantech Pallet Wrapper Machine, M/N Q300 w/5' Dia. Turntable, 9' Mast, 1 PH, w/Ramp
1994 Gardner Denver Rotary Screw Air Compressor, M/N EAPOMC 100 HP, 460V, 3 PH, 100 Psig, 59,566 Hours
1994 Gardner Denver Rotary Screw Air Compressor, M/N EAPOMC 100 HP, 460V, 3 PH, 100 Psig, 57,466 Hours
Lincoln Idealarc Tig300/300 AC/DC Portable Welder, M/N TIG300, Min AC 2/15, Max AC 75/375, Min DC 2/15, Max DC 110/375, w/Bernard M/N 25005S Cooling Attachment
ExCello Vertical Milling Machine, M/N Style 602 w/Trak II Dro, w/9" X 48" T-Slot Table w/Excello SCR Power Feed, w/(12) ass't expandable collets, Jacobs Chuck, ass't tooling, 2 HP, w/GE 9T2712 Transfo
DOALL 20" VERTICAL BAND SAW MODEL 2013-E
AMADA AUTOMATIC HORIZONTAL BAND SAW MODEL HFA-330
MORI SEIKI CNC VERTICAL MACHINING CENTER MODEL MV-65/60
MORI SEIKI CNC VERTICAL MACHINING CENTER MODEL MV-55/50
MORI SEIKI CNC TURNING CENTER MODEL SL-25-B
MORI SEIKI CNC TURNING CENTER MODEL SL-25-B5
MORI SEIKI CNC TURNING CENTER MODEL SL150S
OKAMOTO 12 X 24 GRIND-X HYDRAULIC AUTOMATIC SURFACE GRINDER MODEL ACC 12-24ST
TOYOTA 300MM X 1000MM CNC ANGLE HEAD CYLINDRICAL GRINDER TYPE GL4A-10011
TOYOTA 300MM X 1000MM CNC ANGLE HEAD CYLINDRICAL GRINDER TYPE GL4A-10011
AMERICAN EST 10-TON HORIZONTAL HYDRAULIC BROACH MODEL M-10-48
OKUMA & HOWA CNC TURNING CENTER MODEL ACT-3
OKUMA & HOWA CNC TURNING CENTER MODEL ACT-3
MIYANO CNC TURNING CENTER MODEL BND42TS
IEMCA BOSS 542 CNC MAGAZINE LOAD BAR FEED MODEL BOSS 542 CNC/37
MIYANO CNC TURING CENTER MODEL BNE34S3
IEMCA MAGAZINE LOAD BAR FEED, MODEL TALAUTO 65/38
MIYANO CNC TURNING CENTER MODEL BNE51S
OKUMA & HOWA CNC TURNING CENTER MODEL ACT-3
OKUMA & HOWA 2 SPINDLE CNC TURNING CENTER MODEL ACT2SP-2
MAZAK CNC VERITCAL MACHINING CENTER MODEL VTC250D
IKEGAI CNC TURNING CENTER MODEL TU26L
IKEGAI CNC TURNING CENTER MODEL TU26L
NATCO HOLE STEEL MULTI-SPINDLE DRILL MODEL E3B
OKUMA & HOWA VERTICAL TWIN SPINDLE CNC TURNING CENTER, MODEL 2SP-V55
OKUMA & HOWA CNC TURNING CENTER MODEL ACT 4
OKUMA & HOWA VERTICAL TWIN SPINDLE CNC TURNING CENTER MODEL 2SP-V55
MORI SEIKI CNC HORIZONTAL MACHINING CENTER MODEL SH-50
OKUMA & HOWA CNC HORIZONTAL MACHINING CENTERMODEL MILLAC 50H
OKUMA & HOWA CNC VERTICAL MACHINING CENTER MODEL MILLAC 511V
OKUMA & HOWA CNC HORIZONTAL MACHINING CENTERMODEL MILLAC 3VA
TOYOTA CNC HORIZONTAL MACHINING CENTER MODELFA550II
MORI SEIKI CNC HORIZONTAL MACHINING CENTER MODEL SH-50
MORI SEIKI CNC HORIZONTAL MACHINING CENTER MODEL SH-50,
EMPIRE DRY BLAST CABINET MODEL PF3648
SWECO 44" DIA VIBRATORY FINISHING MILL MODEL FMD-10HA W/ TANK
KEARNEY & TRECKER VERTICAL MILL MODEL 630 TF20 19 X 84 POWER FEED T-SLOT TABLE 15-1500 RPM
SUNNEN PRECISION HONE MODEL MBC 1805
ALLIANT VERTICAL MILL VARI SPEED HEAD 10 X 54T-SLOT TABLE POWER FEED DRO, MODEL 1054-3V
RIDGID 300 POWER PIPE THREADER
Aercology AT1500 down draft blow-off station(system 04)
Aercology down flow draft system (system 03)Aercology model AT1500 down draft blow-off station
Aercology AT1500 down draft Blow off station(System 1)
Haas VF6 SS Vertical machining center (Mfg.10/06) 64?X travel, 30? Y Travel, 32? Z travel. 2 -Tables 64?x28?, 12,000 RPM, 30HP, 40 Taper, 1,400 IPM rapid traverse rate, High speed tool changer, Throu
Haas VF4 SS Vertical machining center (Mfg.10/06) 50?X travel, 20? Y Travel, 26? Z travel. 2 -Tables 52?x18?, 12,000 RPM, 30HP, 40 Taper, 1,400 IPM rapid traverse rate, High speed tool changer, Throug
Matsuura RA-3F Vertical machining center 1991, 31.5? x travel, 17? Y travel, 19? Z travel, 2 pallets shuttle system, 4,500 RPM Spindle, 30 Automatic Tool Changer, 40 Taper, Yasna
Matsuura RA-3FDC, Twin spindle vertical machining Center. (1998) 31.5? x travel, 17? Y travel, 19?Z travel, 2 pallets shuttle system, 60 automatic tool changer, 8,000 rpm spindle, turbo chip conveyo
Matsuura RA-4GDC Twin Spindle vertical machining center (2001) 40? X travel, 21? Y travel, 20? Z travel, 2 pallet shuttle system,2 - 12,000 RPM spindles, 2-40 Automatic tool changers, 40 taper spindle
Matsuura RA-4GDC Twin Spindle vertical machining center, s/n 010014572 (2001) 40? X travel, 21? Y travel, 20? Z travel, 2 pallet shuttle system,2 - 12,000 RPM spindles, 2-40 Automatic tool changers,
Matsuura RA-4G vertical machining center (1999) 40? X travel, 21? Y travel, 20? Z travel, 2 pallet shuttle system, 8,000 RPM spindle, 40 Automatic tool changer, 40 taper spindle, turbo chip conveyor,
CNC VERTICAL MILLING CENTER, FADAL, MDL VMC4020, FADAL CNC88 CONTROLS, COOLANT SYSTEM, 21 TOOL CHANGER, 48"X20" TABLE, HYDRO SWEEPO CHIP REMOVER, MDL 912-1
EDM SINKER, LEBLOND MAKINO, EDNCD 32-A8 WITH MGB CONTROLS (SN 2190), OILMATIC AUTO OIL TEMP REGULATOR
JIG GRINDER, MOORE, MDL G18 DRO CONTROLLER ANILAM MINIWIZARD, 24"X11" TABLE
SURFACE GRINDER, PARKER MAJESTIC, MDL 2432D WITH WALKER MAGNETIC CHUCK (18"X6"), 52"X8" TABLE, DRO CONTROLLER SONY MAGNESCALE LH10; WITH DEMAGNATIZER
Seabright model 106602 2004 large trash compactor w/10" hopper
1999 Dayton model 4LM43 40KW stand by generator powered by a GM 6 cylinder 4.3 vorteck natural or propane gas engine 3 phase 208 volt
Hyster LP gas 700x12 tires approx. 5000 lb. fork lift 3 stage mast w/ side shift
Komatsu model 30 large tired 28.9x15 5000 lb.LP gas fork lift w/ 3 stage mast 8756 hours
Halla Model LF30 6000 lb. LP gas fork lift w/815-15-7.0 tires, 3 stage mast side shift 4767 hrs
Caterpillar 5,000 Lb. Model T500SH Lpg ForkliftTruck
Komatsu 7,000 Lb. Mdl FG35BCS-7H Lpg ForkliftTruck
Landa Platinum Series Model Vng 4-2000Pressure Washer
Harrison 16" X 60" Model M400 Engine Lathe
1998 Timemaster 37" X 200" Model M-3727 H.D. Gap Engine Lathe
Spx Model C Hydraulic Torque Wrench
ENGINE LATHE, DAEWOO 20" X 66", MDL. A20, 11"SW. OVER CROSSLIDE, 2-3/4" HOLE THROUGH SPDL., SPDS: 10-3000 RPM, THDNG., STEADYREST, TAPER ATTACH
ENGINE LATHE, LODGE & SHIPLEY 21" X 102", MDL. 2013, 13" SW. OVER CROSSLIDE, 2" HOLE THROUGH SPDL., SPDS: 21-1740 RPM, 10" DIA. 3-JAW CHUCK, (2) STEADYRESTS, TAPER ATTACH
ENGINE LATHE, AXELSON 32" X 78", MDL. 20, RAISED 6" IN THE SAND, 24" SW . OVER CROSSLIDE, 2.5" HOLE, SPDS: 9.5-1288 RPM, 18" DIA. 4-JAW CHUCK, THROUGH SPDL. THDNG
KEYSEATER, DAVIS MDL. 4, 2 HP MOTOR
ENGINE LATHE, MONARCH MDL. 10"EE PRECISION TYPE, 12-1/2" X 20" CENTERS, SPDS: 0-2500 RPM, 1-1/2" SPDL. HOLE, ESP-130 TRANSISTOR INVENTER, ACU-RITE 2-AXIS D.R.O., TAPER ATTACH
CNC VERTICAL MACHINING CENTER, TONGIL MDL. TNV-40A, FANUC SERIES O-M CNC CONTROL, 16" X 36" TABLE, 20" (EST.) X-AXIS TRAVEL, 20" (EST.) Y-AXIS TRAVEL, 40" (EST.) Z-AXIS TRAVEL, CAT-40 SPDL. TAPER, 16
CNC VERTICAL MACHINING CENTER, JOHNFORD MDL.VMC-1050, 2000, FANUC SERIES O-M CNC CONTROL, 20" X 48" TABLE, 41.3" X-AXIS TRAVEL, 19.7" Y-AXIS TRAVEL, 24" Z-AXIS TRAVEL, CAT-40 SPDL. TABLE, 24 POS. ATC
AUTOMATIC HORIZONTAL BANDSAW, HE&M 12.75" X 12.75", MDL. H90A-B/F, 1996, 3 HP MOTOR, SPDS: 65-350 SFPM, 0 TO 800 LB. CUTTING PRESSURE, FEED RATE: 0-3 IPS, CLAMPING PRESSURE: 0 TO 1700 LB., PWR. CLAMPI
GENERAL PNEUMATICS REFRIGERATED AIR DRYER MODEL TKF400A
ATLAS COPCO FD380 CSA/UL AIR DRYER
GARDNER DENVER 100 H.P. SKID MOUNTED ROTARY AIR COMPRESSOR MODEL EPP99D04
GARDNER DENVER 50 H.P. SKID MOUNTED ROTARY AIR COMPRESSOR MODEL ARGCC
ATLAS COPCO 245 H.P. ROTARY AIR COMPRESSOR TYPE GA180VSD RUN HRS 29694, MODULAR HRS 32549
NORDSON MODEL COLORMAX / 11250CM TRACK MOUNTED POWDER SPRAY BOOTH W/ 10 RECIPROCATING GUNS & COLLETS
MILLER CP302 CV DC WELDER W/ BERNARD ARM MILLER 22A 24V WIRE FEED & WIRE DISPENSER DRUM
PACIFIC 165-TON X 12' CNC PROGRAMMABLE HYDRAULIC PRESS BRAKE MODEL J165-12
CINCINNATI 350-TON X16' FORM MASTER II CNC PROGRAMMABLE HYDRAULIC PRESS BRAKE SERIES 350FM11
AMADA 50-TON CNC TURRET PUNCH MODEL COMA 506072NCT
TORIT DUST COLLECTOR 12 CARTRIDGE PULSE JET DOWN FLOW SELF CONTAINED MODEL DFT3-2A
MESSER CUTTING SYSTEMS 10' X 36' CNC PLASMA ARC/ACETYLENE SHAPE CUTTER MODEL TITAN
PACIFIC 150-TON PRESS FORMER HYDRAULIC GAP PRESS MODEL 150 PF
PACIFIC 150-TON PRESS FORMER HYDRAULIC GAP PRESS MODEL 150PF
KOMATSU 200-TON GAP RESS MODEL OBS200S-VS-3
WYSONG 10' X 3/8" CNC PROGRAMMABLE POWER SQUARING SHEAR MODEL 1038
SCOTCHMAN HYDRAULIC IRONWORKER MODEL 314C
AMADA 30-TON CNC TURRET PUNCH MODEL PEGA 305072NC
MITSUBISHI 5 X 10' 2000 WATT SHUTTLE TABLE LASER SHAPE CUTTER MODEL 3015 LXP
MAZAK SUPER TURBO X 510 MKII CNC LASER CUTTER60 X 120 4000 WATT
MAZAK SUPER TURBO X510 MKII CNC LASER CUTTER60 X 120 4000 WATT
MAZAK SUPER TURBO X510 MKII CNC LASER CUTTER60 X 120 4000 WATT
WYSONG 100-TON X 12' CNC PROGRAMMABLE HYDRAULIC PRESS BRAKE MODEL MTH100-144
WYSONG 35-TON X 6' CNC PROGRAMMABLE HYDRO MECHANICAL PRESS BRAKE MODEL H3572
PACIFIC 1,000-TON X 14' CNC PROGRAMMABLE FABRI-K HYDRAULIC PRESS BRAKE MODEL FK1000-14/8
LISSMAC 60" STEEL BRUSHING MACHINE MODEL SBM-B 1500
SNOW MODEL 150AC WATER CHILLER
SNOW 50KVA PNEUMATIC PRESS TYPE PROJECTION WELDER TYPE ENV-12-30
LINCOLN POWER WAVE 455 W/ ZIPLINE ARM, POWERFEED WIRE FEED & WIRE DISPENSING DRUM
LINCOLN POWER WAVE 455 MIG WELDER W/ ZIP LINEARM POWER FEED WIRE FEED & 2 WIRE DISPENSING DRUMS
MILLER CP302 CV-DC WELDER W/ MILLER 24A 24V WIRE FEED
MILLER CP302 CV-DC WELDER W/ MILLER 24A 24V WIRE FEED
MILLER CP302 CV-DC WELDER W/ MILLER 24A 24V WIRE FEED
MILLER CP302 CV-DC WELDER W/ BERNARD ARM W/ COLUMN & MILLER 22A 24V WIRE FEED
MILLER INVISION 456MP DC INVERTER ARC WELDERW/ MILLER 70 SERIES 24V WIRE FEED W/ CART
MILLER INVISION 456MP DC INVERTER ARC WELDERW/ MILLER 70 SERIES 24V WIRE FEED W/ CART
MILLER INVISION 456MP DC INVERTER ARC WELDERW/ MILLER 70 SERIES 24V WIRE FEED W/ CART
MILLER INVISION 456MP DC INVERTER ARC WELDERW/ MILLER 70 SERIES 24V WIRE FEED W/ CART
MILLER INVISION 456MP DC INVERTER ARC WELDERW/ MILLER 70 SERIES 24V WIRE FEED W/ CART
LINCOLN CV400 MIG WELDER W/ LINCOLN LN-10 WIRE FEED
LINCOLN CV400 MIG WELDER W/ LINCOLN LN-10 WIRE FEED
LINCOLN CV400 MIG WELDER W/ LINCOLN LN-10 WIRE FEED
LINCOLN CV400 MIG WELDER W/ LINCOLN LN-10 WIRE FEED
Hobart Model D-300T Dough Mixer, with SS bowl and flat beater, 2 speed, manual lift, on castors, 1/60/220 volts
Avery Pressure Sensitive Labeler, Model ALS1.101. 3 sided labeler with holddown belt, hot stamp
Gifford Wood Vertical Colloid Mill, Model VT71.
Consolidated Capem 6 Head Rotary Capper, Model D-6-F.
Mazak HTC400 CNC twin pallet horizontal machining center Mazatol M Plus control, 400 x 400mm pallet size, 24 station auto tool changer
Yamazaki Mazak CNC slant bed turning centre,type QTN-10 eight station rotary turret, swarf conveyor
Yamazaki Mazak CNC slant bed turning centre,type QTN- 10 eight station rotary turret, swarf conveyor
Okuma CNC slant bed turning centre, type LCS-15 Okuma OSP7000L control system, eight station turret, stealth helstock, swarf conveyor, fitted robotic work piece on/off locking system
KITO 5 TON OVERHEAD ELECTRIC CHAIN HOIST C/WREMOTE
KITO 1 TON OVERHEAD ELECTRIC CHAIN HOIST C/WREMOTE
ESAB LAE 800 sub arc welder, unbadged electrode feed unit with bespoke spiral manipulator & positioning bed.
Toyota Model 5FGC25, 4700 Lbs. LP GasFork Lift Truck
Kaeser Model AS 31, Fully Enclosed PackagedAir Compressor,
Kalamazoo Model H9AW, 9 Inch x 18 InchCapacity Horizontal Metal Cutting Band Saw
Roll-In Journeyman Model 6JM, 20 InchCapacity Vertical Contour Metal Cutting Band Saw
Bridgeport Series I, 2-HP Vertical MillingMachine
Bridgeport Series I, 2-HP Vertical MillingMachine
Bridgeport Series I, 2-HP Vertical MillingMachine
KBC Model TUM-1VS, 3-HP Vertical MillingMachine
KBC Model TUM-1VS, 3-HP Vertical MillingMachine
LOMA MEALDETECTOR/CHECKWEIGHER 7000 SERIES 12"X 2" INCH APERTURE
McDowell Case Erector Model 201
Reimelt Vacuum receiver Model 8450287
Reimelt Vacuum receiver Model 8450287
Ram Equipment LLC Case Packer Model AB-PLC
Euromac Chain Forming Machine with Dies Model54/STV
Cryo-Chem Inc. Kryospray liquid nitrogen Freeze Tunnel, 53 feet long. Model 4150-48
Kaps-All Bottle Unscrambler Model AU-5
Lincoln
Omega Bottle Unscrambler Model 4DRP215
Pacific Filler Model 37-0012
Capem Capper Model TG1015
MTC Tote Dumper Model LEC
Weiler Grinder Model 17806H
Weiler Grinder Model 17806HB
Weiler Grinder Model 1612350 with Conveyors
DAEWOO 4000 LB FORK TRUCK LP, 127" LIFT HEIGHT, SIDE SHIFT, G2424 ENGINE, M-G20-E
2004 YALE 6000LB ELECTRIC FORKTRUCK SIDE SHIFT, E-CUSHION TIRES, 211" LIFT HEIGHT
CLARK WIRE CAGE M-C-500-120, 12,000 lb, 2 - STAGE, WIDE MAST, DUAL FRONT HARD TIRES, PROPANE, R.O.P.S,
1997 MONTGOMERY POWER BENDING ROLL M-M-721OH, 7 ? HP, 10 GAUGE x 6' CAPACITY, 6" ROLL DIAMETER, 3 ROLL PYRAMID, TYPE
1978 HTC HYDRAULIC SHEARING MACHINE M-250-10A, 250 TON, 1/4" x 10' CAPACITY, FRONT OPERATED POWER BACK GAGE, 10' FRONT SUPPORT ARM
PIRANHA HYDRAULIC IRONWORKER M-P-70, 70 TON W/ANGLE IRON, SHEARING & NOTCHING ATTACHMENTS, 12" BENDING DIE, (2) PUNCH & DIE SETS, (COMPLETE)
HEM AUTOMATIC VERTICAL BAND SAWM-D100M, 2 HP, 21" THROAT SIZE, COOLANT SYSTEM, 10' ROLLER CONVEYOR
LANTECH Pallet Wrapper, Table Diameter65", Roller Control Model# QX300
LANTECH Pallet Wrapper, Table Diameter60" Model# Q SERIES
JLG Articulating Aerial Lift, Reach45', Capacity 500 Lbs Model# 45HA
HYSTER 4750 lb Fork Lift Model# E60BS
CATERPILLAR 8,000 Lb Fork Lift,Electric, Side Shift, Max Lift 156", Forks 48" Model# M80
AUTO LIFT 30,000 Lb. Fork Lift, LPG,Side Shift, Max Lift 127", Forks 60" Model# L5-300-30
HARRISON Engine Lathe, Swing 10",Centers 30", Hole through Spindle 1.375", 3-Jaw Chuck Model# M250
DOALL Vertical Band Saw, Throat 16",Table 24" x 30", Welder Model# 16-3
STANDARD MODERN Engine Lathe, Swing19", Centers 60", Hole through Spindle 3", RPM 115-1600; Tail Stock, Cross Slide, 10" 3-Jaw Chuck Model# 1960
CHEVALIER Vertical Mill, Table 10" x50", Quill Travel 5" Model# FM3FKH
BRIDGEPORT Vertical Mill Table 9" x42", Acu-Rite 2-Axis DRO, Power Feed Table, Quill Travel 5" Model# SERIES I
BRIDGEPORT Vertical Mill Table 9" x42", Acu-Rite 2-Axis DRO, Power Feed Table, Quill Travel 5" Model# SERIES I
NIAGARA Power Squaring Shear, Capacity54" x 16 Gauge, Rear Operated Manual Back Gauge 18" Model# 160GD
CHEVALIER Automatic Surface Grinder,Chuck 12" x 24"Model# FSG-1224AD
BRIDGEPORT Vertical Mill Table 9" x42", Acu-Rite 2-Axis DRO, Power Feed Table, Quill Travel 5" Model# SERIES I
1995 NATIONAL Finger Brake, Capacity72" x 12 Gauge Model# U6 7212
1996 New London Chip Conveyor Model#T3,21/2,722
2008 New London Chip Conveyor 24" x20ft Model# 722-T3-HSB
2004 New London Chip Conveyor 24" x20ft Model# 722-T3-HSB
2004 New London Chip Conveyor 24" x20ft Model# 722-T3-HSB
2004 New London Chip Conveyor 24" x24ft Model# 722-T3-HSB
AJAX 100 KW ELECTRIC FURNACES, ThreeZone Model# TD-2133
EMPIRE Blast Cabinet, Chamber 36" x48", S/N 8595; Empire Dust Collector Mdl DCCM-80-A Model# PF-3648
MCKEE Tube End Sizer,Capacity 2.75" OD, A-B Panelview 550 Model# FM-70 DIGI II
EAGLE Tube Spinner, 40 HP HydraulicUnit, Quartech Datamate 8330 Control Model# SVCS
EAGLE Muffler Shell Maker & Lock Seamer; 15 HP & (2) 10 HP Hydraulic Units Model# LXS-FLO
MANCHESTER Tube End Former,Programmable Three Position Rotary Tool Holder, Tube OD 3" Capacity, 20 HP Hydraulic Unit Model# M.82-H-3
EAGLE Tube End Former, Capacity 2 3/4"OD, 10 HP Hydraulic Unit Model# C
EAGLE Tube End Sizer, Capacity 2.75"OD, 10 HP Hydraulic Unit, Rebuilt by Aristo Model# I/O
EAGLE Tube End Sizer, Capacity 2.75"OD, 10 HP Hydraulic Unit, Rebuilt by Aristo Model# I/O
EAGLE Tube End Sizer, Capacity 2.75"OD, 10 HP Hydraulic Unit, Rebuilt by Aristo Model# I/O
EAGLE Tube End Sizer, Capacity 2.75"OD, 10 HP Hydraulic Unit, Rebuilt by Aristo Model# I/O
SWECO/ROTO FINISH Vibratory Finisher,Bowl Diameter 68", 10 HP Model# FM-24LR
RPT-ROBOTIC PRODUCTION TECHNOLOGY (2)ABB Model IRB 1400 M98 Robots A-B Panelview 550 Control, (2) Nozzle Reamers; Dual Sided Rotary Turntable - 37" x 108", (2) Miller Auto Invision Welders Model# AUT
ROUCHE Welding Cell, (2) Miller XMT304 CC/CV DC Inverter Arc Welders w/60M Wire Feed, Autolink Option, A-B Panelview 600
TELESIS Marking System Model# TMP3100
2004 Rifast Feed unit Machine Model# ZEEPBM6x25
2003 Rifast Feed unit Machine Model# ZE/EPM/6
ROWE Straightener, Capacity 30" x.020" - .105", 7-Straightening Rolls, Entry & Exit Pinch Rolls, Model# C-30
Minster Servo Feed Rolls 4" dia. X 26"Model# MEF4-26S
ACROTECH Roll Bending Machine,Capacity 18 Gauge, Width 24", Upper Roll Diameter 3.5", Lower Roll Diameter 6", 1 HP Model# 1824
2003 Machine Concepts Straightener Rolldiameter 1.5", Fac 26", 15 rolls, Main drive motor 10hp, Max Gauge .100" @ max width Model# H2-1.75-24.0
MAGNUM 60 Ton Gap Frame HydraulicPress, Stroke 12", Daylight 20", Bed 25" x 28", Light Curtains Model# HFM-60B
1999 NEFF 18.9 Ton Hydraulic Press,Stroke 10" Max, Bed 20" x 23", Platen 10" x 28.5", Daylight Max 20", ATC Shuttle Feed Cell, Allen Bradley Panelview 550
WILLIAMS & WHITE Straight SideDownacting Hydraulic Press, Bed 60" x 96", Bolster Plate 7.5" Model# SH-750-96-60
WILLIAMS & WHITE Straight SideDownacting Hydraulic Press, Bed 60" x 96", Bolster Plate 10", A-B Control Model# SH-1000-96-60
FEDERAL 60 Ton Adjustable Bed Gap FramePress, Stroke 6", Strokes per Minute 90, Bed 21" x 32", Die Space 7.5" - 18.5" & 15" - 26", Adjustment 2.5", Wintriss WPC Control
NIAGARA 60 Ton OBI Press, Stroke 4",Strokes per Minute 45, Bed 21" x 32", Shut Height 19.25", Adjustment 3", Auto Lube, Rapid Air 6" Feeder, Wintriss Smart Pac/Console Control Model# M-60
NIAGARA 60 Ton OBI Press, Stroke 4",Strokes per Minute 45, Bed 21" x 32", Shut Height 19.25", Adjustment 3", Auto Lube, Rapid Air 6" Feeder, Wintriss Smart Pac/Console Control Model# M-60
FEDERAL 60 Ton Adjustable Bed Gap FramePress, Stroke 8", Strokes per Minute 90, Bed 21" x 32", Shut Height 13" - 24", Adjustment 2.5" Model# 60AB
FEDERAL 60 Ton Adjustable Bed Gap FramePress, Stroke 6", Strokes per Minute 90, Bed 21" x 32", Die Space 7.5" - 18.5" & 15" - 26", Adjustment 2.5", Wintriss WPC Control
NIAGARA 75 Ton Adjustable Bed Gap FramePress, Stroke 8", Strokes per Minute 65, Bed 24" x 36", Shut Height 6" - 18", Adjustment 4", Link SS-501 Controls Model# ABE-75
NIAGARA 75 Ton Adjustable Bed Gap FramePress, Stroke 8", Strokes per Minute 65, Bed 24" x 36", Shut Height 6" - 18", Adjustment 4", Link SS-501 Controls Model# ABE-75
NIAGARA 75 Ton OBI Press, Stroke 4",Strokes per Minute 42, Bed 24" x 36", Flanged Ram 18" x 24", Shut Height 20.5", Slide Adjustment 3.375", Bolster Plate 3", Link Control Model# M-75
VERSON 105 Ton OBI Press, Stroke 8",Strokes per Minute 105, Bed 30" x 39", Shut Height 18", Adjustment 4", T-Slotted Bolster Model# 7.5
VERSON 105 Ton OBI Press, Stroke 8",Strokes per Minute 105, Bed 30" x 39", Shut Height 18", Adjustment 4", T-Slotted Bolster Model# 7.5
NIAGARA 110 Ton OBI Press, Stroke 6".Strokes per Minute 40, Bed 27" x 42", Slide 21" x 28", Shut Height 18.25", Adjustment 5", AC Vector Saftronics GP10 Drive Control Model# E-110
WARCO 150 Ton OBI Press, Stroke 8",Single Back Geared, Bed 33" x 50", Shut Height 31", Slide Adjustment 4.5", Bolster Plate 3.75", Link SS-501 Control Model# 150
MINSTER 32 Ton OBI Press, Stroke 3",Strokes per Minute 175, Bed 16" x 24", Shut Height 12", Slide Adjustment 2.25", Bolster Plate, Auto Lube, Honeywell WPC Control Model# 4
WARCO 200 Ton OBI Press, Stroke 12",Strokes per Minute 36, Bed 34" x 52", Shut Height 22", Adjustment 5", Bolster Plate 4" Thick Model# G-200-I
NIAGARA 220 Ton OBS Gap Frame Press,Stroke 10", Strokes per Minute 20-40 variable, Bed 34" x 58", Slide 28" x 36", Shut Height 31", Motorized Adjustment 6", Die Clamp System, Link SS-501 Control Model
NIAGARA 150 Ton Straight Side DoubleCrank Press, Stroke 6", Strokes per Minute 33, Bed 48" x 84", Shut Height 27", Motorized Adjustment 5", T-Slotted Bolster Plate 3.75" Model# PN-150-84-48
NIAGARA 150 Ton Straight Side DoubleCrank Press, Stroke 6", Strokes per Minute 33, Bed 48" x 84", Shut Height 27", Motorized Adjustment 5", T-Slotted Bolster Plate 3.75" Model# PN-150-84-48
NIAGARA 150 Ton Straight Side DoubleCrank Press, Stroke 6", Strokes per Minute 33, Bed 48" x 84", Shut Height 27", Motorized Adjustment 5", T-Slotted Bolster Plate 3.75" Model# PN-150-84-48
NIAGARA 150 Ton Straight Side DoubleCrank Press, Stroke 10", Strokes per Minute 28, Bed 48" x 84", Shut Height 24.5", Motorized Adjustment 9", T-slotted Bolster Plate 3.75" Model# SC2-150-84-48
NIAGARA 150 Ton Straight Side DoubleCrank Press, Stroke 10", Strokes per Minute 28, Bed 48" x 84", Shut Height 24.5", Motorized Adjustment 9", T-slotted Bolster Plate 3.75" Model# SC2-150-84-48
NIAGARA 150 Ton Straight Side DoubleCrank Press, Stroke 10", Strokes per Minute 28, Bed 48" x 84", Shut Height 24.5", Motorized Adjustment 9", T-slotted Bolster Plate 3.75" Model# SC2-150-84-48
NIAGARA 150 Ton Straight Side DoubleCrank Press, Stroke 10", Strokes per Minute 28, Bed 48" x 84", Shut Height 24.5", Motorized Adjustment 9", T-slotted Bolster Plate 3.75" Model# SC2-150-84-48
Niagara 260 Ton Straight Side DoubleCrank Press, Stroke 6", T-slotted Bolster Plate 3.5" Model# PN-260-84-48
Perfecto 6,000# Double End Reel, Width24", ID 17.5" - 22.5", OD 60", Hold Down Arms, Pneumatic Brake Model# RD6-24B
Federal 250 Ton Straight Side DoubleCrank Press, Stroke 6", Strokes per Minute 60-120 Variable, Bed 42" x 72", Die Height 14", T-slotted Bolster Plate 48" x 72" x 6" thick, Windows 20" Wide, Smart Pac
Coe 6,000# x 24" x Servo Feed Line,Double End Reel Model CPR-DE-PO-6024, Width 24", ID, OD 60", Hold Down Arm
Niagara 250 Ton Straight Side DoubleCrank Press, Stroke 16", Strokes per Minute 18, Bed 54" x 96", Shut Height 36", Motorized Adjustment 11", T-slotted Bolster Plate 4.75", Windows 23" Wide, Smart Pac
Niagara 250 Ton Straight Side DoubleCrank Press, Stroke 16", Strokes per Minute 18, Bed 54" x 96", Shut Height 36", Motorized Adjustment 11", T-slotted Bolster Plate 4.75", Windows 23" Wide, Smart Pac
Perfecto Straightener, Capacity 26" x.188" - .250", Hold Down, Peeler, Entry & Exit Pinch Rolls - Pneumatic Lift Model# 38-26-5
Federal 300 Ton press, 84" x 54" bedwith Coe feeder #CPRF-324 Model# S2-300-84-42
Federal 300 Ton press, 84" x 54" bedwith Coe feeder #CPRF-324 and Perfecto Model 38-26-5 Straightener, Capacity 26" x .188" - .250", Hold Down, Peeler, Entry & Exit Pinch Rolls - Pneumatic Lift Model#
Bliss 500 Ton Straight Side 4-PointPress, Stroke 18", Strokes per Minute 20, Bed 72" x 96", Shut Height 50", Motorized Adjustment 10", T-slotted Bolster Plate 9", Sytech Die Clamp System, Smart Pac Mo
Perfecto 20,000# x 36" Servo Feed Line,Perfecto Reel Model RS-20-36B, ID 19.5" - 24.5", Hydraulic Expansion; OD 60", Coil Car
Niagara 500 Ton Straight Side DoubleCrank Press, Stroke 14", Strokes per Minute 20-45, Bed 60" x 144", Shut Height 36", Motorized Adjustment 12", Bolster Plate 6.5" & 5" Thick, Windows 39" Wide, Link
Coe 20,000# x 30" Wide Servo Feed Line,Reel Model CPR-PO-20030, ID 19" - 24", Hydraulic Expansion, OD 60", Traveling Coil Car
Niagara 500 Ton Straight Side DoubleCrank Press, Stroke 14", Strokes per Minute 20-45, Bed 60" x 144", Shut Height 36", Motorized Adjustment 12", Bolster Plate 6.5" & 5" Thick, Windows 39" Wide, Link
Perfecto 20,000# x 42" Wide x .078"Servo Feed Line, Reel Model RS20-42, ID 19.5" - 24.5", Hydraulic Expansion, OD 60", Hydraulic Expansion, Adjustable Base, Traveling Coil Car
Niagara 500 Ton Straight Side DoubleCrank Press, Stroke 14", Strokes per Minute 20-45, Bed 60" x 144", Shut Height 36", Motorized Adjustment 12", Bolster Plate 6.5" & 5" Thick, Windows 39" Wide, Link
NIAGARA 600 Ton Straight Side DoubleCrank Press, Stroke 12", Strokes per Minute 20-60 Variable, Bed 42" x 84", Shut Height 36", Motorized Adjustment 16", T-slotted Bolster Plate 54" x 84" x 7", Window
NIAGARA 600 Ton Straight Side DoubleCrank Press, Stroke 12", Strokes per Minute 20-60 Variable, Bed 42" x 84", Shut Height 36", Motorized Adjustment 16", T-slotted Bolster Plate 54" x 84" x 7", Window
Coe 20,000# Reel, Width 60", ID 19" -25", Hydraulic Expansion, OD 60", Hold Down Arm, Pneumatic Brake, Traveling Coil Car Model CPTCC-20060, Rotating Coil Head Model# CPR-20060
Verson 600 Ton Straight Side 4-PointPress, Stroke 14", Strokes per Minute 16 & 24, Bed 60" x 144", Shut Height 34", Motorized Adjustment 12", T-slotted Bolster Plate 9.5", Windows 60" Wide, Light Cur
1997 Clearing Niagara 1000 Ton StraightSide Link Drive Two-Point Press, Stroke 24", Strokes per Minute 15-30 Variable, Full Tonnage at .5" Above Bottom Stroke, Bed 72" x 180", Shut Height 54", Motoriz
Unist Programmable lubrication stationwith controller and (2) 2.5 gallon tanks Model# SPR-2000 Sproller
Unist Programmable lubrication stationwith controller and (2) 2.5 gallon tanks Model# SPR-2000 Sproller
Unist Programmable lubrication stationwith controller and (2) 2.5 gallon tanks Model# SPR-2000 Sproller
Unist Programmable lubrication stationwith large mounted tank Model# SPR-2000 Sproller
Unist Programmable lubrication stationwith large mounted tank Model# SPR-2000 Sproller
Unist Programmable lubrication stationwith large mounted tank Model# SPR-2000 Sproller
Unist Programmable lubrication stationwith large mounted tank Model# SPR-2000 Sproller
OPG INC. TOP BENCH CONTOUR PROJECTOR, 15'' WITH PROJECTRON IV DIGITAL READOUT
HAAS 4TH AXIS 5C COLLET INDEXER
KIRA MODEL VTC30 ELITE CNC VERTICAL DRILLINGAND TAPPING MACHINE WITH FANUC SERIES 21-M CNC CONTROLS, 30 TAPER SPINDLE, 10-STATION TOOL CHANGER, 12-1/2 X 19-1/2 TABLE
HAAS MODEL 5C 5TH AXIS INDEXER WITH SERVO CONTROLLER
OKUMA MODEL MC-3VA CNC VERTICAL MACHINING CENTER WITH 16-POSITION TOOL CHANGER, 40 TAPER SPINDLE, 6000 RPM, 13'' X 30'' TABLE, OKUMA SOP-500M-G CNC CONTROLS
OKUMA MODEL CADET V CNC VERTICAL MACHINING CENTER WITH 20-POSITION TOOL CHANGER, 40 TAPER SPINDLE, 20'' X 47'' TABLE, OKUMA OSP5020 CNC CONTROLS
HAAS 4TH AXIS 5C COLLET INDEXER
OKUMA MODEL MX45VA CNC VERTICAL MACHINING CENTER WITH 20-POSITION TOOL CHANGER, 40 TAPER SPINDLE, 7000 RPM, 18'' X 29.92'' T-SLOTTED TABLE, OKUMA OSP700M CNC CONTROLS
MIKRON MODEL 102-03 BEVEL FACE GEAR MACHINE
VERTICAL MILL, CINCINNATI MDL. 6, 20" X 104-1/2" TABLE, 60" LONGITUDINAL TABLE TRAVEL, SPDS: 14-1400 RPM, 50 HP MOTOR
HORIZONTAL HONE, SUNNEN MDL. MBB-1650, STANDARD SPECS, (10) SPDL. SPDS: 200-1600 RPM, MANUAL STROKE, LARGE SELECTION OF SUNNEN TOOLING INCLUDING HOLDERS, MANDRELS & STONES IN SUNNEN STORAGE CABINET
RAM TYPE RADIAL DRILL, WELLS INDEX MDL. IRD125, WELLS INDEX 2 HP VARIABLE SPD. HEAD, SPDS: 40-4200 RPM, #2 MT SPDL., 6" SPDL. TRAVEL, 11-1/2" THROAT DEPTH, ELEVATING COLUMN, 15-1/2" X 45" TABLE
HORIZONTAL MILL, KEARNEY & TRECKER MDL.205-S12, 12" X 62-1/2" TABLE, 34" LONGITUDINAL TABLE TRAVEL, SPDS: 20-1600 RPM, 5 HP HORIZ. SPDL. MOTOR, #50 TAPER HORIZ. SPDL., INDEPENDENT MOTORIZED OVERARM UN
ENGINE LATHE, MONARCH 10" X 20", MDL. 10"EE, STANDARD SPECS., TAPER ATTACH
TOOLROOM ENGINE LATHE, MONARCH 13" X 20", MDL. 10"EE, 7-1/2" SW. OVER CROSSLIDE, 1-7/16" HOLE, SPDS: 8-4000 RPM, 5 HP MOTOR, INCH THDNG., HARD BEDWAYS, TAPER ATTACH., HAND COLLET CLOSER
VERTICAL TURRET MILL, WELLS INDEX MDL. 747, 9" X 48" TABLE, 32" LONGITUDINAL TABLE TRAVEL, WELLS INDEX 2 HP VARIABLE SPDL. HEAD, SPDS: 50-4200 RPM, SERVO LONGITUDINAL, CROSS & VERT. KNEE FEEDS, ACU-RI
VERTICAL TURRET MILL, WELLS INDEX MDL. 747, 9" X 48" TABLE, 32" LONGITUDINAL TABLE TRAVEL, WELLS INDEX 2 HP VARIABLE SPDL. HEAD, SPDS: 50-4200 RPM, SERVO LONGITUDINAL, CROSS & VERT. KNEE FEEDS, ACU-RI
VERTICAL TURRET MILL, WELLS INDEX MDL. 747, 9" X 48" TABLE, 32" LONGITUDINAL TABLE TRAVEL, WELLS INDEX 2 HP VARIABLE SPDL. HEAD, SPDS: 50-4200 RPM, SERVO LONGITUDINAL, CROSS & VERT. KNEE FEEDS, ACU-RI
CNC TURNING CENTER, HAAS MDL. SL20T CNC LATHE, NEW 2001, HAAS CNC CONTROL, 20" SW. OVER BED, 10" SW. OVER TURRET SLIDE, 26" CENTERS, 2" HOLE, SPDS. TO 7,000 RPM, 20 HP VECTOR DRIVE SPDL., 10 TOOL POS.
CNC TURNING CENTER, HAAS MDL. SL20T CNC LATHE, NEW 2001, HAAS CNC CONTROL, 20" SW. OVER BED, 10" SW. OVER TURRET SLIDE, 26" CENTERS, 2" HOLE, SPDS. TO 7,000 RPM, 20 HP VECTOR DRIVE SPDL., 10 TOOL POS.
CNC VERTICAL MACHINING CENTER, HAAS MDL. VF4,NEW 1998, HAAS CNC CONTROL, 18" X 52" TABLE, 50" X-AXIS LONGITUDINAL TABLE TRAVEL, 20" Y-AXIS SADDLE TRAVEL, 25" Z-AXIS VERT. HEAD TRAVEL, SPDS. TO 7,500 R
CNC VERTICAL MACHINING CENTER, HAAS MDL. VF4B, NEW 11/2004, HAAS CNC CONTROL W/VOP-C OPTIONS, 18" X 52" TABLE, 50" X-AXIS LONGITUDINAL TABLE TRAVEL, 20" Y-AXIS SADDLE CROSS TRAVEL, 25" Z-AXIS VERT. HE
AIR LIFT ROTARY TABLE, GIDDINGS & LEWIS 48" X48" "AIR-LIFT", 9-1/2" HT. T-SLOTTED SURFACE, PNEU. LIFTING & CLAMPING CONTROLS, OUTBOARD SUPPT. RING W/HARDENED STEEL ROLLERS FOR OFF-CENTER LOADING, 90 D
PLAIN HORIZONTAL MILL, CINCINNATI MDL. 5 PLAIN, WIDE KNEE, 20" X 94-1/2" TABLE, 52" X-AXIS LONGITUDINAL TABLE TRAVEL, SPDS: 14-1400 RPM, 50 HP MOTOR, REAR CONTROLS, INDEPENDENT MOTORIZED OVERARM, DBL.
HORIZONTAL JIGMIL, DEVLIEG 2-1/2", MDL. 2B-36, DIATROL II X & Y-AXIS POSITIONING SYSTEM, 2-1/2" DIA. SPDL., #40 SPDL. TAPER, PWR. DRAWBAR, 24" X 36" TABLE, 36" X-AXIS LONGITUDINAL TABLE TRAVEL, 36" Y-
HORIZONTAL JIGMIL, HERBERT DEVLIEG MDL. 43H-48, 4" DIA. SPDL., #50 SPDL. TAPER, PWR. DRAWBAR, 35" X 48" TABLE, 48" TABLE CROSS TRAVEL, 42" Y-AXIS VERT. HEADSTOCK TRAVEL, 20" Z-AXIS SPDL. TRAVEL, 16" W
HORIZONTAL JIGMIL, DEVLIEG MDL. 4B-72, 4" DIA. SPDL., #50 SPDL. TAPER, PWR. DRAWBAR, 36" X 72" TABLE, 72" X-AXIS TABLE LONGITUDINAL TRAVEL, 48" Y-AXIS VERT. HEADSTOCK TRAVEL, 20" Z-AXIS SPDL. TRAVEL,
CNC HORIZONTAL JIGMIL, HERBERT DEVLIEG MDL. 3H-48, MACHINE REBUILT & RETROFITTED BY NEW DIMENSION IN 2004, VEGA MLM SERIES CNC CONTROL, 3" DIA. SPDL., #40 SPDL. TAPER, PWR. DRAWBAR, 35" X 48" TABLE, 4
CNC HORIZONTAL JIGMIL, DEVLIEG MDL. 4K-60 SPIRAMATIC, ALLEN-BRADLEY 9/SERIES CNC CONTROL, 4" DIA. SPDL., #50 SPDL. TAPER W/PWR. DRAWBAR, 40" X 60" TABLE, 60" X-AXIS LONGITUDINAL TABLE TRAVEL, 60" Y-AX
CNC HORIZONTAL JIGMIL MACHINING CENTER, DEVLIEG MDL. JMC4340, ALLEN-BRADLEY MDL. 7320 5-AXIS CNC CONTROL, 4" DIA. SPDL., #50 SPDL. TAPER, (2) 30" SQ. 4TH AXIS SHUTTLE PALLET ROTARY TABLES W/360 INDEX
ENGINE LATHE, MONARCH 17 INCH X 65 INCH9 INCH SW. OVER CROSSLIDE, 1 7/8 INCH HOLE, SPDS: 25-2000 RPM, 10 HP MOTOR, INCH THDNG.,HARD WAYS, TAPER ATTACH., COOLANT
ENGINE LATHE, CAZENEUVE 20-3/4" X 57", MDL. HB575, 11-1/2" SW. OVER CROSSLIDE, 1-5/8" HOLE THROUGH SPDL., SPDS: 25-2000 RPM, 12 HP MOTOR, INCH/METRIC THDNG., INCH THDNG: 3/8-224 TPI, HARD BEDWAYS, TAP
ENGINE LATHE, CAZENEUVE 20-3/4" X 57", MDL. HB575, 11-1/2" SW. OVER CROSSLIDE, 1-5/8" HOLE THROUGH SPDL., SPDS: 25-2000 RPM, 12 HP MOTOR, INCH/METRIC THDNG., INCH THDNG: 3/8-224 TPI, HARD BEDWAYS, TA
ENGINE LATHE, MONARCH 17" X 55", TYPE 610X54,MDL. 612, 10-1/2" SW. OVER CROSSLIDE, 2-1/8" HOLE THROUGH SPDL., HYD. SHIFTED PRE-SELECT TYPE HEADSTOCK, SPDS: 12-1500 RPM, 15 HP MOTOR, INCH THDNG: 2-120
ENGINE LATHE, CLAUSING COLCHESTER 17-1/2" X 84", 10-1/2" SW. OVER CROSSLIDE, 3-1/4" HOLE THROUGH SPDL., SPDS: 20-1600 RPM, 10 HP MOTOR, INCH/METRIC THDNG., INCH THDNG: 2-72 TPI, HARD BEDWAYS, 12" DIA.
ENGINE LATHE, LEBLOND 37" X 50", MDL. 3220-25HEAVY DUTY, FACTORY RAISED, 26" SW. OVER CROSSLIDE, 2-1/8" HOLE, SPDS: 10-1300 RPM, 20 HP MOTOR, INCH THDNG: 1-60 TPI, HARD BEDWAYS, TAPER ATTACH., 31-1/2"
ENGINE LATHE, RYAZAN 27-1/2, MDL. 1M636T, 14-1/2" SW. OVER CROSSLIDE, 38" SW. IN GAP FOR DIST. OF 13-1/2" IN FRONT OF CHUCK, 4-1/16" HOLE, SPDS: 10-1250 RPM, 20 HP MAIN MOTOR, INCH/METRIC THDNG., HARD
ENGINE LATHE, AXELSON 39-1/2, FACTORY RAISED IN THE SAND, 31" SW. OVER CROSSLIDE, 2-3/8" HOLE THROUGH SPDL., SPDS: 6-555 RPM, 30 HP MOTOR, INCH THDNG., HARD BEDWAYS, TAPER ATTACH., 28" DIA. 4-JAW CHUC
ENGINE LATHE, MONARCH 45" X 114", MACHINE TYPE 4431X108, MDL. 91, 31" SW. OVER CROSSLIDE, 4-1/16" HOLE THROUGH SPDL., HYD. PRE-SELECT HEADSTOCK W/SPDS: 10-375 RPM, 60 HP AC MOTOR, (48) INCH THREADS: 1
HORIZONTAL BANDSAW, WELLSAW MDL. 1016, NEW 1994, 10" X 16" RECTANGULAR CAP., 10-1/2" DIA. ROUND CAP., 16-1/2" FLATBAR CAP., 10" X 9" @ 45 DEG., 1" BLADE WIDTH, 2 HP BLADE DRIVE MOTOR, BLADE SPDS: 50-2
TILT FRAME VERTICAL BANDSAW, MARVEL SERIES 8- MARK 1, 18" X 20" @ 90 DEG., 18" X 12-1/4" @ 45 DEG., 1" BLADE WIDTH, BLADE SPDS: 50-450 FPM, 2 HP BLADE DRIVE MOTOR, PWR. INFEED TO FRAME, FRAME TILTS 45
CNC TURNING CENTER, OKUMA MDL. LC30-2SC 4-AXIS CNC LATHE, OPS 5000L CNC CONTROL, IGF PROGRAMMING, 19.69" SW. OVER BED, 17.72" MAX. TURNING DIA., 29.53" MAX. WORK LENGTH, 3.03" HOLE, SPDS: 15-3000 RPM,
CNC TURNING CENTER, JONES & LAMSON MDL. TNC COMBI 4515 CHUCKER, REBUILT & RETROFITTED 1990 W/G.E. FANUC O-T CNC CONTROL, 22-1/2" SW. OVER BED, 12-1/2" SW. OVER TURRET SLIDE, 26" MAX. DIST. FROM FACE O
CNC TURNING CENTER, JONES & LAMSON MDL. TNC COMBI 4515 CHUCKER, REBUILT & RETROFITTED 1990 W/G.E. FANUC O-T CNC CONTROL, 22-1/2" SW. OVER BED, 12-1/2" SW. OVER TURRET SLIDE, 26" MAX. DIST. FROM FACE O
CNC TURNING CENTER, JONES & LAMSON MDL. TNC COMBI 4515 CHUCKER, RETROFITTED 1995 W/G.E. FANUC SERIES O-T CNC CONTROL, 25" SW. OVER BED, 16" SW. OVER TURRET SLIDE, 40" MAX. DIST. TURRET FACE TO FACE OF
CNC TURNING CENTER, JONES & LAMSON MDL. TNC COMBI 4515 CHUCKER, RETROFITTED 1995 W/G.E. FANUC SERIES O-T CNC CONTROL, 25" SW. OVER BED, 16" SW. OVER TURRET SLIDE, 40" MAX. DIST. TURRET FACE TO FACE O
BOSTON DIGITAL CORP. MDL.14-40/646-2 BOSTOMATIC 2-HEAD, FACTORY REBUILT 4/1998, BOSTOMATIC CNC CONTROL, 14" X 69-3/8" TABLE, 40" X-AXIS LONGITUDINAL TABLE TRAVEL, 14" Y-AXIS SADDLE CROSS TRAVEL, 14" Z
BOSTON DIGITAL CORP. MDL.14-40/621-2 BOSTOMATIC, BOSTOMATIC CNC CONTROL, 14" X 69-3/8" TABLE, 1,500 LB. TABLE LOAD CAP., 40" X-AXIS LONGITUDINAL TABLE TRAVEL, 14" Y-AXIS SADDLE CROSS TRAVEL, 14" Z-AXI
MDL.14-40/621-2 BOSTOMATIC, BOSTOMATIC CNC CONTROL, 14" X 69-3/8" TABLE, 1,500 LB. TABLE LOAD CAP., 40" X-AXIS LONGITUDINAL TABLE TRAVEL, 14" Y-AXIS SADDLE CROSS TRAVEL, 14" Z-AXIS VERT. HEAD TRAVEL,
MDL. RAM 630, 1997, GIDDINGS & LEWIS NUMERIPATH 8000H 4-AXIS CNC CONTROL, DBL. 24.75" SQ. SHUTTLE PALLET 4TH AXIS TABLES W/360,000 INDEX POSITIONS, (1) EXTRA PALLET, 35.43" X-AXIS CROSS TRAVEL, 31.5"
HILLYER MDL. CNC 600 LARGE CAPACITY DOUBLE COLUMN BRIDGE TYPE, GENERAL AUTOMATION CNC CONTROL W/CRT, 41" X 64-1/2" TABLE, 6,000 LB. WEIGHT CAPACITY, 60" X-AXIS LONGITUDINAL TABLE TRAVEL, 48" Y-AXIS HE
CNC VERTICAL MACHINING CENTER, JOHNFORD MDL.DMC-2100H LARGE CAPACITY DOUBLE COLUMN BRIDGE TYPE 2007, FANUC SERIES 18I-MB 4-AXIS CNC CONTROL, 43.3" X 86.6" TABLE, 13,200 LB. MAX. TABLE LOAD CAP., 80.7"
FORKLIFT, CATERPILLAR 5,000 LB. CAP., MDL. B50B, LPG GAS ENGINE, SOLID CUSHION TIRES, 7' HT. DBL. STAGE MAST, 144" LIFT HEIGHT, 45"L. FORKS
FORKLIFT, TOYOTA 5,000 LB. CAP., MDL. 7FGCU25, NEW 2005, LPG ENGINE, 83" 3-STAGE MAST, 189" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 5,000 LB. CAP., MDL. 7FGCU25, NEW 2005, LPG ENGINE, 83" 3-STAGE MAST, 189" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 5,000 LB. CAP., MDL. 7FGCU25, NEW 2007, LPG ENGINE, 83" 3-STAGE MAST, 189" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 5,000 LB. CAP., MDL. 7FGCU25, NEW 2007, LPG ENGINE, 83" 3-STAGE MAST, 189" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, YALE 6,000 LB. CAP., MDL. GLP060TFNUAE087, PROPANE ENGINE, SOLID CUSHION TIRES, 7' HT. TRIPLE STAGE MAST, 187" LIFT HEIGHT, 60"L. FORKS
FORKLIFT, TOYOTA 6,000 LB. CAP., MDL. 7FGCU30, NEW 2006, LPG ENGINE, 84" STANDARD MAST, 130" LIFT HEIGHT, 42" FORKS, CUSHION TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 10,000 LB. CAP., MDL. 7FGCU45, NEW 2006, LPG ENGINE, 87" 3-STAGE MAST, 187" LIFT HEIGHT, 42" FORKS, CUSHION TIRES
FORKLIFT, TOYOTA 10,000 LB. CAP., MDL. 7FGCU45, 2006, LPG ENGINE, 87" 3-STAGE MAST, 187" LIFT HEIGHT, 42" FORKS, CUSHION TIRES
FORKLIFT, TOYOTA 12,000 LB. CAP., MDL. 7FGCU55, NEW 2006, LPG ENGINE, 87" STANDARD MAST, 132" LIFT HEIGHT, 42" FORKS, CUSHION TIRES
FORKLIFT, YALE 12,000 LB. CAP., MDL. GLP120MSNGBE091, 2001, 91" 3-STAGE MAST, 180" LIFT HEIGHT, 42" FORKS, PNEU. TIRES, SIDE-SHIFTER
FORKLIFT, TOYOTA 17,000 LB. CAP., MDL. T1700D, NEW 2002, DIESEL ENGINE, 212" STANDARD LIFT HEIGHT, 8' FORKS, PNEU. TIRES, FORK POSITIONER
FORKLIFT, TAYLOR 25,000 LB. CAP., MDL. TY250M, 453 DETROIT DIESEL ENGINE, 13 FOOT LIFT, 136 INCH LOWERED HEIGHT, SIDE-SHIFTER, PWR. SHIFT TRANS
FORKLIFT, TAYLOR 36,000 LB. CAP., MDL. TY360S, 36,000 LB. AT 35 INCH LOAD CENTER, 471 DETROIT DIESEL ENGINE, 20 FOOT LIFT, 100 INCH WIDE CARRIAGE, 110 INCH SHORT WHEEL BASE, PWR. SHIFT TRANS., SIZE: 1
FORKLIFT, HYSTER 62,000 LB. CAP., MDL. H620B,GMC DIESEL ENGINE, 197 INGH STANDARD MAST, 220 INCH LIFT HEIGHT, 8 FOOT FORKS, PNEU. TIRES
PEDESTAL JIB CRANE, GAFFEY 1 T. X 10'-6" REACH X 8' HOOK HT., INGERSOLL-RAND 1/2 T. CAP. ELEC. CHAIN HOIST W/PENDANT CONTROL
STRAIGHTENING PRESS, ANDERSON 10 T. CAP., MDL. HP1048-1, 3-1/4" THROAT DEPTH, 9-1/4" MAX. DIST. RAM TO TABLE, 6" X 48" SLOTTED TABLE W/WORK RESTS, MANUALLY OPERATED PORT-A-POWER TYPE HYD. PWR. PUMP
ELECTRIC HEAT TREATING FURNACE, MOORE KILN CO. MDL. MT13, 2,000 DEG. F. MAX. TEMP., INTERNAL DIMS: 13"W. X 8-1/2" HT. X 13-1/2" DP., FIRE BRICK LINED, MANUALLY OPERATED DOOR, BARBER-COLEMAN SET POINT
WADKIN BEL150 3 PHASE VERTICAL SPINDLE MOULDER C/W DALTONS TYPE BLG-8 POWER FEED M/N 03F180
WADKIN BEL 150 3 PHASE VERTICAL SPINDLE MOULDER
SEDGWICK TA450 3 PHASE TILT ARBOR SAW BENCH
CROWN 4,500 LB. NARROW AISLE ELECTRIC REACH TRUCK
MIDWEST TOP RIDING CRANE /W STAHL 5-TON HOIST, RADIO CONTRO
MINNESOTA CRANE W/ P & H 5-TON HOIST UNDERHUNG
MIDWEST 360-DEGREE JIB W/ P & H 4-TON HOIST
STREATOR DEPENDABLE DIE STORAGE RACK W/ RICOBATTERY DIE RIDER, MODEL PLA-150
CROWN 3,500 STAND-UP RIDER SIDE SHIFT
INGERSOLL RAND DRYER, MODEL TMS0540, R134A
INGERSOLL RAND 125 H.P. AIR COMPRESSOR 571 CFM, MODEL SSR-EP125
ADVANTAGE PROCESS COOLING TOWER MODEL PTS-1800-3P, YR1995
ADVANTAGE TITAN CHILLER, MODEL T1-60W, YR1995, W/ 3 PUMPS, HEAT EXCHANGER
FANUC ROBOT S-12 W/ SYSTEMS R-12 CONTROL UNIT
FANUC ROBOT R-2000A 165F W/ CONTROL UNIy
DESPATCH OVEN DOUBLE DOOR GAS FIRED MODEL PSD3-23R
SHANKLIN AUTOMATIC HEAT SEALER PACKAGER, MODEL A27A
CONAIR FRANKLIN PORTABLE RESIN DRYER W/ CONAIR ALARM & CONAIR VAC LOADER CONTROL 10077
CONAIR FRANKLIN PORTABLE RESIN DRYER W/ CONAIR ALARM & CONAIR VAC LOADER CONTROL 10076
CONAIR FRANKLIN PORTABLE RESIN DRYER W/ CONAIR ALARM & CONAIR VAC LOADER CONTROL 10085
NISSEI PLASTIC INJECTION MOLDING MACHINE MODEL TH60R5ASE
HANEL ROTOMAT PARTS & STORAGE RETRIEVAL SYSTEM 00035
HANEL ROTOMAT PARTS & STORAGE RETRIEVAL SYSTEM 10800
WHITE PARTS & STORAGE RETRIEVAL SYSTEM MODELTC-3060
MEUSER 4' ARM X 11' COLUMN RADIAL DRILL W/ BOX TABLE
BRIDGEPORT 2 H.P. VARIABLE SPEED VERTICAL MILL W/ 9" X 2" TABLE & 2-AXIS DRO
SHARP 2 H.P. 2-AXIS CNC VERTICAL MILL 10" X 50" TABLE W/ ACCU-RITE POSITIONING CONTROL
JONES & SHIPMAN 6" X 18' HAND FEED SURFACE GRINDER W/ 6" X 18" WALKER MAG CHUCK, MODEL 54OH
BRIDGEPORT 2 H.P. CNC VERTICAL MILL 9" X 48"TABLE POWER DRAW BAR ACCU-RITE 2-AXIS CONTROL
MILLTRONICS PARTNER CNC VERTICAL MILL MACHINEYR2006, MODEL VKM4, 12"X 53" TABLE, W/ 3 AXIS CNC CONTROL
Nissan PH02A200 LPG ride on forklift, capacity 1750 kgs, maximum lift height 4750mm, run hours 2,593 with all weather canopy
Atlas Copco ZT132 compressor (1998), 130kw / bar 7.5, run hours 46,941
O'Brien machinery generator, model OB1100DDW53 1104SB kva, 1449 amps, 1500 rpm
Dawson-Keith generator, 500 kva, 615 amps, 1500 rpm, Rolls Royce engine, 628 run hours
Puma diesel generator, type X595N11, 595 kva, 827 amps, 415/240v, 1500 rpm run hours 772
Saturn 5 Ton Hoist With Cross Travelling Beam
Saturn 3 Ton Hoist With Cross Travelling Beam
Saturn 3 Ton Hoist With Cross Travelling Beam
Yale 3 Ton Hoist With Cross Travelling Beam
Marvel 2150A-PC60
NEFF SERIES D PRESS MODEL-D2-5-15M, MEM 536
REGAL LEBLONDE ENGINE LATHE
2007 SPACESAVER 2200 CNC LATHEBARFEEDER MEM 2738
1971 MONARCH ENGINE LATHE MODEL-K-16, 16"x54", 16" SWING
GEKA HYDROCORP IRON WORKER MDL.HYD55 55/A
PRIMELINE 225 TON PRESS BRAKE MDL 6709, 2004,12
WYSONG 100 TON MTH100 PRESS BRAKE, CNC 99 DROW/AUTOGAGE 8 STROKE, ADJ 9, MAX DIE 17
ADIRA GHA1330 10' SHEAR
MILLER CP302 WELDER, MILLER 70 WIREFEED ON BOOM ARM
MILLER CP302 WELDER, MILLER 70 WIREFEED ON BOOM ARM
MILLER CP302 WELDER, MILLER 70 WIREFEED ON BOOM ARM
CONTROL AUTOMATION PLASMA CUTTER, MDL. BTD8X,HYPERTHERM HPR260 HIGH PERFORMANCE PLASMA, 10X50 CAP
STRIPPITT 1000 CNC TURRET PUNCH 22 TON, 40X40MAX WORKSPACE 1982, W/SOME TOOLING, COMPUTOR & MONITOR
STRIPPITT 1000 CNC TURRET PUNCH 22 TON, 40X40MAX WORKSPACE 1982, W/SOME TOOLING, COMPUTOR & MONITOR
WYSONG PH60-72 PRESS BRAKE, 6 FT , 60 TON, 61.5BET HOUSING, 6 STROKE, WYSONG MILES CNC CONTROL
BRIDGEPORT SERIES 1 2 HP MILL W/DRO, POWERFEED
PRIMELINE APH3714-350 PRESS BRAKE, 12 FT 350 T
ADIRA GHS-1330 10 FT SHEAR
MANCHESTER AIR TANK 400 GAL W/WATER/OIL SEPARATOR
KAESER TD61 AIR DRYER
KAESER SIGMA BSD50 AIR COMPRSR
NEW LINCOLN DC600 WELDER IN CRATE, W/WIRE FEED ATTACHMENT
LINCOLN ELECT DC 600 WELDING SOURCE WIREFEED ATTACHMENT, LINCOLN NA-3N WIRE FEED W/ROTATING ARM POWER FEED
JLG 2032-F2 SCISSOR LIF
DAEWOO FORKLIFT
TOYOTA 7FGU25 LP GAS FORKLIFT 189 HT, SS, 4500 LB,
TOYOTA 7FGU25 LP GAS FORKLIFT 189 HT, SS, 4500 LB
TOYOTA 7FGU25 LP GAS FORKLIFT 189 LIFT HT
TOYOTA 7FDU70 13500 LB FORKLFT DIESEL, 8 ftFORKS, 219 LFT HT
GENIE GTH-1048 ALL TERRAIN TELESCOPING FORKLIFT
TABLE MOUNTED PRESTON-EASTIN WELD POSITIONER,MDL PA-5MT
PRESTON-EASTIN WELD POSITIONER MDL PA60HD6
HYPERTHERM POWERMAX 1250 G3
HYPERTHERM POWERMAX 1250 G3
MILLER TRAIL BLAZER 280 GAS WELDER
MILLER BOBCAT 225 GAS
DIALARC 250 AC/DC WELDER
DIALARC 250 AC/DC WELDER
DIALARC 250 AC/DC WELDER
MILLER CP302 WELDER W/MILLER 22A WIRE FEED
MILLER CP302 WELDER W/MILLER 22A WIRE FEED
MILLER CP302 WELDER W/MILLER 22A WIRE FEED
MILLER CP302 WELDER W/MILLER 22A WIRE FEED
MILLER CP302 WELDER W/MILLER 22A WIRE FEED
MILLER CP302 WELDER W/MILLER 22A WIRE FEED
MILLER CP302 WELDER W/MILLER 22A WIRE FEED
Altendorf type F45 - 500mm diameter digital controlled sliding table dimension circular saw bench, (2006), complete with sliding table, 3.4m long, adjustable fence, duplex mitre fence, swing arm blade
Wadkin Bursgreen type BTS 500 - 500mm x 230mm surface planer and thicknesser
Stenner 36" vertical band re-saw complete with power feed table, adjustable gravity roller fence and 10-spare blades.
Paoloni model TX160 vertical single spindle moulder, serial no: 15359, (2005), 5.5kw complete with table 1200mm x 780mm, 5 - spindle speeds 3,000 - 10,000 rpm, Maggi 4-roller power feed unit, controls
Wadkin type EKA five head single-end tenoner test no: 88967, complete with sliding table, controls and flexible dust hoses.
Boere model select 1100kc twin head through feed calibration sander CE Mark Nom 54A, complete with 1100mm wide rubber belt conveyor, gravity roller conveyor and control panel.
Weinig model Unitmat gold six sided planer / moulde, 400 volt, 50hz, 6000 rpm, feed rate 15m per min, complete with 1.97m infeed table, controls, acoustic hood and flexible dust hose.
Palamatic type HCLE 200-1500-110kg SWL board handling system complete with twin pad vacuum flexible arm lifter, motorised vacuum pump and freestanding RSJ gantry and rail. Approximately 12.5m x 5m.
Masterwood type winner 2.2S CNC point-to-point machining centre complete with 3 motorised controlled axes, stroke 2450mm, 12 head tool changer, 5 and 4 tool magazines, 4 - sliding worktables, sensitiv
Yale Model GLC050RGNUAE082, 5,000 Lbs.LP
Bridgeport Series I, 2-HP Variable SpeedVertical Milling Machine
Chevalier Model FSG-3A-1224 H, 12 Inch x 24Inch Hydraulic Feed Surface Grinde
Landis 2R, 14 Inch x 36 Inch CC UniversalGrinder
Dyna Mechtronics Model DM-4800, Vertica
DeVlieg Spiramatic 43H-72, Jigmil HorizontalBoring, Milling and Drilling Machine
DeVlieg 43K-72, Spiramatic Jigmil HorizontalBoring, Milling and Drilling Machine
Summit Model 3 1/2 HBM, Horizontal BoringMilling and Drilling Machine
Haas Model HL-2,
Haas VF-2, CNC Vertical Machining Center
Haas VF-4, CNC Vertical Machining Center
Acer Ultima Variable Speed Vertical MillingMachine
Acer Ultima Variable Speed Vertical MillingMachine
Acer Ultima Variable Speed Vertical MillingMachine
Acer Model E Mill EV-3VHK, CNC VerticalMilling Machine
Acer Model E Mill EV-3VHK, CNC VerticalMilling Machine
Ponar Wrockaw Polamco Model Tur-50, 20 Inchx 96 Inch CC Quick Change Geared Head Lathe
Acer Model 1760G, 17 Inch x 60 Inch CC QuickChange Geared Head Lathe
Enterprise Model 1550, 15 Inch x 50 Inch CCQuick Change Geared Head Lathe
Scotchman Model 4014C, Hydraulic Ironworker
Bridgeport Series I, 2-HP Variable Speed Vertical Milling Machine
Miller Model Deltaweld 452, 450-Amp Capacity CV DC Arc Welder
FORD 4 x 4 MODEL 445-A TRACTOR LOADERBACKHOE w/ 81" Front Loader GP Bucket; 18" Backhoe Bucket; Diesel Engine with 4-Speed Transmission; Canopy; Approx. 3,500 Hrs
CLARK 6,000LB CAP. MODEL DCS30I DIESELFORKLIFT W/ TWO STAGE MAST; SOLID TIRES; 4,050 HRS
MILLER BOBCAT 250 CC/CV-AC/DC WELDER? 10,000 WATT GAS POWERED PORTABLE GENERATOR
Genesis 2 Computerized Electronic Measuring System w/Velocity Upgrade and Spare Target
Chief MODEL S-21 Chief EZ-Liner Uni-Body & Frame Repair Machine, M/N S-21, 15,000 Lb Cap
Hunter MODEL GSP-9700 Hunter Wheel Balancer, M/N GSP-9700 w/Road Force Measurement, 230 Volt, 1 PH
Corghi MODEL A-2019-RC-T1 Corghi 20 inch Rim Cap Tire Changer, Artiglio Series, m/N A-2019-RC-T1
Mohawk MODEL System 1A Mohawk 9,000 Lb Above Ground 2-Post Hyd Lift, M/N System 1A
Global MODEL A-15KT Global 15,000 Lb Above Ground 2-Post Hyd Truck Lift, M/N A-15KT
Torit Dust Collector, cartridge type with rotary air lock Model# DF72-12
Shalco/ Roberts Sinto Cold box core machine; hydraulic powered, equipped with cope eject and integral core pickoff Model# 4-101E
Shalco/ Roberts Sinto Cold box core machine; hydraulic powered, equipped with cope eject and integral core pickoff Model# 4-101E
Redford hot box core machine with auto sand pump feeder Model# HS-22-RA
2001 DISA/GOFF Spinner hanger blast shot machine, (4) 15hp blast wheels, with integral shot cleaning and FARR inc. Model GS6, dust collector unit. Model# 3672-D
1988 Goff Shot Blast Machine, with Torit dust collector, Model TD650 Model# 6BB TUMBLAST
GK Vibramill, with Wheelabrator 5000cfm shaker bag dust collector. Model# VM120
Square D Load Center, 480v, 1200amp, 3ph, 3w, E1 series with (2) 100Kvar capacitors, crib loc. Model# 120566929
CLEMCO Sand Blast unit, CAPACITY 600 Model# 2452
DAKE HYDRAULIC SHOP PRESS Model# 5-075
TOYOTA 7FGCU25 5000 LBS LPG LIFT TRUCK, 189"MAX. LIFT 4605 HOURS, CLAMP READY (3500LBS.)
TOYOTA 7FGCU25 5000 LBS LPG LIFT TRUCK, 189"MAX. LIFT 5054 HOURS, CLAMP READY (3500LBS.)
TOYOTA 7FGCU25 5000 LBS LPG LIFT TRUCK, 189"MAX. LIFT 5032 HOURS, CLAMP READY (3500LBS.)
HYSTER, S150A 15000 LBS LPG LIFT TRUCK WITH 129 MAX LIFT, 2258 HOURS
TOYOTA 7FGCU25 5000 LBS LPG LIFT TRUCK, 189"MAX. LIFT 4605 HOURS, CLAMP READY (3500LBS.)
HYSTER S155XL2 14000 LBS LPG LIFT TRUCK WITHSIDE SHIFT 147 INCH MAX LIFT, TOTAL HRS 5143.9
GORBEL 2000 LBS UNDERSLUG OVERHEAD CRANE, WITH CRANE, WITH 2 TON HOIST, 22 FT SPAN, 36 FT RUNWAY WITH UPRIGHTS, 600V, 3 PH
ONE, 10 TON DOUBLE GIRDER TOP RIDING OVERHEAD CRANE WITH 5 TON AUXILLIARY HOSIT, 30 FT SPAN
KONE, 10 TON DOUBLE GIRDER TOP RIDING OVERHEAD CRANE WITH 5 TON AUXILLIARY HOSIT, 30 FT SPAN
O'BRIEN, 20 TON, TOP RIDING CRANE DOUBLE GIRDER OVERHEAD CRANE, WITH 10 TON AUXUILLIARY HOIST, 30 FT SPAN
O'BRIEN, 20 TON, TOP RIDING CRANE DOUBLE GIRDER OVERHEAD CRANE, WITH 10 TON AUXUILLIARY HOIST, 30 FT SPAN
SUN ENGINEERING 3.1 DAMPER PRESS CELL, MODEL100 . 910480 V AC, 3 PH, 30 AMPS
ETAMIC MOVOMATIC 9 STATION DIAMOND SIZER MACHINE, MODEL 4X2SMR-IAG YR 2004, 460 V AC, 3 PH
ETAMIC MOVOMATIC 9 STATION DIAMOND SIZER MACHINE, MODEL 4X2SMR-IAG YR 2004, 460 V AC, 3 PH
GRUENBERG OVEN, 4 STATION 190 - 232 C DEGREE ELECTRIC
MICRO AIR ,RP-2 , DUST COLLECTOR ,12 FILTER UNIT
NEMAR , EMR -125 ,DIRECT GAS FIRED AIR MAKE UP SYSTEM ,25000 CFM
NEMAR , EMR -125 ,DIRECT GAS FIRED AIR MAKE UP SYSTEM ,25000 CFM
CRYOGENIC SYSTEMS SCC 1500 CRYOGENIC DEFLASHING MACHINE YR 1998, 205 DEGREES F LIQUID NITROGEN
RYOGENIC SYSTEMS SCC 3000 CRYOGENIC DEFLASHING MACHINE YR 2005, 205 DEGREES F LIQUID NITROGEN
ENGEL INJECTION MOULDING PRESS, MODEL ES 750H/ 150 H TL, WITH (2) STERLCO, L M2B2010-C, THERMOLATORS, HRS 29392, 2002
HINES HVR-2P BALANCING MACHINE CELL
HINES, HVR-2P, BALANCING MACHINE CEL
ACCUTECH, MODEL 4220 08, SERIAL #4220-08 , LOADER, WITH TWO CONVEYORS, 480 V AC, 3 PH
WF 'VAD 300' VERTICAL EDGE TWIN STATION TRIMMING MACHINE 3.54" Min. ~ 9.84" Max. Work piece Diameter, 0.157" Min. ~ 2.95" Max. Work piece Height, 7.87" Stroke of Slide in Vertical & Radial Direction,
WF, VBA 600-4 1993 machine
WF, HBA600S, HORZ. HUB SPINNER SIEMENS SINUMERIK CONTROL
WF 'VBR 600' VERTICAL PULLEY SPINNING MACHINE 3.15" Min. ~ 9.84" Max. Work piece Diameter, 11.8" Distance Between Face of Mountings with Ram in Down Position, 13.77" Stroke of Ram, 60 Ton Ram Force, 2
WF 'VBR 600S' VERTICAL PULLEY SPINNING MACHINE 3.15" Min. ~ 9.84" Max. Work piece Diameter, 23.6" Distance Between Face of Mountings with Ram in Down Position, 13.77" Stroke of Ram, 60 Ton Ram Force,
WF 'CWC 800' VERTICAL TWIN SPINDLE TRANSFER SPINNING MACHINE 1.77" Min. ~ 9.84" Max. Work piece Diameter, 5.9" Max. Work piece Height, 33.46" Max. Distance Between Main Spindles & Ram Spindles, 13.77"
WF 'CWC 800' VERTICAL TWIN SPINDLE TRANSFER SPINNING MACHINE; 1.77" Min. ~ 9.84" Max. Work piece Diameter, 5.9" Max. Work piece Height, 33.46" Max. Distance Between Main Spindles & Ram Spindles, 13.77
WF 'NAM 600' VERTICAL HUB SPINNING MACHINE 3.15" Min. ~ 9.84" Max. Work piece Diameter, 13.77" Stroke of Ram Cylinder, 30 Ton Max. Ram Cylinder Force, 15 Ton Max. Force of Spinning Slides in Vertical
WF 'NAM 600' VERTICAL HUB SPINNING MACHINE 3.15" Min. ~ 9.84" Max. Work piece Diameter, 13.77" Stroke of Ram Cylinder, 30 Ton Max. Ram Cylinder Force, 15 Ton Max. Force of Spinning Slides in Vertical
WF 'NAM 600' VERTICAL HUB SPINNING MACHINE 3.15" Min. ~ 9.84" Max. Work piece Diameter, 13.77" Stroke of Ram Cylinder, 30 Ton Max. Ram Cylinder Force, 15 Ton Max. Force of Spinning Slides in Vertical
WF 'NAM 600' VERTICAL HUB SPINNING MACHINE3.15" Min. ~ 9.84" Max. Work piece Diameter, 13.77" Stroke of Ram Cylinder, 30 Ton Max. Ram Cylinder Force, 15 Ton Max. Force of Spinning Slides in Vertical D
WF, IVM 400, VERTICAL INTERNAL SPINNING MACHINE 11.4" Min. Work piece Diameter, 13.78" Stroke of Ram Cylinder, 40 Ton Force of Ram Cylinder, 16 Ton Force of Eccentric Working Unit Radial Direction, 3.
WF, IVM 400, VERTICAL INTERNAL SPINNING MACHINE 11.8" Min. Work piece Diameter, 13.78" Stroke of Ram Cylinder, 40 Ton Force of Ram Cylinder, 16 Ton Force of Eccentric Working Unit Radial Direction, 0.
NIAGARA, ES-150 , 150 TON OBI PRESS
NIAGARA, E-200 TON, OBI PRESS
NIAGARA, E-200, 200 TON OBI PRESS, E/W UNCOILER, FEEDER & STRAIGHTER
AIDA 20, 200 TON OBI PRESS
AIDA, NC1-15002E , 165 TON GAP FRAME PRESS, 7.87" STROKE, 30-60SPM, 15.75" DIE HEIGHT, 3.94" SLIDE ADJ. 27.6" X 22.8" SLIDE AREA (LR X FB), 26.1 X 29.29 BOLSTER AREA (LR X FB)
AUFFER, MODEL RA275, 275 TON STRAIGHT SIDE HYDRAULIC PRESS (2002); 41" x 31.5" Bed Area, 42 Tons Retracting Pressure,13.8" Ram Stroke, 24" Daylight, 260 Bar Max. Operating Pressure, PBK Automation Loa
AMERICAN STEEL LINE CO., MODEL 1000, POWEREDUNCOILER 6,000 LB x 36" Wide, WITH COLT, MODEL CERFS-40-12, STRAIGHTENER & FEED 12" Wide x .150", (5) Straightening & (4) Feed Rolls x 4" Diameter, 80 ft/mi
LAUFFER, MODEL RPN320, 350 TON STRAIGHT SIDEHYDRAULIC PRESS (1994); 39.75" x 31.5" Bed Area, 30 Tons Retracting Pressure,14.5" Ram Stroke, 24.8" Daylight, 260 Bar Max. Operating Pressure, Programmabl
COLT FECOLT, MODEL CERFS-40-18, STRAIGHTENER & FEEDER ; S/N. 1141180; 18" Wide x .135", (5) Straightening & (4) Feed Rolls x 4" Diameter, 80 ft/min Max. Speed, Indramai CTA4 Control, MODEL CERF-40-18
LITTLEL, MODEL 90-30, POWERED UNCOILER & BUGGY 10,000 LB x 30" Wide Coil Capacity, 60" Max. Coil O.D., 20" ~ 24" I.D., LITTELL, 41805PD, STRAIGHTENER; S/N. 78327-70' 12" Wide x .125"
KOHAN KOBAYASHI QUICK DIE SYSTEM
BLOW 500 TON, SC2-500-120-54 STRAIGHT SIDE MECHANICAL PRESS (1999); 120" x 54" Slide & Bolster Area, 12" Stroke, 10" Slide Adjustment, 30" Shut Height (S.D.A.U) Over Bolster, 20 ~ 50 SPM, Link OMNILIN
COLT, MODEL CERFS-40-18 STRAIGHTENER & FEEEDER 18" Wide x .135", (5) Straightening & (4) Feed Rolls x 4" Diameter, 80 ft/min Max. Speed, Colt Indramai CTA4 Control
COLT, MODEL CHDRCK?1500 36' POWERED UNCOILER & BUGGY; 15,000 LB x 36" Wide Coil Capacity, 72" Max. Coil O.D., 18"~22" I.D, Hydraulic Mandrel
CCI, MODEL S2-600-48 X 144', 600 TON STRAIGHT SIDE MECHANICAL PRESS 144" x 48" Slide Area, (2) 144" x 48" x 10" Rolling Bolsters, 159" x 48" Bed Area, 48" Windows, 14" Stroke, 35" Shut Height (S.D.A.
AIDA 660 TON, MODEL TMX 'L2-600B (2) STRAIGHT SIDE MECHANICAL TRANSFER PRESS 108.2" x 47.2" Slide Area, (2) 108" x 47.2" Rolling Bolsters, 14.96" Slide Stroke, 3.93" Slide Adjustment, 11.8" ~ 23.6" Fe
MIYANO CNC LATHE, MODEL LZ -002, SERIAL #LZ020023, WITH FANUC 21 T ROBOT LOADER WITH FINISHED PARTS CAROUSEL ,COOLANT SYSTEM, CHIP CONVEYOR, 8 STATION TOOL TURRET, 11 KW SPINDLE MOTOR
MIYANO CNC LATHE, MODEL LZ -002, WITH FANUC 21 T ROBOT LOADER WITH FINISHED PARTS CAROUSEL ,COOLANT SYSTEM, CHIP CONVEYOR, 8 STATION TOOL TURRET, 11 KW SPINDLE MOTOR
HITACHI SEIKI, MODEL TS-15 CNC LATHE, 20" SWING, 11.81" MAX. MACHINING LENTH, 1.77" BAR CAPACITY, X-AXIS 7.48", Z-AXIS, 12.59", ROBOTIC PART LOADER, PARTS CONVEYORS, AUTOBURNISHER, FILTER MIST, CHIP
HITACHI SEIKI, MODEL TS-15 CNC LATHE, 20" SWING, 11.81" MAX. MACHINING LENTH, 1.77" BAR CAPACITY, X-AXIS 7.48", Z-AXIS, 12.59", ROBOTIC PART LOADER, PARTS CONVEYORS, AUTOBURNISHER, FILTER MIST, CHIP
HITACHI SEIKI, MODEL TS-15 CNC LATHE, 20" SWING, 11.81" MAX. MACHINING LENTH, 1.77" BAR CAPACITY, X-AXIS 7.48", Z-AXIS, 12.59", ROBOTIC PART LOADER, PARTS CONVEYORS, AUTOBURNISHER, FILTER MIST, CHIP
HITACHI SEIKI, MODEL TS-15 CNC LATHE, 20" SWING, 11.81" MAX. MACHINING LENTH, 1.77" BAR CAPACITY, X-AXIS 7.48", Z-AXIS, 12.59", ROBOTIC PART LOADER, PARTS CONVEYORS, AUTOBURNISHER, FILTER MIST, CHIP
MAZAK, MODEL QT-12C 2 AXIS CNC CHUCKING LATHE, 25.75" SWING, 10.78 MAX. MACHINING LENGTH, X-AXIS 5.12", Z-AXIS 11.42", FLEX GL-50N, ROBITIC LOADER/UNLOADER, FILTER MIST, CHIP CONVEYOR
MAZAK, MODEL QT-20 2 AXIS CNC LATHE, 17.32" SWING, 17.5" MAX. MACHINING LENGTH, X-AXIS 7.12", Z-AXIS 20.12", FLEX GL-50 ROBITIC LOADER/UNLOADER, FILTER MIST, CHIP CONVEYOR
HITACHI SEIKI, MODEL CS 20 VERTICAL CNC LATHE, 13.8" SWING, 6" MAX. MACHINING LENGTH, X-AXIS 51.57", Z-AXIS 14.57" , ROBOT INTERFACE, FILTER MIST, CHIP CONVEYOR, SEICOS CONTROL
HITACHI SEIKI, MODEL CS 20 0VERTICAL CNC LATHE, 13.8" SWING, 6" MAX. MACHINING LENGTH, X-AXIS 51.57", Z-AXIS 14.57" , ROBOT INTERFACE, FILTER MIST, CHIP CONVEYOR, SEICOS CONTROL
HITACHI SEIKI, MODEL CS 20 VERTICAL CNC LATHE, 13.8" SWING, 6" MAX. MACHINING LENGTH, X-AXIS 51.57", Z-AXIS 14.57" , ROBOT INTERFACE, FILTER MIST, CHIP CONVEYOR, SEICOS CONTROL
HITACHI SEIKI, MODEL CS 20 VERTICAL CNC LATHE, 13.8" SWING, 6" MAX. MACHINING LENGTH, X-AXIS 51.57", Z-AXIS 14.57" , ROBOT INTERFACE, FILTER MIST, CHIP CONVEYOR, SEICOS CONTROL
HITACHI SEIKI, MODEL CS 20 VERTICAL CNC LATHE, 13.8" SWING, 6" MAX. MACHINING LENGTH, X-AXIS 51.57", Z-AXIS 14.57" , ROBOT INTERFACE, FILTER MIST, CHIP CONVEYOR, SEICOS CONTROL
HITACHI SEIKI, MODEL CS 20 VERTICAL CNC LATHE, 13.8" SWING, 6" MAX. MACHINING LENGTH, X-AXIS 51.57", Z-AXIS 14.57" , ROBOT INTERFACE, FILTER MIST, CHIP CONVEYOR, SEICOS CONTROL
INDEX, MODEL V200, VERTICAL CNC LATHE TRAVELS (X,Z) 20.5", 7.8", WITH SIEMENS CONTROL, FEED CONVEYOR
INDEX, MODEL V200, VERTICAL CNC LATHE TRAVELS (X,Z) 20.5", 7.8", WITH SIEMENS CONTROL, FEED CONVEYOR
EASY KLEEN 4000 PSI STEAM PRESSURE WASHER, 120V BURNER, GAS POWERED, 15HP MOTOR
EASY KLEEN 4000 PSI STEAM PRESSURE WASHER, 120V BURNER, GAS POWERED, 15HP MOTOR
HOLZHER MODEL 1243 SLIDING PANEL SAW
RUCKLE GILLOUTINE VENEER CUTTER WITH 12' BEDAND RELATED
TAYLOR GLUING FERRIS WHEEL STYLE CLAMPING SYSTEM
TAYLOR FERRIS WHEEL TYPE, GLUING CLAMP CARRIER
BLACK BROTHERS, LAMINATING AND GLUING PRESS
1963 ADOLPH FRIZ HOT PRESS, MODEL DA3-360/14
TIMESAVERS PASS THROUGH SANDER WITH 60" BELT
KOMATSU MODEL FG25S, 3-STAGE FORKLIFT, PROPANE
THERMWOOD, CNC ROUTER, 5' X 12', 5-HEAD, MODEL C40;WITH TOOLING
MAYER MODEL PS92, CNC PANEL SAW, FRONT LOAD, 2003
HYSTER PIONEER 60, ALL TERRAIN, HEAVY DUTY TOW MOTOR, 2-STAGE, PROPANE, PNEUMATIC TIRE, 6,000 LB. CAPACITY, WITH FRONT MOUNT SNOW BUCKET
TIMESAVERS SPEED BELT SANDER, MODEL 337, 36"
GREENLEE MODEL 110, 36" PLANER
OLIVER 20" JOINER
CROUCH MODEL 70-48, 10-SPINDLE TURNING SANDER
HOLZNER MODEL TRIATHOLON 360 CNC EDGE BANDERWITH COMMPAKTO MODEL SR2400 RETURN
THERMWOOD CNC ROUTER, MODEL C-40, WITH TOOLING, FILE CABINET, PUMP
2007 HOFFMAN 4-HEAD, DOVE TAIL MACHINE, TYPEPP2-32/100-4, 380 VOLT, 50 HERTZ
RITTER 2", SHELF PIN, BORING MACHINE
DODDS MODEL SE 25-00, DOVE TAILER
BELL MODEL 24 DOUBLE END MITRE TRIM AND BORESAW WITH TOOLING
MARTIN MODEL T-72, SLIDING DECK TABLE SAW, 9'X 6' SLIDE DECK, 1982
JTL LANCASTER CLAMP TABLE, PNEUMATIC, MODEL 78A-CDFC-2PM
JTL LANCASTER CLAMP TABLE, PNEUMATIC, MODEL 78A-CDFC-2PM
JTL LANCASTER CLAMP TABLE, PNEUMATIC, MODEL 78A-CDFC-2PM
UHLING MODEL HP3000 CASE CLAMP
UHLING MODEL HP3000 CASE CLAMP
UHLING MODEL HP3000 CASE CLAMP
Toyota Model 42-4FG25 Forklift, Pneu. Tire, LP, 3-Stage Mast, Side Shift, 4,300 lb. Cap.
Toyota Model 42-5FG25 Forklift Pneu.Tire, LP, 3-Stage Mast, Side Shift, 4,300 lb.Cap.
Thermal Dynamics PAK Master 100XL Plasma Cutter
Thermal Dynamics PAK Master 50XL Plasma Cutter
Nelson NCD100 Stud Welder
Miller XMT304 CC/CV DC Inverter Arc Welder
Miller XMT304 DC Inverter Arc Welder
Miller XMT304 DC Inverter Arc Welder
Miller XMT304 CC/CV DC Inverter Arc Welder
Miller Millermatic 350P Mig Welder
Miller Millermatic 350P Mig Welder
Miller Millermatic 350P Mig Welder
Miller Syncrowave 300 TIG Welder
Miller Syncrowave 350 TIG Welder
Miller Syncrowave 350LX TIG Welder
VK 30:40 oversize platen press with Dwell timer control console.
SVECIA 30:40 oversize Screen Printing System, type SPM, Model SM5. With Natgraph exposure unit, UV Abbess Dryer and pallet stacker.
GENERATOR, O'BRIEN ENERGY SERVICES MDL.OB30K-DW63, 30 KW, 120/240 V., 90 AMPS, DIESEL PWRD., TRAILER
GENERATOR,O'BRIEN ENERGY SERVICESMDL. OB30K-DW63, 30 KW, 120/240 V., 90 AMPS, DIESEL PWRD., TRAILER MTD
GENERATOR, CMD MDL. CMD33, 33 KW, SGL. PHASE,120/240 V., 275/137.5 AMPS, DIESEL PWRD., TRAILER MTD.,
FORKLIFT, CLARK 8,000 LB. CAP., MDL. IT80, 42"L. FORKS, SGL. STAGE MAST, 138" HT., GASOLINE ENGINE, YARD TIRES
Hyster Elec Stand-Up Forklift, M/N E30CR 3,000 Lb Cap, 106" Height, Solid Tires, 2-Stage Mast, R.O.P.S., 36 Volt, 2077 Hours, w/Charger
Hyster Elec Forklift, M/N E60XL 6,000 Lb Cap, 159" Height, Solid Tires, 3-Stage Mast, R.O.P.S., 48 Volt, Sideshift, 2141 Hours, W/Charger
Clark Propane Forklift, Model G 3,000 Lb Cap, 108" Height, Solid Tires, 2-Stage Mast, R.O.P.S., 1735 Hours
Donaldson Torit Dust Collector Model DFT-2-8
Hyster Model E50XL-27 Fork Lift, 187" Lift, 36 volt, 5000# Cap,
2004 Superior-MPM Technologies Extruder System, 3 1/2", 24:1 Ratio, 60-HP Motor, 4-Zone, (1) Novatec Dryer/Hopper, (1) Novatec Vacuum Loader Stainless Steel, (1) Novatec Hopper Stainless Steel, (1) A
Lantech Q Series Stretch Wrap Machine 65" Circular Platform, 10' Column
Chevalier FSG-618AD Surface Grinder
1995 Alloyd Model 16SC12166RF Automatic BlisterPack Machine, Infeed, Cassette Header, Card Feeder, Back Blisterpack Feeder, Front Blisterpack Feeder, Unload Section, 1995 Thermatron Model F10 Magnetic
John Verdvin Machine Corp. 48 Tons Calendar 48" MinPak Plus VS Drive, Capitol Model HT-1-48
Dusenbury Model 635 AL and Model 863AK Slitter/Rewind, 48", Dusenbury
Donlee Boiler Model SPHV-40N 93947 Firing Rate 1675, Rated BTU 1,339,000, Steam 150 Max Steam 1725 LBS/HR
Dri-Tec 2003 Gravure Press Wax Offset Differential Type Carbon Coating 27" TC 36" Web Width 24" Roll Diameter 6' Core Inside Diameter 1,200 Feet Per Minute Line Speed Unwinder Rewinder Moxon Model HS4
Krupp 1980 Carbon Coating Gravure Press Single Stand Type Approx 37" Max Width Rated At 600 Feet Per inute Single Position Unwind Web Alignment System Application Tray Chill Roll Stand Rewind Position
Hyster Mod.120XM 12,000# Gasoline Forklift ?
Hyster Mod.S50 5,000# Propane Forklift
BobCat Mod.773 Bucket Loader
Cementech Mod.SCD2 ? 5OH Dual Bin StationaryConcrete Dispenser
Davi Mod.MCA3017 10' x 8/10GA 4 Roll Double ?Pinch Plate Bending Roll 8 ? 10GA Bending Capacity, Hydraulic Drop End, Cone Bending, Digital Operators Console, (4) Hardened Rolls, AC Motor
Cincinnati Mod.1812 12' x ?" Power Squaring Shear 36" Power Back Gage, Hydraulic Hold Downs, Support Arms, Foot Treadle, 10HP AC Motor
Cincinnati Series 9 12' x 225 Ton Press Brake 10' 6" BTW Housings, 150 Ton Mid ? Stroke, 12" Shut Height, 3" Stroke, Motorized Ram, Flush Floor Mount, 15 HP AC Motor
Comaca Mod.EHN260/5 10" x 10" x 1/8" Hyd. Power Notcher 10 1/8" x 10 1/8" x 1/8" Max Notch, 45 SPM, 33" x 27 ?" Table, 4HP AC Motor 230/3/60
731364, Blade Welder & Grinder, 24" x 24" Tilt ? Table, 50 ? 5200 FPM Blade Speed, 1.5HP AC Motor
Okada Model VM500 CNC Vertical Machining Center Fanuc 6MB CNC Control, 27.6 in. x 16.9 in. x 24.8 in. Travels, 6,000 RPM, 20 ATC, 40 Taper
Fadal Model 4020A-HT CNC Vertical Machining Center CNC 88HS CNC Control, 40 in. x 20 in. x 20 in. Travels, 10,000 RPM, Hi-Torque, 21ATC, 40 ATC
Okuma & Howa Model 4VA CNC Vertical MachiningCenter New 1983, Fanuc 6MB CNC Control, 32.2 in. x 14.1 in. x 19 in. Travels, 11/7.5 H.P., 24ATC, 40 Taper, Geared Head
Devlieg Model 43H-48 Spiramatic Jig Mill 4 in. Spindle, 50 Taper, Sony DRO, 35 in. x 48 in. Table, 48 in. Long. Travel, 16 in. Platen Travel, 48 in. Vert. Travel, Power Drawbar, 20 in. Spindle Travel
1997 MITSUBISHI FX10 EDM MODEL-FX10,
1992 200HI MITSUBISHI EDM MAXIMUM WORKPIECE DIMENSIONS: 25.59X29.53X10.24, MACHINE RANGE: (X-Y) 15.75X29.53, SELF THREADING
2004 HAAS VERTICAL CNC MODEL-VF-3SS
1998 HAAS VERTICAL CNC MODEL-VF-3
2000 HAAS VERTICAL CNC MODEL-SL30
2000 HAAS VERTICAL CNC MODEL-VF-6/50
1998 HAAS VERTICAL CNC MODEL-VF-3,
1977 IKEDA RADIAL ARM SAW MODEL-RM-1575
1977 MATTISON GRINDER MODEL-N/A 3'X8' MAG CHUCK
1941 BLANCHARD 36" ROTORY MODEL-18
2001 CHEVELIER AUTO GRINDER 1632 MODEL-FSG-1632AD II
2004 CHEVELIER AUTO GRINDER 1640 MODEL-FSG-1640AD II
GARDENER HAND FEED SURFACE GRINDER MODEL-618,
GARDENER HAND FEED SURFACE GRINDER MODEL-618,
1999 BRIDGEPORT VERTICAL MILL MODEL-2J 9"X48" T SLOT TABLE, 2 AXIS DRO, KURT POWER DB, CHROME WAYS & POWER FEED
CHEVALIER VERTICAL KNEE MILL MODEL-FM 3VKH3 AXIS POWER FEED, 9"X42" T SLOT TABLE, 3HP, KURT POWER DRAW BAR, ACU-RITE DRO
1997 ELECTRA ELECTRIC OVEN MODEL-182538 H D 12 18"X24"36" CHAMBER, 2200 DEGREE F CONTROLLED, LOWER DRAWING CHAMBER
2005 QUINCY AIR COMP W/ DRYER MODEL-151150-633,
INGERSOLL RAND AIR DRYER MDL#TMS-0200
INGERSOLL RAND SSR-UP6-30-125 AIR COMPRESSOR WITH CONTROL BOX
BLACK BROS TOP/BOTTOM PANEL CLEANER 56" WIDE 3/4 HP
TIMESAVERS SPEED 63" SPEED BELT SANDER MDL#364-1HD
300 52" BELT SANDER MDL#352-2VA
Jet-A 450 GPM Towable Hydrant Dispenser for Commercial & Military Aviation, Solar Power Source
Skycart 900 GPM Hydrant Dispenser for Commerical & Military Aviation, Jet Refueler, Kubota DieselEngine, Primary & Secondary Control Valve, NEW
Toyota Model 42-4FG25 Forklift, Pneu. Tire, LP, 3-Stage Mast, Side Shift, 4,300 lb. Cap.
Toyota Model 42-5FG25 Forklift, Pneu.Tire, LP, 3-Stage Mast, Side Shift, 4,300 lb.Cap.
Thermal Dynamics PAK Master 100XL Plasma Cutter
Thermal Dynamics PAK Master 50XL Plasma Cutter
Nelson NCD100 Stud Welder
Miller Millermatic 250 Mig Welder
Miller Millermatic 250 Mig Welder
Miller XMT304 CC/CV DC Inverter Arc Welder w/ Miller Spoolmatic Wire Feed Gun
Miller XMT304 DC Inverter Arc Welder w/ Miller 24 Volt Constant Speed Wire Feeder
Miller XMT304 DC Inverter Arc Welder w/ Miller 60 Series Wire Feeder
Miller XMT304 DC Inverter Arc Welder w/ Miller 60 Series Wire Feeder
Miller XMT304 DC Inverter Arc Welder w/ Miller 60 Series Wire Feede
Miller XMT304 CC/CV DC Inverter Arc Welder, w/ Miller XR Control Extended Reach WireFeeder
Miller Millermatic 350P Mig Welder
Miller Millermatic 350P Mig Welder
Miller Syncrowave 300 TIG Welder
Miller Syncrowave 350 TIG Welder
Miller Syncrowave 350LX TIG Welder
Cincinnati Model 90-10 Mechanical Press Brake, SN 27376, 12 Ft. Overall Length, 10 Ft. 6 In. B.H., 3In. Stroke, Hurco Autobend IV CNC Backgauge
DoAll "Zephyr" 36 In. High Speed Vertical Bandsaw
Buffalo Model 1-1/2 Mechanical Ironworker, 58-Ton, 4 In.x 4 In.x 1/2, Coper, Notcher, Punches & Dies
Stamco 12 Ft.x 1/4 In. Gap Frame Mechanical Squaring Shear, 18 In. Throat, Dual Palm Buttons
SEYPA 168 UC-1 SE Original Perfecta Polygraph guillotine. 5250kg mass.
SVECIA 30:40 oversize Screen Printing System, type SPM, Model SM5. With Natgraph exposure unit, UV Abbess Dryer and pallet stacker. Year of manufacture 1999. Includes Hydrovane 87/404 compressor and w
GEOPHONE TESTING SYSTEM, SMT MDL. 200, W/DOCKING STATION
ENCODE SWEEP GENERATOR, PELTON ADVANCE TWO, VERSION 4.2

GENERATOR, O'BRIEN ENERGY SERVICESMDL.OB30K-DW63, 30 KW, 120/240 V., 90 AMPS, DIESEL PWRD., TRAILER MTD.
GENERATOR, O'BRIEN ENERGY SERVICESMDL. OB30K-DW63, 30 KW, 120/240 V., 90 AMPS, DIESEL PWRD., TRAILER MTD.
GENERATOR, CMD MDL. CMD33, 33 KW, SGL. PHASE,120/240 V., 275/137.5 AMPS, DIESEL PWRD., TRAILER MTD.
FORKLIFT, CLARK 8,000 LB. CAP., MDL. IT80, 42"L. FORKS, SGL. STAGE MAST, 138" HT., GASOLINE ENGINE, YARD TIRES
Hyster Elec Stand-Up Forklift, M/N E30CR, 3,000 Lb Cap, 106" Height, Solid Tires, 2-Stage Mast, R.O.P.S., 36 Volt, 2077 Hours, w/Charger
Hyster Elec Forklift, M/N E60XL, 6,000 Lb Cap, 159" Height, Solid Tires, 3-Stage Mast, R.O.P.S., 48 Volt, Sideshift, 2141 Hours, W/Charger
Clark Propane Forklift, Model G, 3,000 Lb Cap, 108" Height, Solid Tires, 2-Stage Mast, R.O.P.S., 1735 Hours
Donaldson Torit Dust Collector Model DFT-2-8 ,5HP, 208/460
Hyster Model E50XL-27 Fork Lift, 187" Lift, 36 volt, 5000# Cap
MEC 1932ES Sissor man Lift 500# Cap., 18' 10" Lift, Model 1932 ES, 1998, 24 VDC
Lantech Q Series Stretch Wrap Machine 65" Circular Platform, 10' Column
Chevalier FSG-618AD Surface Grinder, Coolant
1995 Alloyd Model 16SC12166RF Automatic BlisterPack Machine, Infeed, Cassette Header, Card Feeder, Back Blisterpack Feeder, Front Blisterpack Feeder, Unload Section, 1995 Thermatron Model F10 Magnetic
John Verdvin Machine Corp. 48 Tons Calendar, 48" MinPak Plus VS Drive, Capitol Model HT-1-48
Dri-Tec 2003 Gravure Press Wax Offset Differential Type Carbon Coating 27" TC 36" Web Width 24" Roll Diameter 6' Core Inside Diameter 1,200 Feet Per Minute Line Speed Unwinder Rewinder Moxon Model HS4
Krupp 1980 Carbon Coating Gravure Press Single Stand Type Approx 37" Max Width Rated At 600 Feet Per inute Single Position Unwind Web Alignment System Application Tray Chill Roll Stand Rewind Position
Hyster Mod.120XM 12,000# Gasoline Forklift ?48" Forklength, 185" Max Height, Solid Tires, Over ? Head Guard
Hyster Mod.S50 5,000# Propane Forklift ? 48" Forklength, 188" Max Height, Solid Tires, Over ? Head Guard
BobCat Mod.773 Bucket Loader ? C ? Series, 1850LB Operating Cap, Low Hours, 68" Bucket.
Cementech Mod.SCD2 ? 5OH Dual Bin StationaryConcrete Dispenser
Davi Mod.MCA3017 10' x 8/10GA 4 Roll Double ?Pinch Plate Bending Roll ? 8 ? 10GA Bending Capacity, Hydraulic Drop End, Cone Bending, Digital Operators Console, (4) Hardened Rolls, AC Motor
Cincinnati Mod.1812 12' x ?" Power Squaring Shear ? 36" Power Back Gage, Hydraulic Hold Downs, Support Arms, Foot Treadle, 10HP AC Motor
Cincinnati Series 9 12' x 225 Ton Press Brake? 10' 6" BTW Housings, 150 Ton Mid ? Stroke, 12" Shut Height, 3" Stroke, Motorized Ram, Flush Floor Mount, 15 HP AC Motor
Comaca Mod.EHN260/5 10" x 10" x 1/8" Hyd. Power Notcher ? 10 1/8" x 10 1/8" x 1/8" Max Notch, 45 SPM, 33" x 27 ?" Table, 4HP AC Motor 230/3/60
DoAll Mod.1612 ? 0 16 " Vertical Band Saw ? Blade Welder & Grinder, 24" x 24" Tilt ? Table, 50 ? 5200 FPM Blade Speed, 1.5HP AC Motor
Okada Model VM500 CNC Vertical Machining Center Fanuc 6MB CNC Control, 27.6 in. x 16.9 in. x 24.8 in. Travels, 6,000 RPM, 20 ATC, 40 Taper
Fadal Model 4020A-HT CNC Vertical Machining Center CNC 88HS CNC Control, 40 in. x 20 in. x 20 in. Travels, 10,000 RPM, Hi-Torque, 21ATC, 40 ATC
Okuma & Howa Model 4VA CNC Vertical MachiningCenter Fanuc 6MB CNC Control, 32.2 in. x 14.1 in. x 19 in. Travels, 11/7.5 H.P., 24ATC, 40 Taper, Geared Head
Bridgeport 1 1/2 H.P. Variable Speed VerticalMill , Acu-Rite DRO, Servo Feed X & Y
Devlig Model 2B-36 Spiramatic Jig Mill, 2.5 In. Spindle, 40 Taper, Power Drawbar, Sargon DRO, 36 In. x 24 In. Table, 36 In. Long. Travel, 12 In. Platen Travel, 24 In. Vertical Travel, 12 In. Spindle T
Devlig Model 3H-48 Spiramatic Jig Mill, 2-Axis Programmable Control, 3 In. Spindle, 40 Taper, Power Drawbar, Acu-Rite DRO, 48 In. x 35 In. Table, 48 In. Long. Travel, 16 In. Platen Travel, 24 In. Vert
Devlig Model 2B-36 Spiramatic Jig Mill, 2.5 In. Spindle, 40 Taper, Power Drawbar, Acu-Rite DRO, 36 In. x 24 In. Table, 36 In. Long. Travel, 12 In. Platen Travel, 24 In. Vertical Travel, 12 In. Spindle
Devlieg Spiramatic Model 3H-72 Horizontal JigMill 3 In. Spindle, 40 Taper, Acu-Rite DRO, 35 In. x 72 In. Table, 72 In. Long. Travel, 16 In. Platen Travel, 60 In. Vertical Travel, 16 In. Spindle Trave
Go Breath APC=582G Trash Compactor
Ram Jet 4470 Trash Compactor
Ingersoll Rand 184145U90329 Diesel Portable Air Compressor
Crown RD3020-30 3000lb Electric Lift
Raymond EASI 4000lb Electric Lift w/Charger
Raymond EASI 4000lb Electric Lift w/Charger
Raymond 537-CSR30T 3000lb Electric Order Picker Lift w/Charger
DoAll TF-1421H Vertical Metal Cutting Band Saw
DoAll TF-202M Vertical Metal Cutting Band Saw
Thermwood Mdl 53 CNC Controlled Panel Saw with 5ft x 11ft Deck
TOYOTA 3,000 LB. LIFT TRUCK MODEL 7FGCU18, LP 189" LIFT SIDE SHIFT SOLID TIRES
KOMATSU 3,580 LB. LIFT TURCK MODEL FG205T-11 188" LIFT LP SOLID TIRES SIDE SHIFT
YALE 4,000 LIFT TRUCK MODEL GLC040AFNUAE082, LP 129" LIFT SIDE SHIFT SOLID TIRES
CLARK 6,000 LB. LIFT TRUCK MODEL G, LP 147" LIFT PNEUMATIC TIRES
HYSTER 25,000 LB. LIFT TRUCK MODEL H250XL DIESEL 161.5" LIFT PNEUMATIC / DUAL FRONT TIRES HEAT CAB
HYSTER 28,000 LB. LIFT TRUCK MODEL H280X. LP 147.6" LIFT FORK SHIFT IN & OUT PNEUMATIC DUAL FRONT TIRES, HEAT CAB
GARDNER DENVER 100 H.P. ROTARY SCREW AIR COMPRESSOR MODEL EAPQMD
BAKER PRODUCTS RESAW MODEL BBR-O, POWER FEED 12" MAX WIDTH 30 H.P.
RIAMANN GANG RIP SAW TYPE RM-US-BV EXTRA 12" BLADES CART & STAND
MATTISON RIP SAW MODEL 404 4" MAX. THICKNESS24" RIP 15 H.P.
WHITNEY 36" WIDTH PLANER MODEL S290 MAX THICKNESS 40 H.P. HEAD MOTOR
DISA BAGHOUSE DUST COLLECTOR MODEL NFK2000, 6T1HJLR W/ BLOWER
MATTISON RIP SAW MODEL 404, 4" MAX. THICKNESS24" RIP 15 H.P.
MATTISON RIP SAW MODEL 404 4" MAX THICKNESS,24" RIP 15 H.P.
MATTISON RIP SAW MODEL 404 4" MAX THICKNESS,24" RIP 15 H.P.
TAYLOR 80-POSITION GLUE WHEEL, 8' WIDTH X 30" LENGTH
INGERSOLL RAND 60 H.P. ROTARY SCREW AIR COMPRESSOR MODEL SSR-EP60
OPITICUT MODEL 304R 9" X 28' EXIT CONVEYOR 4/4 PUSHERS
GRECON DIMTER OPTICUT 304R
GRECON DIMTER OPICUT 304L
PROGRESSIVE SYSTEM GANG RIP SAW 36" ARBOR (15) BLADES EXTRA ARBORS & BLADES
00' X 78" ROLLER FEED CONVEYOR, JOULIN-AEROSTACKER UNLOAD SYSTEM W/ 6 & 7 STRAND INSPECTION DECK
WILLIAMS PATENT CRUSHER 125 H.P. 75H.P. BLOWER GRECON DIMTER OPTIMIZING LINE
JOULIN-AERO ROUGH LUMBER VACUUM STACKER DUALHEAD 6' MAX. UNLOADING CLEARANCE 84" X 39" VACUUM HEADS
MATTISON 404 RESAW 54" X 78" TABLE
YATES AMERICAN ROUGH PLANER, MODEL B-26-E 30" MAX. WIDTH X 4" MAX. THICKNESS DUAL HEAD 75 H.P.UPPER, 40 H.P. LOWER 15-H.P. FRONT & REAR FEED
GRECON DIMTER 4-STRAND UNLOADER 10' 6" X 20'X 15' HYDRAULIC TILTER 20-H.P. 12' X 21' INSPECTION DECK 5-STANDS
GARDNER DENVER 75 H.P. ROTARY SCREWW AIR COMPRESSOR 44,663 HRS
INGERSOLL RAND SSR EP-75 AIR COMPRESSOR 39908 HOURS ROTARY SCREW
SIMONDS AUTOMATED BENCH-TENSION & HEAD LEVELER MODEL OPTIMATIC RSM0980
CLEEREMAN SAW ASSEMBLY WHICH INCLUDES SANBORN150 H.P. BI-DIRECTIONAL BAND MILL 32" THROAT, CLEEREMAN CONTROL BOOTH W/ SILVATECH CONTROLS, CURVE CATCHER MODEL FCC-107D, LASER LOG SITE, CLEEREMAN 50' HY
CLEEREMAN SAW ASSEMBLY WHICH INCLUDES SANBORN200 H.P. BI-DIRECTIONAL BAND MILL 32" THROAT CLEEREMAN CONTROL BOOTH W/ SILVATECH CONTROLS, CURVE CATCHER MODEL FCC-1070 LASER LOG SITE CLEEREMAN 60' REGEN
CLARK 4000LB LP FORK TRUCK ENCLOSED CAB, 8,585 HRS, 188" LIFT HEIGHT, MODEL-GPX40, INDOOR/OUTDOOR
HERCULES MODEL NO. 90L4 - 3/8 DRILL
CLAUSING MODEL 17 COLCHESTER METAL LATHE APPROX 4ft. BED
BRIDGEPORT MODEL NO. A022995 -
MINISTER P2-100-36 PIECE MAKER PRESS 100 TON CRANK PRESS
HARRISON MODEL NO. M300
SOUTHBEND MODEL NO. 60 FW- 60 TON PRESS
MAZAK MAZATROL V-515/40 VERTICAL MACHINING CENTER, 36-POSITION TOOL HOLDER, AUTOMATIC TOOL CHANGER, 22'' X 51'' TABLE, MAZATROL M-PLUS CONTROLS, 50 TAPER,
OKAMOTO 6'' X 18'' HAND FEED SURFACE GRINDER,WITH 6'' X 18'' PERMANENT MAGNETIC CHUCK, AC MOTOR & CONTROLS
Autolabe Mdl. 630 Conveyor Automatic Bottom Tray Labeler
Model 150PFII-G "Press Former" Gap Frame Hyd. Press 150-Ton Max Pressing Cap.,100-Ton Max. Punching Cap., 46 In.x 24 In. Bed, 34In.x 21 In. Ram, 12 In. Stroke, 10 In. Closed Ht.,22 In. Open Ht., 13 In
VERTICAL MILL VARI-SPEED HEAD 9 X48 T-SLOT TABLE POWER FEED DRO 2 H.P.
ROUSSELLE MODEL NO. OBI6E - 6 TON - PRESS -
BRIDGEPORT MODEL-2J, 9"X48" TSLOT TABLE, 2 AXIS DRO, KURT POWER DB, CHROME WAYS & POWER FEED
1995 BRIDGEPORT VERTICAL MILL MODEL-2J,9"X48" T SLOT TABLE, 3 AXIS DRO, KURT POWER DB, CHROME WAYS
2000 3R ROBOT EDM MODEL-RM 57/30
1997 MITSUBISHI FX10 EDM MODEL-FX10, HOURS: 22,819
1992 200HI MITSUBISHI EDM MAXIMUM WORKPIECE DIMENSIONS: 25.59X29.53X10.24, MACHINE RANGE: (X-Y) 15.75X29.53, SELF THREADING
2004 HAAS VERTICAL CNC MODEL-VF-3SS, RUN TIME: 15,046, TOOL CHANGES: 56,328, GLASS SCALES
1998 HAAS VERTICAL CNC MODEL-VF-3, RUN TIME: 14,999, TOOL CHANGES: 301,705, GLASS SCALES, 1000 PSI CHIP BLASTER
2000 HAAS VERTICAL CNC MODEL-SL30, RUN TIME: 15,084, TOOL CHAGES: 40,397
2000 HAAS VERTICAL CNC MODEL-VF-6/50, RUN TIME: 20,188, TOOL CHANGES; 49,690, GLASS SCALES
1998 HAAS VERTICAL CNC MODEL-VF-3, RUN TIME: 21,998, TOOL CHANGES: 303,342, 1000 PSI CHIP BLASTER
1977 MATTISON GRINDER MODEL-N/A, 3'X8' MAG
941 BLANCHARD 36" ROTORY MODEL-18
2001 CHEVELIER AUTO GRINDER 1632 MODEL-FSG-1632AD II
2004 CHEVELIER AUTO GRINDER 1640 MODEL-FSG-1640AD II
GARDENER HAND FEED SURFACE GRINDER MODEL-618, 6X18 MAGNETIC CHUCK
GARDENER HAND FEED SURFACE GRINDER MODEL-618, 6X18 MAGNETIC CHUCK
1999 BRIDGEPORT VERTICAL MILL MODEL- 2J, 9"X48" T SLOT TABLE, 2 AXIS DRO, KURT POWER FEED, CHROME WAYS & POWER FEED
1999 BRIDGEPORT VERTICAL MILL MODEL-2J 9"X48" T SLOT TABLE, 2 AXIS DRO, KURT POWER DB, CHROME WAYS & POWER FEED
CHEVALIER VERTICAL KNEE MILL MODEL-FM 3VKH 3 AXIS POWER FEED, 9"X42" T SLOT TABLE, 3HP, KURT POWER DRAW BAR, ACU-RITE DRO
2005 QUINCY AIR COMP W/ DRYER MODEL-151150-633
1993 BRIDGEPORT VERTICAL MILL MODEL-2J 9"X48" T SLOT TABLE, 2 AXIS DRO, KURT POWER DB, CHROME WAYS & POWER FEED
TOYOTA ELECTRIC FORKLIFT 2500LBS CAP WITH 6FT FORK EXTENTIONS 3 STATE MEST. W CHARGER
HYSTER 80 ELECTRIC FORKLIFT 8000LBS CAP WITH 8FT FORK EXTENTIONS & CHARGER
INGERSOLL RAND SSR-UP6-30-125 AIR COMPRESSOR WITH CONTROL BOX
Crown Electric Fork Lift Truck, model 35SCTT 3000 lb, 1563 hrs, w/ side-shift, triple-mast, battery & charger
MINISTER P2-100-36 PIECE MAKER PRESS 100 TONCRANK PRESS
HARRISON MODEL NO. M300 - LATHE
BRIDGEPORT MODEL NO. - MILL
ROUSSELLE MODEL NO. OBI6E - 6 TON - PRESS - SERIAL NO. 23313
Komatsu Model FG20-6 Rough Terrain Forklift 4,000 lb. Cap., Gas, Manual Transmission, DualWheels on front, 2-Stage Mast
Toyota Model 42-5FG25 Forklift 4,600 lb. Cap., Pneumatic Tires, LP, 3-Stage Mast
MEC Electric Scissor Lift, 30in.x96in. Platform, Charger
W.A. Whitney Model 701-702 10H.P. Hyd. PowerUnit
W.A. Whitney Model 771-000 C-Frame Hyd. Punch 70 Ton Cap., New 2005
W.A. Whitney Model 701-702 10H.P. Hyd. PowerUnit
W.A. Whitney Model 791-019 C-Frame Hyd. Punch 100 Ton Cap., New 2008
W.A. Whitney Model 790-084 C-Frame Hyd. Punch 100 Ton Cap., New 2008
Miller Deltaweld 652 Mig Welder ,w/ Miller Wire Feeder
Lincoln Model Invertec V350-PRO Mig Welder w/ Lincoln LN-7 WireFeeder & Mig Gun
Lincoln Model Invertec V350-PRO Mig Welder w/ Lincoln LN-7 WireFeeder & Mig Gun
Lincoln Model Invertec V350-PRO Mig Welder w/ Lincoln LN-7 WireFeeder & Mig Gun
Wells Mfg. Model 1118 Horizontal Bandsaw 11in.x18in. Cap., 1in. Blade, Infeed & OutfeedConveyor
Piranha Model P120 Hydraulic Ironworker 120 Ton, 6in.x6in.x5/8in. Angles,2in. Round Bar Shear, 1in.x12in. Plate Shear, 4in.x6in.x3/8in. Coper/Notcher, Punches & Dies, PressBrake Attch, Angle & Straig
Cincinnati 135 Ton Press Brake, M# 135 Ton,
Piranha 65 Ton X 8' Hydraulic Press Brake, M#6508 24" Prog. Back Gage, Piranha Generation II Control System, 2004
Kingsland Iron Worker, M# 125XZ Hyd,
Scotchman 120 Ton Ironworker, M# 12012-24M
Leroi CL 30SS RS Air Compressor, Model CL30SSAH
Wellsaw 16" x 18" Horizontal Band Saw
Nordson Powder Coat Line, W/ Spray Booth, Wash System & (2) Ovens, (Located in Madison, Indiana)
Binks Mono Rail Powder Coat Line, W/ 30' Longx 60" Wide Application Booth, W/ Reclaim, Sames Controls & Electrostatic Guns, Approx. 450' Long General Fab Monorail, Fremont Industries 3-Stage Phosphate
Bullard 32" Vertical Turret Lathe, M# Cutmaster W/ Ram Head, Turret Head, Side Head, 5.5 to 200 RPM, 42" Dia. 4-Jaw Table, Anilam Wizard 450 3-Axis DRO
Ransom 2500# Welding Positioner, M# E9992
5 Ton Robbins & Myers Triple Girder Under Slung Travel Crane, 60' Span, 20' Lift, Pendant & Remote Control
3500# Caterpillar 35 GPI LPG Fork Lift, 3 Stage Mast, Side Shift, 42' Forks, Pneumatic Tires, ROPS
5000# Caterpillar 50 LPG Fork Lift, Model GC25, 3 Stage Mast, Side Shift, 42" Forks, ROPS
5000# Yale GLP050RENUAE086 LPG Fork Lift, Side Shift, 3 stage Mast, 42" Forks, Windshield, ROPS
500# Hyundai Model HLF25 II LPG Fork Lift, Side Shift, 3 Stage Mast, 42" Forks, Cab Enclosure, ROPS
Wellsaw 16" x 18" Horizontal Band Saw
LeBlond Regal 32" x 40" Raised Head Engine Lathe18/720 RPM, 16" Dia. 3-Jaw Chuck
Kent 8" x 16" Surface Grinder, M# KGS 250AH Hyd. 8" x 16" Chuck, Coolant System, 1 Shot Lube
Grob 18" Vertical Band Saw, M# NS18 W/ Blade Welder
Mori Seiki CNC Vertical Machining Center, M#MV Junior W/ Fanuc 10M CNC Control w/CRT, CAT 35 Taper, 16" x 36" T-Slot Table, (30) Station ATC, Chip Pan, Coolant
Vibrodyne Vibratory Finisher, M# VE 600
HAAS CNC Vertical Machining Center, M# VF 6 w/ Haas CNC Control, Color CRT, CAT 40 Taper, 28" x 64" T-Slot Table, (24) Station ATC, Auger Chip Conveyor, Coolant System, Haas 4th Axis
Clausing Colchester 12" x 38" Engine Lathe, M# VS12 60/2500 RPM, 8" Dia. 3-Jaw , Anilam Wizard 450L 2-Axis DRO, Collet Closer
Clausing Variable Speed 21" Drill Press
TORIT MODEL DFT3-12 15HP DOWNFLO DUST COLLECTOR01
YALE MODEL ERC060FCN48SE07 6000# SIT DOWN ELECTRIC FORKLIFT TRUCK, WITH SOLID TIRES, 172'' REACH
DEMAG 10 TON FREE STANDING BRIDGE CRANE, WITH7' WIDE X 42'' LONG X 7'6'' UNDER HOOK, PENDANT CONTROL, ELECTRIFIED RAIL
BLANCHARD MODEL #20 36'' VERTICAL ROTARY SURFACE GRINDER, WITH SEGMENTED WHEEL, NEUTROFIER, APPROXIMATELY 18'' UNDER WHEEL, AC MOTOR & CONTROLS
KAESER MODEL AS30 20HP ROTARY SCREW TYPE TANKMOUNTED AIR COMPRESSOR
RESSER 15HP 3-STAGE TANK MOUNTED AIR COMPRESSOR
MAZAK MODEL U66/120 ''VERSATECH'' CNC VERTICAL / HORIZONTAL 5-SIDED BRIDGE TYPE MACHINING CENTER, WITH 49-1/4'' X 118.11'' T-SLOTTED TABLE, 59.06'' BETWEEN HOUSINGS, 42'' UNDER RAIL, HORIZONTAL 5-SURF
MAZAK MODEL SV-25 ''POWER CENTER'' CNC VERTICAL MACHINING CENTER, WITH 40-POSITION AUTOMATIC TOOL CHANGER, 29-1/2'' X 68-1/2'' T-SLOTTED TABLE, #50 SPINDLE TAPER, MAZATROL CAM-2 CONTROLS
OKAMOTO MODEL PSG-157 27-1/2'' X 59'' AUTOMATIC FEED SURFACE GRINDER, WITH [2] KANETSU 27-1/2'' X 29'' ELECTROMAGNETIC CHUCKS, OVER-THE-WHEEL DRESSER, 7.5kw SPINDLE MOTOR, FINE FEED, COOLANT
UNISIG-KANSAI MODEL KSG-1000NC KNEE TYPE CNCGUN DRILL, WITH 39-1/2'' X 59'' T-SLOTTED TABLE, CHIP CONVEYOR, HIGH PRESSURE COOLANT, FANUC SERVO'S, 5.5kw MOTOR, FANUC OM CONTROLS
MODEL MONOSET TOOL & CUTTER GRINDER, WITH MOTORIZED WORK HEAD, AC MOTOR & CONTROLS
HUPPERT MODEL 12DBMPCIFOT ELECTRIC HEAT TREATOVEN, 10kw, TYPE ST
WATSON-STILLMAN 1500 TON 4-POST UPACTING HYDRAULIC PRESS, WITH 30'' X 30'' PLATEN, HYDRAULIC SYSTEM
MORI SEIKI MODEL SL-25MC5 CNC TURNING CENTER,WITH 10-POSITION TURRET, 3.1'' SPINDLE BORE, 10'' 3-JAW CHUCK, TOOL PRESETTER, MORIC-T4F CONTROLS
SUNNEN MODEL MBB1660 PRECISION HONING MACHINE
HEALD MODEL 273A ID GRINDER, WITH HEALD ''REDHEAD'' SPINDLE, 12'' DIAMETER MAGNETIC CHUCK, 1-1/2HP WORKHEAD MOTOR, 19'' SWING, 500 RPM WORKHEAD, 20'' TABLE TRAVEL, 5HP MAIN DRIVE, 18-1/2'' WORKHEAD C
OKAMOTO MODEL 1632N 16'' X 32'' AUTOMATIC FEED SURFACE GRINDER, WITH 16'' X 32'' ELECTROMAGNETIC CHUCK, RAPID DOWNFEED, AUTO DOWNFEED, COOLANT
OKAMOTO MODEL ACC-20.24DXV 20'' X 24'' AUTOMATIC FEED SURFACE GRINDER, WITH 20'' X 24'' PERMANENT MAGNETIC CHUCK, 3.7kw MAIN SPINDLE DRIVE, FILTRATION, OVER-THE-WHEEL DRESSER, INCREMENTAL DOWNFEED, PR
STUDER MODEL S30 ''LEAN PRO'' 13.8'' X 39.4''UNIVERSAL CNC CYLINDRICAL GRINDER, WITH ID SPINDLE, 6'' DIAMETER MAGNETIC CHUCK, 7.5kw MAIN MOTOR, 41.4'' LONGITUDINAL SLIDE. 10.8'' MAX WHEEL HEAD SLIDE,
KARSTENS MODEL K11 14'' X 28'' UNIVERSAL CYLINDRICAL GRINDER, WITH ID SPINDLE, 8'' MAGNETIC CHUCK, 4kw MAIN MOTOR, APPROXIMATELY 16'' GRINDING WHEEL, WORK REST, PROGRAMMABLE SETTINGS, UNIVERSAL WORK H
JONES & SHIPMAN MODEL 1300X 10'' X 28'' PROGRAMMABLE UNIVERSAL CNC CYLINDRICAL GRINDER, WITH APPROXIMATELY 14'' WHEEL, UNIVERSAL MOTORIZED WORK HEAD, ID SPINDLE, PAPER FILTRATION & COOLANT
MAZAK MODEL V-7.5 CNC VERTICAL MACHINING CENTER, WITH 30-POSITION AUTOMATIC TOOL CHANGER, 15-1/2'' X 37-1/2'' T-SLOTTED TABLE, #40 SPINDLE TAPER & FANUC 6M-B CONTROLS
MAZAK MODEL V-7.5 CNC VERTICAL MACHINING CENTER, WITH 30-POSITION AUTOMATIC TOOL CHANGER, 15-1/2'' X 37-1/2'' T-SLOTTED TABLE, #40 SPINDLE TAPER & MAZATROL CAM M-2 CONTROLS
HAAS 5C COLLET PROGRAMMABLE INDEXER
HAAS MODEL VF-2 VERTICAL MACHINING CENTER, WITH 20HP VECTOR DRIVE, PROGRAMMABLE COOLANT NOZZLE, 14'' X 36'' T-SLOTTED TABLE, 20-POSITION AUTOMATIC TOOL CHANGER, SPINDLE SPEEDS TO 7500 RPM, #40 TAPER S
HARIG 8in. X 18in. HAND FEED SURFACE GRINDER, WITH OPTIDRESS GRINDING FIXTURE
OKAMOTO 6'' X 18'' HAND FEED SURFACE GRINDER,WITH 6'' X 18'' PERMANENT MAGNETIC CHUCK, AC MOTOR & CONTROLS
CHARMILLES MODEL ''FORM 20'' CNC RAM TYPE EDM, WITH 12'' X 15-3/4'' T-SLOTTED TABLE, PROGRAMMABLE, 6'' X 14'' CHUCK, HEIDENHAIN POSITIONING
CHARMILLES MODEL ''ROBOFORM 20'' CNC RAM TYPEEDM, WITH 10'' X 15'' CHUCK, 4-POSITION TOOL CHANGER, 30-1/2'' X 21'' X 13'' WORK TANK, CABINET CNC CONTROLS
CHARMILLES MODEL ''ROBOFORM 20'' CNC RAM TYPEEDM, WITH 12'' X 18'' CHUCK, 26'' X 18'' X 10'' WORK TANK, [3] ROBOTIC 16-POSITION CAROUSEL TOOL CHANGERS, COOLANT, CNC CONTROLS
AGIE MODEL MONDO STAR 50 CNC DIE SINKER EDM,WITH FUTURA V2PM CNC CONTROL, [2] 10'' X 15'' CHUCKS, 21-1/2'' X 29-1/2'' T-SLOTTED TABLE, 42-1/2'' X 28'' X 16'' WORK TANK, [3] ROBOTIC 32-POSITION CAROUS
HARIG 6'' X 18'' HAND FEED SURFACE GRINDER, WITH 6'' X 18'' PERMANENT MAGNETIC CHUCK, AC MOTOR & CONTROLS
BRIDGEPORT MODEL SERIES II SPECIAL CNC VERTICAL MILLING MACHINE, WITH 11'' X 58'' TABLE, SPINDLE SPEEDS 60-4200, PROTO-TRAK M-2 CONTROLS
TRAK MODEL TRL1-745P CNC 17'' X 45'' LATHE, WITH CAMLOC SPINDLE, 3-JAW CHUCK, 5C COLLET FIXTURE, FOLLOW REST, SPINDLE SPEEDS 40-2200 RPM, 2'' SPINDLE BORE, 7.5HP MOTOR, PROTO-TRAK LX2 CONTROLS
HES 16'' X 48'' GEARED HEAD ENGINE LATHE, WITH [2] 3-JAW CHUCKS, 4-JAW CHUCK, STEADY REST, TRACING ATTACHMENT, SPINDLE SPEEDS 36-1800 RPM, COOLANT, AC MOTOR & CONTROLS
TRAK MODEL TRM CNC BED TYPE MILLING MACHINE,WITH 10'' X 45'' TABLE, AUTOMATIC POWER DRAW BAR, 3HP 5'' QUILL TRAVEL, #40 SPINDLE TAPER, SPINDLE SPEEDS 70-4200 RPM,
Mitsubishi Mdl. FG25 Propane Fired Forklift,5000 Lb. cap., double mast with side shift
Butcher Boy Mdl. AU-MF S.S. Frozen Meat Flaker
Mitsubishi Mdl. EDR36 3000 Lb. Cap. Stand-UpForklift,36 volt, dual stage mast w/fork extension mode
Busch Mdl. RAO160 Vacuum Pump
GSE Mdl. 562 Digital Scale, 24" X 24" s.s. top, w/Zebra Labeler
Interpack Mdl. HSD200SS S.S. Carton Taper, adjustable height, top and bottom heads, on wheels
Bizerba Mdl. GV Inline Checkweigher w/price labeler
Koch Ilpra Tray Sealer, Mfg. 2000,FoodPack w/ Smith Mdl. 290-040F Proportional Blender and s.s. accumulator, complete w/spare dies, 2-up 10" X 12", 4-up 6" X 10" & 4-up 6" X 8", w/Busch RAO250 Vacuum
Bizerba Mdl. GV Inline Checkweigher w/price labeler
M-Tek Mdl. Corr-Vac Gas Flush Bag Sealer w/Smith Mdl. 299-040F Proportional Gas Blender
Ulma Mdl. TF-OPTIMA Rollstock Vacuum Packager, Mfg. 2002, complete w/Busch RA250 Vacuum Pump, set-up w/3-up die 4 1/2" W X 10" L X 2" D, includes spare parts and die configurations as follows: 8-up 3
Hobart Mdl. 4246 HD Mixer/Grinder 208 volts, 3 phase
Vemag Mdl. Robot 500 S.S. Stuffer, Type 128-90, 220 volts, 3 phase, w/portion control and knee switch
GSE Mdl. 560 Digital Scale, 24" X 24" s.s. top, 100 lb. cap., w/Datamax I Class Labeler
Fuji/Formost Mdl. FW3710B S.S. Horizontal Form, Fill & Seal Machine w/touch screen
Fuji/Formost Mdl. FW3710B T Horizontal Form,Fill & Seal Machine, 9" W X 15' 7" L belt, touch screen controls, TB Woods E-Trac A/C Converter, Smith Equipment Mdl. 299-040F CO2 and Oxygen Mixer
Autolabe Mdl. 630 Conveyor Automatic Bottom Label Applicator
Bizerba Mdl. GV Incline Checkweigher w/Price Labeler
Ross Mdl. C770N Cube Steak Tenderizer 12" W X 40" L infeed conveyor, 21" L out feed conveyor, complete with s.s. change over cart
Siebeck Trussing Machine Mdl. FRT-MF S.S. BunTier Mfg. 2002, 230 volts
Biro Mdl. 3334 S.S. Band Saw w/aluminum head
Biro Mdl. 3334 S.S. Band Saw w/aluminum head
Ross Mdl. C700MC S.S. Tenderizer
Treif Mdl. Piccolo II Dicer, set-up w/1" grid
GSE Mdl. 562 Digital Scale, 24" X 24" s.s. top, 100 LB cap., complete w/Zebra Mdl. 2746
Safeline S.S. Metal Detector, 14" W X 6" H aperture w/12" W X 53" L intralox through conveyor
Bizerba Mdl. GV Inline Checkweigher w/price labeler
Ross Mdl. OTB-45 Automatic Tray Loader
Ross Mdl. S45 Inpack M.A.P. Tray Sealer set up w/6" W X 8" L with change over set 6" W X 10" L
Hobart Mdl. 4346 S.S. Mixer/Grinder
Wolfking Mdl. SFG/150/100 Mixer/Grinder
Hollymatic Mdl. Super 54 Patty Maker, on s.s.cart w/plate, 8F-3/8
Nutec Mdl. 720 Patty Maker, 460 volts, w/plates 8 oz-3/4 oval, 3:1 1/2 round, 5:1 1/4 round, 4:1 3/4 2-up round, 6 oz 2-up round, 1/2 oval, 1/4, 2-up roun
Hobart Mdl. 4352 S.S. Mixer/Grinder, 7.5 h.p., on wheels, 230 volts
Butcher Boy Mdl. 500/56 S.S. Mixer/Grinder, 230 volts
COMMANDER 750-LB. SCISSOR LIFT W/ ON BOARD CHARGER
5000-LB. ELECTRIC LIFT TRUCK, SOLID TIRES, MODEL ERC050RFN365E084, 42" FORKS, 194" LIFT, 3-STAGE MAST, W/ 36-VOLT
3000-LB. LIFT TRUCK, LP, SOLID TIRES,MODEL S30XL, 42" FORKS, 174" LIFT, 3-STAGE MAST
5000-LB. LIFT TRUCK, LP, SOLID TIRES,MODEL 42-6FGCU25, 42" FORKS, 189" LIFT, 3-STAGE MAST
3000-LB. LIFT TRUCK, LP, SOLID TIRES, MODEL C500-30, 42" FORKS, 153" LIFT, 3-STAGE MAST
3000-LB. LIFT TRUCK, LP, SOLID TIRES, MODEL GC515, 42" FORKS, 188" LIFT, 3-STAGE MAST
5000-LB. LIFT TRUCK, LP, SOLID TIRES,MODEL S50XC, 42" FORKS, 128" LIFT, 3-STAGE MAST
4000-LB. LIFT TRUCK, LP, SOLID TIRES, MODEL GCS-25-1, 48" FORK, 188" LIFT, 3-STAGE MAST
3000-LB. LIFT TRUCK, LP, SOLID TIRES, MODEL T30D, 36" FORKS, 154" LIFT, 3-STAGE MAST, S/N 5GB079C1
5000-LB. LIFT TRUCK, LP, SOFT TIRES, MODEL H50XM, 48" FORKS, SIDE SHIFT, 129" LIFT, 2-STAGE MAST
5000-LB. LIFT TRUCK, LP, SOFT TIRES, MODEL H50XM, 48" FORKS, SIDE SHIFT, 129" LIFT, 2-STAGE MAST
8,000-LB. LIFT TRUCK, LP, SOLID TIRES,S/N 293665, 60" FORKS
60,000-LB. AT 36", 23,800-LB. AT 114" & JIB STAND
LIFT 40/60 LIFT TRUCK 38,200-LB. AT 96" WHEEL BASE, 55,600-LB. AT 146" WHEEL BASE, LP, SOLID TIRES, ROPS
ES140/40 PLASTIC INJECTION MACHINE
350-RS-35F PLASTIC INJECTION MACHINE
325-RS-25 PLASTIC INJECTION MACHINE
32' 5-TON BRIDGE CRANE W/ 5-TON RM HOIST & 6-WAY PENDANT CONTROL & 92' OF RUNWAY
ROTARY SCREW AIR COMPRESSOR, MODEL GA37, HOURS 22795
150-TON SHOP PRESS 48" BETWEEN HOUSING
GRANULATOR, S/N G8
1831K GRANULATOR W/ BLOWER & FILTER UNIT
Color Blender
CUMBERLAND 184GRAN-2KN GRANULATOR
150-RS-12-5F PLASTIC INJECTIONMACHINE
PS60E9ASE PLASTIC INJECTION MACHINE
125-RS-8F PLASTIC INJECTION MACHINE
75-RS-5F PLASTIC INJECTION MACHINE
MILACRON VSX33-297 PLASTIC INJECTION MACHINE
400H-RS-48F-LP PLASTIC INJECTION MACHINE
MD-25 DRYER/HOPPER & VACUUM LOADER
75-RS-5F PLASTIC INJECTION MACHINE
75-RS-5F PLASTIC INJECTION MACHINE
M300SSV14 PLASTIC INJECTION MACHINE
25R PLASTIC INJECTION MACHINE
MILACRON VECTOR CH90-R PLASTIC INJECTION MACHINE
40/40 PLASTIC INJECTION MACHINE
400HPE-30F PLASTIC INJECTION MACHINE
450-RS-60F PLASTIC INJECTION MACHINE
450-RS-60F PLASTIC INJECTION MACHINE
MILACRON 350-30 PLASTIC INJECTION MACHINE
450-RS-60F PLASTIC INJECTION MACHINE
MD-25 DRYER/HOPPER
150-RS-8F PLASTIC INJECTION MACHINE
M300SSV14 PLASTIC INJECTION MACHINE
MD-25 DRYER/HOPPER/VACUUM LOADER
150-RS-8F PLASTIC INJECTION MACHINE
150-RS-8F PLASTIC INJECTION MACHINE
300-RS-20F-HT PLASTIC INJECTIONMACHINE
300-RS-20F-HT PLASTIC INJECTIONMACHINE
MD-25 DRYER/HOPPER/VACUUM LOADER
DEMAG 170-HT-14 PLASTIC INJECTION MACHINE
300-RS-20F-HT PLASTIC INJECTIONMACHINE
200-RS-14F PLASTIC INJECTION MACHINE
Blender
MILACRON H375-32 PLASTIC INJECTION MACHINE
200-RS-14F PLASTIC INJECTION MACHINE
200-RS-14F PLASTIC INJECTION MACHINE
200-RS-8F PLASTIC INJECTION MACHINE
200-RS-37 PLASTIC INJECTION MACHINE
200-RS-20F PLASTIC INJECTION MACHINE
MD-50 DRYER/HOPPER/VACUUM LOADER
260-RS-14FL.P. PLASTIC INJECTION MACHINE
200-RS-14F PLASTIC INJECTION MACHINE
200-RS-30F PLASTIC INJECTION MACHINE
MD-50 DRYER/HOPPER/VACUUM LOADER
260H-RS-14FLP PLASTIC INJECTIONMACHINE
250-RS-14F PLASTIC INJECTION MACHINE
200-RS-20F-VV PLASTIC INJECTIONMACHINE
260H-RS-14FLP PLASTIC INJECTIONMACHINE
250-RS-20F-VV-VB PLASTIC INJECTION MACHINE
MILACRON 700-TON PLASTIC INJECTION MACHINE
MILACRON VH800-76 OZ. PLASTICINJECTION MACHINE
MILACRON H500-70 PLASTIC INJECTION MACHINE
MILACRON 1000-225 W/P PLASTICINJECTION MACHINE
SEPRO S900 ROBOT
MILACRON VL1000W-232 PLASTIC INJECTION MACHINE
MILACRON 1200-220 NATCO PLASTIC INJECTION MACHINE